SALEX MMM-03 Magnetic Mounts Universal Cell Phone Holder Installation Guide

SALEX MMM-03 Magnetic Mounts Universal Cell Phone Holder

Install the Phone Holder

1. Choose a flat smooth surface on your car dashboard or another flat surface (in your home, office, garage, anywhere).
2. Clean the chosen area with the alcohol pad (included). Allow to fully dry before installing the magnetic phone car mount.
3. Peel the 3M adhesive covering on the base of the magnetic mount. Stick and press in place for 30 seconds to ensure that it is firmly attached.

Note:

1. Wait 1 hour to use Salex Magnetic Mount after installation.
2. In cold weather, less than 60°F/l S°C, install in a well-warmed car only.

Install the Metal Disk

Sales Metal Disks can be installed on the outside of your smart device case, inside the case or directly on the smart device.

1. Use the alcohol wipe to clean the surface on the back of the device or case and allow to fully dry.
2. Remove the adhesive covering from the magnetic disk.
3. Place the disk onto the cleaned area of the device or case. Wait 1 O minutes before using.

how to use

Sa lex Magnetic Mount is easy to use, no cradle or clips, simply hold your phone close to the magnetic base and it locks into place. Compatible with devices that have an 7 in or smaller display and weigh less than 11 oz

Disclaimer:

• SALEX is not responsible for any injury or harm caused by misuse of Magnetic Mount
• Do not use any hard-drive-based devices such as iPod classic, iPod video, and Zune MP3 players.
• Do not place near magnetically sensitive objects such as credit cards, pacemakers or computer hard drives.
• Do not use the attached device to watch videos or in any distracting manner while driving.
• Magnetic Holder is not a toy.
• Not intended for use by children under 8 years old.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>