43ST2203 Ultra HD Smart LED TV
User Manual
43ST2203/50ST2204/50ST2205/55ST2204/55ST2205
65ST2205/75ST2205/85ST2205/50ST3204/55ST3204/65ST3204

Safety Information

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
High voltages are used in the operation of this product.to reduce the risk of electric shock,do not remove cover of the cabinet, refer servicing to qualified service personal
If the TV any changes or coarse adjustment, electric shocks to be hurt, do not attempt to open a machine-maintenance, customer contact centres needed overhaul.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating in the literature accompanying the appliance.
Warning
The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Important Safety Precautions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at Plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used caution when moving the cart/apparatus combination to avoid injury tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.
    Caution:

14. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

15. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

16. The socket-out shall be installed near the equipment and shall be easily accessible.

17. This product should never be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacture’s instructions have been adhered to.

18. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus.

19. Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).

20. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

21. Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times.

22. The USB terminal should be loaded with 0.5 A under normal operation. These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. unless you are qualified to do so.

23. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

24. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

25. The maximum using environment temperature is 45 degrees. The Maximum using altitude is 2000 meters

Main Unit Description

50ST3204/55ST3204/65ST3204

a: Press 1 key to achieve (0 0 +-) Functional operation.
b: Press the call out function menu once, and press the twice or so to move the switch function icon.
( Note: The first press of this button will default to the first icon )
c: Long press the button to confirm entering this function, use (A + -) implement related functional operations.

right.
2| POWER INDICATOR| Indicator illuminates RED in standby mode and GREEN when TV is switched on
3| REMOTE SENSOR| Infrared sensor for the remote control.

functionalities.
3| OPTICAL| Optical Digital Audio ouput.
4| VIDEO L/RIN| Video and Audio(L/R) input terminal.
5| ANT| Connect the antenna or 75 Ohm coaxial cable to receive TV signal.
6| HDMI INPUT| Connect the HDMI output jack of DVD.
7| CI IN| Connect a card to get permission to receive DTV signals.
8| HEADPHONE| Connect the headphone
9| AC| Connect to an earth 100-240V~ 50/60 Hz AC outlet with the power cable.

Please note:
When you use a USB with an external device, if the current is too large, the external equipment will need an external power supply {such as a mobile hard disk or mobile drive).

functionalities.
3| OPTICAL| Optical Digital Audio output
4| VIDEO L/R IN| Video and Audio(L/R)input terminal.
5| ANT| Connect the antenna or 750 h m coaxial cable to receive TV signal.
6| HDMI INPUT| Connect the HDMI output jack of DVD.
7| CI IN| Connect a card to get permission to receive DTV signals.
8| HEADPHONE| Connect the headphone
9| AC| Connect to an earth 100-240V— 50/60 Hz AC outlet with the power cable.

Please note:
When you use a USB with an extemal device, if the current is too large, the external equipment will need an external power supply (such as a mobile hard disk or mobile drive).

Main unit description

43ST2203/50ST2204 50ST2205/55ST2204/ 55872205/65ST2205/75ST2205/85ST2205

Control Panel Button Function

Display\hidden button menu: press the button in the pop-up menu, as shown below. The button menu will be closed automatically after the button is not operated for 5 seconds.
Button function selection: press the button shortly, move the focus to the right, and select the corresponding function, such as the short press on the button for 6 times the focus position as shown in the below picture. Press the button for a short time, and the focus is back to the position shown in the above picture.
Key function operation: lonely press key can perform focus function, such as focus in the position shown above, will perform channel reduction.

| Power off function, which corresponds to the “power” button of the menu.
---|---
| Display the menu ,which corresponds to the “menu” button of the remote control.
| Display the signal source menu, which corresponds to the “signal source” button of the remote control.
| Increase the volume ,which correspond to the “volume + ” button of the remote control.
| Decrease the volume ,which correspond to the “volume -” button of the remote control.
| Switch the channel forwards,which correspond to the “channel +” button for the remote control.
| Switch the channel backwards,which correspond to the “channel -“ button for the remote control.

43ST2203/50ST2204/50ST2205/55ST2204/55ST2205/5ST2205

75ST2205/85ST2205

Remote control

: To use the button’ Press and hold more than 1 second Need to register this

Magic Remote first.
POWER( ****): Turns the TV on or off.
( ): You can turn on/off the power of the set-top box by adding the box to universal remote in TV. LIST: Checking the Channel List.
O#: The QUICK ACCESS edit screen appears. Number buttons: Choose the channel directly
( • • •): It displays the additional function on the remote control. (AD/SAP)#: Second Audio Program. (Some models may not be supported.
( +1— ) : It adjusts the volume level.
( ) :Select to turn off the sound from the TV.
( :Enter the Accessibility menu.
( ∧/∨ ): You can change the programme up or down.
( ): Check out the recommended contents.
(Recommendation service may not be available depending on the countries you are in.) Push and hold the button while speaking to use the voice recognition function Go to All setting -.General-al Service-.Voice Recognition help for more voice command
( ): Displays the Home menu.
( )ff: Displays the last used APP, You can also select to close then.
( ):Enters the Quick Settings menu.
( )#: Enters the All Settings menu.
( ): Move to the previous step.
( )#:Closes the menu. GUIDE: Check the programme schedule.
( ): Selects an input source
( )#: Entering into the Home Dashboard.
  Wheel (ok):press the center button to select, Tum upor down to scorl channels.
Navigation buttons: (Up/Down/Left/Right / ) Navigate the menu.
PLAY (►): Play while watching media.
PAUSE ( II ): Pause while watching media.
MOVIES: Search Movies.(make sure the Internet connection is normal)
NETFLIX: Access the Netfiix interface.
Prime Video: Access the Prime Video interface. Color Buttons(RED/GREENIYELLOW/BLUE): Execute the prompt function in specific mode.

Home page

Enter the Home page after First Time install.

Search
You can search for channels, programmes, movie
titles and apps from Smart Hub.
Home Dashboard
You can select or control a device (mobile, external device, Home IoT Devices, etc.) connected to the TV.
For more information, see Connecting External Devices Using Home Dashboard in User Guide.
TV
Move to the TV input you used recently.
Recents
Move to the recently used app.You can run or close a recently used app in the list provided in the Preview area at the top.

Using Home Dashboard
You can select or control a device (mobile, external device, Home loT Devices, etc.) connected to the TV.
Press / button to select .

1. You can check and select the smart device connected with the LG ThinQ app. Please refer t o Connecting External Devices — Connecting Smart Devices in
   User Guide for more information on the action.

2. You can play sound from a smart device connected via Bluetooth.
   Please refer t o Connecting External Devices — Playing Sound from a Smart Device through the TV ’ s Speakers i n User Guide for more information on the
   action.

3. You can check and select the external device connected through the external input port o r network.

4. The currently selected output speaker is displayed, and you can navigate to the output speaker settings screen.

5. You can view and select the connected storage device.

6. You can check and control the device connected via the Home loT.
   Please refer t o Connecting External Devices — Connecting Home loT Devices in User Guide for more information on the action.

7. You can easily control your device by presetting the desired operations.

8. Sign In : You can log in/out to and from the LG ThinQ account you created on mobile.

9. Edit : You can edit the name of the device connected to Inputs or Home loT
   Devices o r configure the related settings.

10. It refreshes the device list.

11. Exit the Home Dashboard.

TV Setting
Press MENU button to enter the TV Setting.
Press button to highlight the desired menu icon , and press OK button to select.
Quick Settings

1. You can set Picture Mode.
2. You can set Sound Mode.
3. You can choose Sound Out.
4. You can set Sleep Timer.
5.  Move to the Connection screen.
6.  You can set more options.
7. You can add/delete the quick setting items or change their order.

Picture
Press MENU button to enter the main menu. Or press button to select Setting on the Home page.
Press button to select the Picture.
Press OK button to enter the sub-menu.

Press button to select Picture Mode Settings/Aspect Ratio Settings/Energy
Saving/Additional Settings .
Press MENU or EXIT button to quit.
Picture Mode Settings
Highlight the item and press OK button to enter the sub-menu, that shows the picture mode you can choose.
Press ▼/▲  button to select Picture Mode/Backlight/Contrast/Brightness/Sharpness/Colour/ TinColour Temperature/Advanced Controls/Picture Options/apply t o all inputs/Reset.

Picture Mode
Press ▼/▲  button to select Vivid/Eco/Cinema/Sports.

Vivid Sharpens the image by increasing the contrast, brightness and sharpness.
ECO The Energy Saver feature changes settings on the TV to reduce power consumption.
Cinema Is suitable for watching TV or movies in a dark room.
Sports Suitable picture for sports games. Sharpens the image of rapid movements such as kicking or throwing a ball.
Backlight/ Contrast/ Brightness/ Sharpness/ Colour/ Tint/ Colour Temperature
Press ▼/▲ button to select BackIght/Contrestanghtness/SharpnessiColcue Tint/ Colour Temperature.
Press  button to adjust.
Advanced Controls
Press ▼/▲button to select Advanced Controls. (Optional: Dynem:c ContrasVDynamIc Colour/Gamma)
Dynamic Contrast/Dynamic Colour
Press ▼/▲ button to select Dynamic ContrasVDynanttc Colour,prees OK button to select OWLow/Med urn/ High.
Gamma
Press ▼/▲ button to select Gamma:press OK button to seem LowdAed urnblIgh 1/High 2.
Picture Options
Press ▼/▲ button to select Picture Options. (Optional: Noise Reduction/Black LeveUReal Cinema)
Noise Reduction
Press ▼/▲button to select Noise Reduction.press OK button to select Off/Low/MediunVfloh Auto.
Black Level
Adjusts the brightness o’ the dark parts of images.
Press ▼/▲button to select Black Levetixess OK button to select.
Real Cinema
Optima* display for movies.
Press▼/▲ button to select Real Cinema:press OK button to select
Apply to all Inputs
Apply to all inputs Apply the detailed sarong values of current picture mode to ell inputs or apps
Press ▼/▲button to select Apply to all inputs.
Reset
If you want to reset the image settings to the factory defaults after ccofigunng the image settings. select reset for each image mode.
Press ▼/▲button to select Reset.
Aspect Radio Settings
You can change the screen size according t o the type of content you are watching.
Press ▼/▲ button to select Aspect Radio/ Just Scan.
Aspect Ratio
Press ▼/▲  button to select Aspect Ratio.
(Optional: 16:9/ Original/ Full Wide/ 4:3/ Vertical Zoom/ 4-Way Zoom)
Just Scan
Press ▼/▲ button to select Just Scan.
If you turn this feature On, you can view the content i n the aspect ratio that is in the broadcast signal or content source. If the edge of the screen is not clean, please turn it Off
Energy Saving
Reduces power consumption by adjusting screen brightness.
Press ▼/▲ button to select Off/ Minimum/ Medium/ Maximum/ Screen Off.
Eye Comfort Mode
The colour temperature will be adjusted to reduce eye fatigue.
Press button to select Off/On.

Sound
Press MENU button to enter the main menu. Or press button to select Setting on the Home page.
Press▼/▲ button to select the Sound.
Press OK button to enter the sub-menu.

Press ▼/▲button to select Sound Mode Settings/Sound Out/Additional Settings.
Press MENU or EXIT button to quit.
Sound Mode Settings
Highlight the item and press OK button to enter the sub-menu, that shows the sound mode you can choose.
Press ▼/▲ button to select Sound Mode/ Balance/ Virtual Surround Plus/Equalizer/ Reset.
Sound Mode
Press ▼/▲button to select
Standard/ Cinema! Clear Voice Ill! Sports/ Music/ Game. Standard Optimises the sound for all types of content.
Cinema Optimises the sound for cinemas.
Clear Voice Ill Boosts voice clarity.
Sports Optimises the sound for sports games.
Music Enhance the high pitch and reduce the bass.
Game Optimises the sound for gameplay.
Balance
Balanced left and right channels.
Press ▼/▲ button to select Balance.Press button to adjust.
Virtual Surround Plus
Enjoy an immersive soundscape with the virtual multi-programme surround sound effect.. Press ▼/▲ button to select Virtual Surround PIus.Press OK button to select On/Off.
Equalizer
Press ▼/▲ button on to select Equalizer. Press OK button to enter sub-menu then press button to adjust.
Reset
You can reset the sound effect settings. Press ▼/▲button to select Reset.
Sound Out
Press▼/▲button to select Internal TV Speaker/ Bluetooth! Mobile Device! Optical/ HDMI ARC/ Wired Headphones) Optical + Internal TV Speaker! Wired Headphones + Internal TV Speaker.
Press ▼/▲ button to select and press OK button to setup.
Additional Settings
Press ▼/▲ button to select TV Installation Type/ Volume Mode/ DTV Audio Setting/ AV Sync Adjustment! HDMI Input Audio Format! LG Sound Sync/ Digital Sound Out.
TV Installation
Type Press ▼/▲ button on to select TV Installation Type.
Press ▼/▲button to select Stand) Wall-mounted.
Volume Mode
Press ▼/▲button on to select Volume Mode. (Optional: Auto Volume/ Volume Increase Amount) Auto Volume
Press ▼/▲ button on to select Auto Volume.Press OK button to select On/Off. Volume Increase Amount
Press ▼/▲ button on to select Volume Increase Amount. (Optional: Low/Medium/High)
DTV Audio Setting
Press V / ♦ button on to select DIV Audio Setting. (Optional: MPEG/ Dolby Digital/ Dolby Digital Plus/ HE-AAC/Auto)
AV Sync Adjustment
Press ▼/▲ button on to select AV Sync Adjustment.Press OK button to enter and adjust
HDMI Input Audio Format Press ▼/▲ button on to select HDMI Input Audio Format. You can set the audio format for each HDMI input. When the voice delivered through the HDMI port is not synchronized, set it to PCM.
LG Sound Sync
Press ▼/▲button on to select LG Sound Sync. Connect the LG Sound Sync device to the optical digital input port and set Sound Out to Optical. By setting this feature to On. you can adjust the volume of the connected LG Sound Sync device using a TV remote control.
Digital Sound Out
Press ▼/▲ button on to select Digital Sound Out. (Optional: PCM/Auto/Pass Through)
Programmes
Press MENU button to enter the main menu. Or press button to select Setting on the
Home page.
Press ▼/▲ button to select the Programmes.
Press OK button to enter the sub-menu.
Press ▼/▲ button to select Programme Tuning & Settings/Programme Manager/HbbTV/Cl Information/Copy Programmes.
Press MENU o r EXIT button t o quit.
Programme Tuning & Settings
Highlight the item and press OK button to enter the sub-menu.
Press ▼/▲ button to select Auto Tuning/ Manual Tuning/ Programme Mode/Programme List Update/ Signal test.

Auto Tuning
Automatically tunes the programmes.
Press ▼/▲ button to select Auto Tuning.(Optional: Antenna/Cable/Satellite)
Then press ▼/▲ button t o select Next button to setup and tuning.

Manual Tuning
This function is for manually searching and saving programmes.
Press ▼/▲ button to select Auto Tuning.(Optional: Antenna DTV/Antenna TV)
Then press ▼/▲button to select Next button to setup and tuning.

Programme Mode
Press▼/▲button to select Programme Mode.(Optional: Antenna/Cable/Satellite)
Programme List Update Press▼/▲button to select Programme List Update. Press OK button to select On/Off.
Signal Test
Shows the MUX and Service information etc. Press▼/▲ button to select Signal Test. Note: It is only available in Antenna or Cable mode.
Programme Manager
Highlight the item and press OK button to enter the sub-menu. Press ▼/▲ button to select Programme Manager. You can lock or unlock the selected programmes from all the stored programmes, or you can set them to be skipped when switching programmes.
Edit All Programmes

1. Set the sorting option.
2. Lock / Unlock : Lock the selected programmes or unlock the locked programmes.
   Skip / Restore : Set the selected programmes to be skipped when switching programmes. or disable the skipping option of the programmes previously set to be skipped. Move : Move the selected programmes.
   Edit Programme Numbers : Change the numbers of the selected programmes. Delete : Delete the selected programmes.
   Edit Favourites

1. Select the desired programmes from the all programmes list and press the button to add them to the favourite programmes list.
2. Delete the selected programmes from the favourite programmes list
3. Move : Select one or more programmes in the Preferred Programmes list, press the Move button, and then select the position to move it to. The selected programmes will move to the position you selected.
   Change Group Name : Change the name of the favourite programmes list.
   Sort by Programme : Sorts the list of favourite programmes by programme.

HbbTV
Press ▼/▲ button to select HbbTV.Press OK button t o enter sub-menu.
Press ▼/▲ button to select.

Cl Information/Copy Programmes
Press ▼/▲button to select Cl Information/Copy Programmes.Press OK button to enter sub-menu.
Connection
Highlight the item and press OK button to enter the sub-menu.
Press ▼/▲ button to select Connection.

Wi-Fi Connection
Press ▼/▲ button to select Wi-Fi Connection.Press OK button to enter sub-menu and setup.

Device Connection Settings
You can link the information about the devices connected t o the TV and configure settings related to operations.
Press▼/▲ button to select Device Connection Settings . Press OK button t o enter sub-menu.

Auto Device Detection/SIMPLINK(HDMI-CEC)/Auto Power Sync
Press ▼/▲ button to select Auto Device Detection/SIMPLINK(HDMI-CEC)/Auto Power Sync.Press OK button t o select On/Off.
LG Wireless Keyboard
Press ▼/▲ button to select LG Wireless Keyboard.Press OK button to enter sub- menu.
This feature enables you t o connect a LG wireless keyboard to your TV.
Turn on the device, set it to pairing mode, and then click Connect on your TV screen. If there is a LG wireless keyboard previously connected, it will be automatically reconnected to your
TV once your TV turns on. To disconnect the existing connection, click Disconnect.
Universal Control Settings
Press ▼/▲ button to select Universal Control Settings . Press OK button to enter sub-menu.
If you set up the universal remote control, you can control peripheral devices connected to the TV with the Magic Remote instead of their own remote controls .

Mobile Connection Management
You can set to use a smart device connected to the TV to control the TV o r manage the connection history.
Press ▼/▲ button to select Mobile Connection Management.Press OK button to enter sub-menu.

TV On With Mobile
Press ▼/▲button to select TV On With Mobile.Press OK button to enter sub-menu.
If Turn on via WI-FI or Turn on via Bluetooth is set to On, you can turn on your TV using an application that supports TV On With Mobile.
Screen Share Press ▼/▲ button to select Screen Share.Press OK button to setup. You can delete the connection history of the device that was connected to the TV through Screen Share.
Sound Share
Press ▼/▲ button to select Sound Share.Press OK button to setup.
You can delete the connection history of the smart device that was connected to the TV via Bluetooth.
General
Highlight the item and press OK button to enter the sub-menu.
Press ▼/▲ button to select General.

Al Service
You can enable the recommended services based on the usage history.
Press ▼/▲ button to select Al Service.Press OK button to enter sub-menu.

Voice Recognition Help
Press ▼/▲ button to select oice Recognition Help.Press OK button to setup.
You can see the list of features you can use through voice control.
Voice Recognition Settings
Press ▼/▲ button to select Voice Recognition Settings.Press OK button to setup. You can apply settings for voice recognition features.
Al Recommendation
Press▼/▲ button to select Al Recommendation.Press OK button to enter sub-menu. You can apply settings for voice recognition features.
Content Recommendations
Press ▼/▲button to select Content Recommendations.Press OK button to select ONOff.
Network-Based Personalisation Recommendations
Press ▼/▲button to select Network-Based Personalisation Recommendations.Press OK button to select ONOff.
Delete Usage Data Press ▼/▲ button to select Delete Usage Data.Press OK button to select. It resets the content view history and the app usage history. If you reset them, it takes some time to receive recommendations for contents again.
Language
You can choose the menu language displayed on the screen and the audio language of the digital broadcast.
Press ▼/▲button to select Language.Press OK button to enter sub-menu. (Optional:Menu Language / Primary Audio Language / Secondary Audio Language / Keyboard Languages / Primary Teletext Language / Secondary Teletext Language)
Press ▼/▲ button to select the menu and setup the language.
TV Name
You can use the screen keyboard to set the name for the smart TV to be used on the network.
Press ▼/▲ button to select TV Name.Press OK button to enter sub-menu.
Network Connection Settings
If you configure settings for the network, you can use various services such as online contents and applications.
Press ▼/▲ button to select Network Connection Settings.Press OK button to enter sub-menu.

Wired Connection(Ethernet)
Press ▼/▲ button to select Wired Connection(Ethernet) Press OK button to enter sub-menu and setup.

Location
You can change the location setting of your Smart N.
Press ▼/▲ button to select Location.Press OK button to enter sub-menu.

Broadcast Country
You can set the broadcast country on your N.
Service Area Postcode
This function is used to set the broadcast location of the TV by entering your postcode.
Services Country
If you don’t set the Set Automatically, you can select the country manually.
Time
You can check the time or configure related settings.
Press ▼/▲ button to select TIme.Press OK button to enter sub-menu.

Set Automatically
The TV time is automatically set to the time of digital broadcasting information sent from the broadcasting station or the time sent from the server.
Press ▼/▲ button to select Set Automatically.Press OK button to select On/Off.
Time / Date / Time Zone
You can manually set the time and date if the automatically set current time is incorrect. Press ▼/▲button to select Set Time / Date / Time Zone. Press OK button to select.
Custom Time Zone
When select the Custom in Time Zone, Custom Time Zone menu is activated. Press ▼/▲ button to select Custom Time Zone.Press OK button to select.
Timers
Press ▼/▲ button to select Timers.Press OK button to enter sub-menu.

Sleep Timer
Press ▼/▲ button to select Sleep Timer.
Press ▼/▲ button to select Off/lOmin/20minf3Omin/60min/90min/120min/180min/240min.
Power On Timer
Press ▼/▲ button to select Power On Timer.Press OK button to enter sub-menu to setup.
Power Off Timer
Press ▼/▲ button to select Power Off Timer. Press OK button to enter sub-menu to setup.
4 Hours Auto Power Off
Press ▼/▲ button to select 4 Hours Auto Power Off.Press OK button to select On/Off.
Safety
Press ▼/▲ button to select Safety.Press OK button to enter sub-menu. All the Options are available only when the Safety select On. The initial password is set as -0000″.

Press ▼/▲ button to select the option then press OK button to setup.
Account Management
Press ▼/▲ button to select Account Management.Press OK button to enter sub- menu. In Account Management, you can use your email address to create a new LG account.

Home Settings
Press ▼/▲ button to select Rome Settings.Press OK button to enter sub-menu.
Home Auto Launch
Press ▼/▲ button to select Home Settings.Press OK button to select On/Off.
Additional Settings
Press ▼/▲ button to select Additional Settings.Press OK button to enter sub- menu.

Accessibility
Highlight the item and press OK button to enter the sub-menu.
Press ▼/▲ button to select Accessibility.

Audio Guidance
Press▼/▲ button to select Aust.:, Guidance.Press OK button to enter sub-menu.
AM the Options are availed* only when the Audio Guidance select On.
Audio Description
Press ▼/▲ button to select Audio Description. ress ▼/▲ button to adjust. It is only available when Audio descnption setting ON.
Audio Description Volume
Press ▼/▲ button to select Mesa Description Volume.Press OK button to select On/Off.
High Contrast/Grayscale/Invert Colours/Hard of Hearing
Press ▼/▲ button to select High Contrast/Grayscale/Invert Colours/Hard of Hearing. Press OK button to select On/Off.
Subtitles
Press ▼/▲ button to select Sublitles. Press OK button to enter sub-menu.
Then press ▼/▲ button to select and setup.
Support
Highlight the item and press OK button to enter the sub-menu.
Press ▼/▲ button to select Support.

Software Update
Uses software update to check and obtain the latest version.
Press ▼/▲button to select Software Update.Press OK button to enter sub-menu.
Then press ▼/▲ button to select and setup.
Allow Automatic Updates
Press ▼/▲ button to select Man Automatic Updates.
II set to On. updates WI be proceeded automatically without asking when there Is a new update after a version check.
Check for updates
Press ▼/▲button to select Check for updates.Press OK button to select O&011.
TV Information
You can view information including Model. Serial Number, Device Name.
Press ▼/▲ button to select TV Information.Press OK button to enter sub menu.
Notifications
Press ▼/▲button to select Noblications. Press OK button to enter sub-menu.

1. You can check the deteas by selecting the desired item. If It Supports shortaAS you can launch the app.
2. You can delete notification.
3. You can delete all notifications.

Additional Settings
Press ▼/▲ button to select Additional Setengs. Press OK button to enter sub- menu.
User Agreements
Press ▼/▲ button to select User Agreements.Press OK button to select. These are the tense and conditions far privacy for the use of Smart TV-related services.
Legal Notice
Press ▼/▲button to select Legal Notioe. Press OK button to select. Ifs a legal notice for services provided via TV.
Open Source Software Notice
Press ▼/▲button to select Legal Notice. Press OK button to select. You can view the instructions for each hem.
Reset to Initial Settings
Press ▼/▲ button to select Reset to Initial Settings.Press OK button to enter sub-menu. Return TV to its initial settings. This wil revert all settings to their default values.
After reset, the TV will automatically turn off and on.
Note: If Safety is set to On, you should type the password to Reset to Initial Settings.

Media

Connect a USB storage device (USB HDD, USB stick) to the USB port on the TV to enjoy the content files stored on the USB storage device on your TV.
Viewing Photos and Video
You can view photos and videos using the Photo & Video app.

1. Select your desired type of content and viewing method.
2. Select and delete the desired content.
3. Select the content you want to play. You can only select the same type of content as you first selected.
4. You can copy content to a USB storage device.
5. Launch Search.

Using Photo Player
Selecting a photo in the Photo & Video app runs the photo player. You can view your saved photos.

1. Retums to the entire content list.
2. You can play background music by running the music player.
3. You can zoom in/out of the photos.
4. Starts the slide show.
5. Rotates photos.
6. 360-degree photos can be viewed in 360 degrees.
7. You can set the size of a photo or change the speed and effect of a slide show.

Using Video Player

Selecting a photo in the Photo & Video app runs the photo player. You can view your saved videos.

1. Retums to the entire content list.
2. You can select other content by displaying the playlist while watching a video.
3. You can control basic video playback functions.
4. Rotates video.
5. 360-degree videos can be viewed in 360 degrees.
6. You can do the settings related to play on repeat of the video.
7. You can set additional options.

Playing Music

You can listen to music by using the Music app.

1. Select the desired type of content list.
2. Select and delete the desired conten.
3. Select content and add it to My Playlist.
4. You can copy content to a USB storage device.
5. 0pen the music player.
6. Launch Search.

Using Music Player
You can play music conveniently by selecting the music files saved in the Music app or by selecting the music player icon during content playback in apps such as Photo & Video.

1. You can play music from the selected storage device.
2. You can set repeat playback and random playback.
3. The configurable items differ depending on mode.
4. You can change the position of the music player.
5. You can minimize the music player.
6. This feature closes the music player.
7. Lyrics are available for music files that provide them.
   In some music files, you can choose a lyric section and move the playback position.

SPECIFICATIONS

Help

No power| •Check if the AC cord of TV is plugged in or not. If there’s still no power, please disconnect the plug, and reconnect to the socket after 60 seconds. Turn the power back on.
---|---
Signal not received properly| •Double or phantom images may appear on your TV if there are high buildings or mountains close to where you are. You can adjust the image thru manual operation: consult instruction of vernier regulation, or adjust the direction of the external antenna.
•If you use an indoor antenna, signal reception may be more difficult under certain circumstances. Adjust the direction of the antenna for optimum reception. If this does not improve reception, you may have to switch to an external antenna.
No picture| •Check if the antenna at the back of the TV is connected properly.
•View other channels to see if the problem still occurs.
Video appears with no audio| •Try increasing the volume.
•Check if the N’s sound is on mute or not.
Audio is present,
but video does not appear or is discolored| •Try adjusting the contrast and brightness.
Static noise affects video and audio quality| •Check if the antenna at the back of the N is connectedproperly.
Broken lines on screen| •Electrical appliances such as hair dryers or vacuums etc. may be interfering with your N set. Switch these appliances off.
Remote doesn’t work| •Make sure the plastic bag which came with the remote control is removed. Try using the remote in a shorter distance from the N. Check if the placement of the batteries is correct, or try using new batteries with the remote control.
•The TV will go into Standby mode if it receives no response in a few minutes.
No video (PC mode)| •Please check if the cable is connected to the VGA port correctly, or if the cable is bent in some places.
Vertical line blinking (PC Mode)| •Enter the main menu, and adjust the vertical placement to eliminate the vertical line.
Horizontal tearing (PC Mode)| •Adjust the horizontal placement of the screen to clear any horizontal lines.
Screen is too bright or dark (PC Mode)| •Adjust the brightness or contrast in the main menu.
No response from the PC| •Check if the PC’s display resolution is set to a compatible resolution for the TV.
Lines appearing when a device
is connected to the RCA port| •Make sure you are using a cable in good quality.
Problems are unresolved| •Unplug the power cable and wait for 30 seconds, then reconnect to the socket. If problems still persist, do not attempt to repair the N by yourself. Kindly contact the service center.

Do not leave your TV displaying a static image, whether it is from a paused video, menu screen, etc. for an extended period of time, doing so will damage the display and may cause image burn-in.

WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

1. Using cabinets or stands recommended by the manufacturer of the television set.
2. Only using furniture that can safely support the television set.
3. Ensuring the television set is not overhanging the edge of the supporting furniture.
4. Not placing the television set on tall furniture (for example, cupboards or bookcases).without anchoring both the furniture and the television set to a suitable support.
5. Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture,
6. Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.
Wall-mounted screw:22-24inch M4, 28-70inch M6, 75inch M8 Note:don’t hang at an angle to avoid the risk of falling off.
The actual effects and functions of some products will be fine-tuned, please refer to the actual product.

MANUFACTURER / IMPORTER COMPANY
SKY INOVASYON VE TEKNOLOJI A.S. :
Baak§ehir Mah. Hurnyet Bulvari
No: 119 Basa4ehir/ Istanbul/ TOrkiye
Phone Number :444 23 30 (pbx)
[email protected] / www.skytech.com.tr
USING LIFE SPAN IS 10 (TEN) YEARS.

References

• SKYTECH

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>