Ablerex CPSS ZEN Single Phase 4000-10000 VA Instructions

: September 21, 2024
: Ablerex

Table of Contents

CPSS ZEN Single Phase 4000-10000 VA
Specifications
Product Usage Instructions
Operating Modes
Components
Accessories
- FAQ
Q: What are the different operating modes of the CPSS ZEN
Q: What accessories are available for the CPSS ZEN system?
Q: What certifications does the CPSS ZEN system have?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

CPSS ZEN Single Phase 4000-10000 VA

“`html

Specifications

Model: CPSS ZEN
Compliance: EN 50171
Single-phase Capacity: 4000-10000 VA
Three-phase Capacity: 10-40 kVA

Product Usage Instructions

Operating Modes

Online Mode (VFI): The load is always powered
by the inverter.

ECO Mode: The load is powered by the bypass
during normal operation and by the inverter when there is no mains
or it is out of tolerance.

Emergency Mode (SE): The load is only powered
by the inverter when there is no mains or it is out of
tolerance.

Mixed Mode: One load is always powered by the
inverter, while the other load is only powered by the inverter when
there is no mains or it is out of tolerance. The three-phase
version requires the optional Mixed Mode Kit.

Components

The CPSS ZEN system consists of:

Static switch
Rectifier
Inverter
Battery
Emergency Load
Continuous Load

Accessories

The CPSS ZEN system offers various accessories including:

External Bypass Panels (MTBS-60, MTBS-120, MTBS-200,
Rack-BP_PDU-50)
Isolation Transformers (TRAFO06, TRAFO10, TRAFO20, TRAFO30,
TRAFO40)
Parallel Kit (PARRIT KR, PARCAB30, PARCAB80)
Mixed Mode Kit (OP4ZEN)

FAQ

Q: What are the different operating modes of the CPSS ZEN

system?

A: The CPSS ZEN system operates in Online Mode
(VFI), ECO Mode, Emergency Mode (SE), and Mixed Mode.

Q: What accessories are available for the CPSS ZEN system?

A: Accessories include External Bypass Panels,
Isolation Transformers, Parallel Kits, and Mixed Mode Kits.

Q: What certifications does the CPSS ZEN system have?

A: The CPSS ZEN system is fully EN 50171
compliant and certified by a third party.

“`

SINGLE AND THREE-PHASE CPSS
CPSS ZEN

EN 50171 compliant CPSS designed to ensure the highest degree of protection in the critical environments of all emergency system installations.
For everyone’s peace of mind: designers, retailers, installers and end users.

CPSS ZEN single-phase 4000-10000 VA

CPSS ZEN three-phase 10-40 kVA

Applications
· Emergency lighting · Fire alarm systems · Smoke extraction systems · Gas and smoke detection systems

· Security alarm systems · PAV Voice Systems · Lone Worker Systems

Three-phase CPSS ZEN 1020 kVA

Three-phase CPSS ZEN 3040 kVA

Single-phase CPSS ZEN 46 VA CPSS ZEN 810 VA

SINGLE AND THREE-PHASE CPSS
CPSS ZEN

· Fully EN 50171 compliant with third party test certificate, the ZEN CPSS is a real Central Power Supply System that meets all legal requirements for the protection of emergency and safety systems.
· Easy to install: smallest footprint among EN 50171 compliant products.
· Wide variety of audible and visual alarms including: battery polarity reversal, CPSS and battery charger short circuit, power failure, low battery, bypass transfer, CPSS fault.
· Cold start from the battery without mains power.
· Maximum efficiency (up to 98%) and flexibility thanks to the 4 operating modes.
· The single-phase version includes mixed, online and SE modes with separate outputs, while the three-phase version requires optional accessories.
· Dual input and internal manual bypass for simple, completely safe maintenance.
· High overload capacity: delivers up to 120% of the rated power indefinitely.
· Easy and fast connection guaranteed by the terminals, which have been enlarged in the single-phase version.
· Option of internal battery with housing for 40 9Ah batteries for three-phase 10 and 20 kVA models (with optional tray kit only), giving a compact solution for small-load applications.

· Protection against load-side short circuits and battery polarity reversal, without the risk blowing fuses during commissioning, even in the event of reversal.
· Shorter charging time and longer battery life thanks to high charge current with temperature compensation.
· Accurate calculated remaining uptime is shown on the display.
· Hot-swappable batteries: the batteries can be replaced while the CPSS is running.
· Greater flexibility offered by the internal charger that is easy to set from the display.
· Battery life of 10 years.
· Heat and fire resistant IP20 casing that is EN 60598-1 compliant.
· Easily upgradeable firmware.
· RS232, USB and EPO ports built-in, and slots for optional communication cards. Remote on/off available in the single-phase version.

Fully EN 50171 compliant with third party test certificate

Key options
· Cards: SNMP, RS485 ModBus and relay card with dry contacts · EN 50272-2 compliant battery cabinet

CPSS ZEN single-phase
· Additional battery charger for long runtimes

CPSS ZEN three-phase
· Parallel kit · Mixed mode kit

SINGLE AND THREE-PHASE CPSS
CPSS ZEN
Accessories
CPSS ZEN single-phase
COMMUNICATION CARDS for sending the CPSS status to a control computer DCE-C: Programmable card with dry contacts with dry contacts with client software included. SNMP ABL: Network card CY504B for sending data, controlling CPSS and receiving alarms via email with SNMP protocol. Client software is included. SNMP GEN P: 3-port Generex card (CS141SC) for controlling CPSS, and receiving alarms via SMS or/and email. Includes network interface for sending data with SNMP protocol, port for environmental monitoring sensor connection or RS232 adapter (ModBus or GPRS/GSM modem),and port connecting alarm contacts. One RCCMD client software is included. SNMP GEN: Network card (CS141BSC) for CPSS control, sending data, and reception of alarms via email, via SNMP protocol. One RCCMD client software license is included. RS485 CARD: Internal for data exchange via the R485 protocol.
EXTERNAL BYPASS to ensure power continuity to the load during maintenance MTBS-60: 60A bypass panel. MTBS-120: 120A bypass panel. MTBS-200: 200A bypass panel. Rack-BP_PDU-50: External manual bypass with additional 50A sockets (4 x 16A IEC and 8 x 10A IEC) or powered by CPSS.
ISOLATION TRANSFORMERS for protection against electric shocks and ensure power availability to sensitive equipment TRAFO06: Transformer for 6 kVA. TRAFO10: Transformer for 10 kVA.
CPSS ZEN three-phase
COMMUNICATION CARDS for sending the CPSS status to a control computer SNMP GEN: Generex network card (CS141BSC) for sending data with SNMP protocol for UPS control and reception of alarms via email. One RCCMD client software license included. TS-KR-SNMP-1: Network card for sending data with SMNP protocol for controlling the UPS and reception of alarms via sms or/and email and, with port to measure temperature and humidity. Client software included. TS-KR-EMD: Environmental monitoring sensor for SNMP card with temperature and humidity monitoring. TS-KR-485: Card for data exchange via the RS-485 protocol. TS-KR-DEC: 6 in 6 out programmable relay card with dry contacts for sending data to PLC, SCADA or AS400.
ISOLATION TRANSFORMERS for protection against electric shocks and ensure power availability to sensitive equipment TRAFO10: Transformer for 10 kVA. TRAFO20: Transformer for 20 kVA. TRAFO30: Transformer for 30 kVA. TRAFO40: Transformer for 40 kVA.
PARALLEL KIT to share the load among more than one CPSS to increase capacity and redundancy PARRIT KR: Parallel kit composed of card and 1.5 m cable. PARCAB30: 3 m parallel connection cable. PARCAB80: 8 m parallel connection cable.
MIXED MODE KIT: to have SA and SE with separate outputs MIXED. OP4ZEN: wall- mounted kit with contactor for mixed mode 40 kW (150A).

SINGLE AND THREE-PHASE CPSS
CPSS ZEN
Operating mode
Online mode (VFI) The load is always powered (SA) by the inverter.
AC Source

ECO mode The load is powered by the bypass during normal operation and by the inverter when there is no mains or it is out of tolerance.

AC Source

Emergency mode (SE)
The load is only powered by the inverter when there is no mains or it is out of tolerance.

AC Source

Mixed mode One load is always powered by the inverter, while the other load is only powered by the inverter when there is no mains or it is out of tolerance (SA and SE with separate outputs). The three-phase version required the optional Mixed mode kit.

AC Source

Static switch

Rectifier

Inverter

Battery

Static switch

Rectifier

Inverter

Battery

Static switch

Rectifier

Inverter