MINISO 2310 Bicolor Wireless Headset User Manual
- September 19, 2024
- MINISO
Table of Contents
USER MANUAL
BICOLOR WIRELESS HEADSET
MODEL: 2310
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY
Product Parts
1. MIC/LED Light
2. Type-C Charging Port
3. 3.5mm Audio Port
4. Power| 5. Mode
6. Volume+/Next
7. Volume-/Previous
8. TF Card Slot
---|---
Accessories
- Device* 1
- Charging Cable* 1
- User Manual* 1
Product Parameters
Bluetooth | V5.0 | Frequency Response | 20Hz-20KHz |
---|---|---|---|
Pairing Name | MINISO-2310 | Sensitivity | ≥ 95±3dB |
Function | Multimedia, phone calling | Charging Port | Type-C |
Charging Input | 5V 180mA | Transmission Distance | ≤ 10m |
Battery Capacity | 200mAh | Charging Time | 1.5H |
Music Playback Time | ≤ 10H (volume 50%) | Calling Time | ≤ 10H (volume 50%) |
Impedance | 32Ω | Operating temperatue | 0-40°C |
Functions
Function | Instructions |
---|---|
Turn On | Long press power button for 3 seconds to turn on, blue light is on |
for 2 seconds
Turn Off| Long press power button for 3 seconds to turn off, light turns off
Bluetooth| Bluetooth turns on, search for the pairing name of MINISO-2310 then
press to connect
Low Battery Alarm| When the battery is lower than 3.3V (20%), a voice prompt
will be played every 30 seconds, blue light blinks
Previous Track| Press volume- button to move to previous track, blue light
blinks
Next Track| Press volume+ button to move to next track, blue light blinks
Volume-| Long press volume- button to turn volume down, blue light blinks
Volume+| Long press volume+ button to turn volume up, blue light blinks
Play/Pause| Press power button to play/pause the music, blue light blinks
Answer Call| Press power button to answer a call, blue light blinks
End Call| Press power button to end a call, blue light blinks
Reject Call| Long press power button for 2 seconds to reject a call, blue
light blinks
Call Back| Press power button to call back last number, blue light blinks
Line in| Supports Line IN music when turned off, plug 3.5mm jack and the
earphones will turn off automatically
TF Card| Press mode button to switch to TF card mode
Cautions
- Reasonable control of the volume and time of usage is required to avoid hearing damage.
- For your safety, do not use it in potentially hazardous condition.
- Do not listen to music, call up or answer the phone while driving to avoid danger caused by distraction.
- Keep it out of reach of children to avoid danger caused by improper use.
- Do not throw to avoid damage caused by dropping.
- Do not store or use it under -20°C or above 45°C to avoid shortening the lifespan of earphones and battery.
- Do not modify, disassemble or repair the product.
- Irreplaceable battery. It should be disposed of according to local rules & regulations or be recycled by professional institute. Do not throw away or toss into fire.
- When not in use for a long time, charge the earphones once every 3 months to extend its lifespan.
- Avoid contact with water and other liquids to prevent them from penetrating into the product.
Troubleshooting
-
Fail to pair the wireless earphones with your cellphone.
Solution: Check if the earphones are in pairing mode, and whether the phone BT function is on. Check the list on your phone, remove the earphones from the list, follow the instructions of user manual to pair the earphones with your phone again. -
Cannot turn on the wireless earphones.
Solution: Check the battery to see if it is low. -
Can the battery of the wireless earphones be replaced?
Answer: No. The lithium polymer battery in the earphones is irreplaceable. -
The wireless earphones got disconnected with the phone within 10 meters.
Solution: BT is wireless so that it is very sensitive to objects between the earphones and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance. -
Cannot hear audio playing when the earphones are connected to the computer or phone.
Solution: Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer. -
Can I operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
Answer: Some apps may not support being operated through the earphones due to their settings.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
FCC ID: XXXXX-XXX
www.miniso.com
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>