Laney BCC-LOUDPEDAL-IMM 60 Watt Twin Channel Amp User Manual
- September 19, 2024
- Laney
Table of Contents
Laney BCC-LOUDPEDAL-IMM 60 Watt Twin Channel Amp
INTRODUCTION
The IRONHEART-LOUDPEDAL is designed to be the tone engine of a flexible pedal board setup with a feature set that replicates the acclaimed IRONHEART all- tube tonal range. Meticulously designed in our UK workshop to deliver real IRONHEART tone in an analog, pedal amp format. The IRONHEART-LOUDPEDAL is a two-channel, 60-watt amplifier featuring powerful EQ & dynamic gain switching, a captivating reverb, and a foot-switchable BOOST function. Developed in close collaboration with Martin Miller, whose ongoing involvement in refining the design has been instrumental, the IRONHEART-LOUDPEDAL ensures the delivery of exceptionally expressive and sonically lush IRONHEART tones in a conveniently pedalboard-friendly package no bigger than a double pedal!
The IRONHEART-LOUDPEDAL is an entire rig solution in a portable pedal. Clever design means it can be used in various workflows. You can place the IRONHEART- LOUDPEDAL in front of your existing amplifier and use it as a high-quality twin-channel clean boost to a full-on distortion pedal or plug it directly into a passive cabinet on stage or in a rehearsal room.
For silent stage and recording applications, the IRONHEART-LOUDPEDAL is equipped with the amazing LA·IR – Laney Advance Impulse Response technology, using 56bit FIR filters to provide high-quality cabinet emulations, allowing you to select from 2 onboard IRs, EQ them to your requirements and plug directly into the PA or IEM rig without losing any of the nuance and character of a great mic’d cabinet. You can even load your own favorite IRs into the IRONHEART-LOUDPEDAL pedal with the free LA·IR app via the USB-C connection. The USB-C connection also features audio out which means you can connect it directly into your DAW. The IRONHEART-LOUDPEDAL is a true IRONHEART gain monster – flat on the floor!
FEATURES
- 60W RMS Amplifier into 8 – 16Ω.
- Two Independent Channels with footswitch control designed from the ground up to replicate the tone AND feel of the IRONHEART Tube Series.
- Clean Channel with Gain, Volume, and Gain Character Switch (Symmetric or Asymmetric).
- Drive Channel with Gain, Volume, and switchable Bright, Natural, and Dark voicing.
- Built-in footswitchable Pre-Boost with level control.
- 3 Band Passive Tone Stack as well as overall Tone Control.
- Footswitchable Digital Reverb with control.
- Preloaded with two High-Quality LA·IR Digital IRs handcrafted by Martin Miller.
- Emulated balanced XLR Out with IR select and ground lift switches.
- Class Compliant Audio streaming via USB C socket @48kHz (Emulated and unemulated main out twin stream).
- LA∙IR App allows loading your custom IRs and changing EQ and firmware updates.
- MIDI In and Thru, with full-size MIDI connectors.
- 6.3mm Transformer Isolated FX Loop (FX Send doubles as an unemulated line out).
- 3.5mm Stereo Aux In and 3.5mm Stereo Headphone Output (Follows Cabinet Emulation).
INCLUDED IN THE BOX
- BCC-LOUDEDPAL-IMM.
- Universal 100-240V~ power supply and mains cord.
- USB C to C Cable (1m).
- USB A to C Adaptor.
CONTROLS
TOP VIEW
Thanks to its dual-channel setup, the BCC-LOUDPEDAL-IMM allows you to easily switch between two tone sets, via footswitch or MIDI. Each channel has its own Gain, Volume, and Tone control with switchable BOOST and REVERB, again via footswitch or MIDI.
CHANNEL 1 SETTINGS
- VOLUME control for channel 1, once the gain is set, use this to control the overall level of the channel. Will mute the channel at 0.
- GAIN control independently increases the preamp gain of channel 1. Adds more distortion to your signal.
- GAIN CHARACTER SWITCH allows more refined control of the distortion characteristic of the channel. Changing the GCS mode will affect how the drive stage reacts and responds. Each setting has a sweet spot where the effect is most noticeable. This tends to be at mid-higher gain levels.
- CLEAN – soft clipping is applied to the drive stage giving the least amount of compression and allowing for a more open tone
- SYM – Symmetrical clipping is applied giving a more aggressive distortion for a high gain, compressed sound.
- AYSM – Asymmetrical clipping is applied giving more distortion whilst retaining some clarity and dynamics.
CHANNEL 2 SETTINGS
- VOLUME control for channel 2, once the gain is set, use this to control the overall level of the channel. Will mute the channel at 0.
- GAIN control for channel 2. A higher gain than channel 1, this control will distort much easier as you increase it.
- TONE SWITCH allows for control over the frequency response of channel 2.
- BRIGHT – extends the high frequencies and slightly dulls the low-end.
- DARK – boosts the low-end frequencies adding some warmth to the tone whilst reducing the power of the high frequencies.
- OFF – Middle setting gives no change
BOOST CONTROL
The switchable and variable BOOST control is an additional gain/drive setting
to increase the input signal, just like placing a boost pedal in the signal
path. This works on both channels simultaneously, with an LED above the
control knob to show that it’s active.
-
TONE
The TONE control works similarly to the Tone control you probably have on your guitar except that it uniquely works at the other end of the amplification chain. It cannot only control the overall top-end response but also reduce upper-end harmonics on the output stage and preamplifier overdrive sounds. This will give you bright cutting sounds at high settings and smooth rounded sounds at lower settings. (Midway (0) is a good starting point). -
REVERB
Our built-in studio quality spring line reverb effect is based on our award- winning Secret Path pedal. Turn the knob clockwise to increase the strength of the effect. The adjacent LED illuminates when the Reverb is active. At 0, only the dry signal will be heard. -
EQ CONTROLS
The built-in passive EQ stack allows you to fine-tune your sound. As a starting point, noon is the neutral setting for these and will provide you with a good starting point for further tweaking. -
BASS – Adjusts the strength of the low-end response of your output, for a deeper sound when turned clockwise.
-
MIDDLE – Adjusts the strength of the mid-range response of your output, which when turned clockwise gives a fuller sound.
-
TREBLE – Adjusts the strength of the top-end response of your output. Turning clockwise will boost the brighter, higher notes.
-
FOOTSWITCHES
-
REVERB – toggle on/off the reverb control. Reverb status is indicated by the LED to the upper right of the reverb control knob.
-
CHANNEL 1/2 – Choose between the two channels using this switch. The active channel is indicated by the LED to the right of the Gain1/2 controls.
-
BOOST – toggle the boost on/off. Boost status is indicated by the LED to the upper right of the boost control knob.
REARVIEW
POWER
The Power inlet and switch. This switch will turn on and off the pedal. We
suggest turning the pedal off when plugging in the power supply. The BCC-
LOUDPEDAL-IMM has an included power supply that runs universally at 100-240V~.
Warning: Only connect the provided 24V 2.5A power supply to the DC inlet.
USB
Use the included Type-C USB cable to connect to a computer and access the
LA∙IR app to modify the pedal’s EQ, gain, and IRs. Also works as an L/R
channel audio output for both emulated and unemulated audio.
HEADPHONE OUT
3.5mm jack to connect your headphones for silent practice as the level feed to
the LOUDSPEAKER output is muted. Your selected tone will play directly into
your headphones. Adjust the level using the channel volume controls. The
cabinet emulation also applies to the headphones out, following whatever the
switch is set to.
AUX IN
3.5mm jack to plug in any audio-playing device to add a backing mix to your
guitar track. This is added after the FX loop.
LA∙IR EMULATED DI OUT
A balanced XLR output to your external device such as a PA or audio interface.
Set your desired tone on the pedal first then set the parameters on your
chosen interface to get the sound you want. Decide on the emulation you want
to be applied with the LA∙IR switch, choosing between two IRs recorded and
produced by Martin Miller himself.
- OFF – No emulation applied to DI out or headphones
- A – By default, apply Martin Miller’s Ultimate Lead IR to the DI out. This can be swapped using the LA∙IR desktop app. See the USING THE APP section for more information.
- B – By default, apply Martin Miller’s Blended Cabinet IR to the DI out. This can be swapped using the LA∙IR desktop app. See the USING THE APP section for more information.
- GROUND LINK – Disconnects the ground from pin 1 of the DI output ONLY. Useful to attempt to reduce ground loop hum when connected.
MIDI
Connect to a MIDI foot controller to allow for remote switching of REVERB,
CHANNEL Select and BOOST using the MIDI IN socket on the BCC-LOUDPEDAL-IMM or
switch external devices with the REVERB, CHANNEL, and BOOST footswitches using
the MIDI THRU/OUT socket.
RIGHT SIDE VIEW
INPUT
6.3mm input jack. Plug your signal input in here, either directly from your
guitar or from your pedalboard setup.
LEFT SIDE VIEW
FX SEND / LINE OUT (TRANSFORMER ISOLATED)
6.3mm output jack. This is a multi-purpose output that can be used either as a
line-level output or as a traditional effect sent to your other gear. As this
is transformer isolated, it is also possible to use this output directly into
the front end of another amplifier, effectively making the BCC-LOUDPEDALIMM a
high-quality distortion/boost pedal with no requirement to use the loudspeaker
output.
FX RETURN
6.3mm jack to connect the output of your FX loop gear back to the BCC-
LOUDPEDAL-IMM. This is an insert-type loop; all the signal is sent through
your external gear. Inserting a jack here will break the signal path.
LOUDSPEAKER
6.3mm jack to output your signal to your speaker cabinet. Use this output when
using the BCCLOUDPEDAL-IMM as an amplifier directly into a passive 8-16Ω
speaker cabinet. Do not connect this output to any other gear such as an
effect unit or another amplifier input.
NOTE: Minimum total impedance for the connected speaker cabinet is 8Ω
BOTTOM VIEW
The product serial number is attached here along with other information.
HOW TO CONNECT THE BCC-LOUDPEDAL-IMM
The BCC-LOUDPEDAL-IMM can function just like your regular head, plugged
directly into a passive speaker cabinet. It’s loud.
The DI can be used as a balanced feed for additional active cabinets such as our acclaimed LFR series or your house PA.
AS AN AMPLIFIER WITH FX LOOP
You can also connect your pedalboard to the BCCLOUDPEDAL-IMM’s FX loop and use
the pedal in place of a regular amplifier. Output this to a minimum 80hm
passive speaker cabinet and you have your very own lightweight, portable
amplifier.
AS A PEDAL IN FRONT OF AN AMPLIFIER
The BCC-LOUDPEDAL-IMM can be connected in series with your regular pedal setup
to act as a dual-channel gain pedal with an additional boost. Connect the FX
send socket to your amp head.
AS A SILENT PRACTICE RIG USING HEADPHONES OUTPUT
The BCC-LOUDPEDAL-IMM includes a high-quality headphone output for silent
practice. It is optimized for high-impedance headphones such as Common 33,
though any may be used. To play along with a backing track, the BCC-LOUDPEDAL-
IMM comes with an AUX-in connection. This is a stereo 3.5mm mini jack to
connect to the audio output of any device with an aux or headphone output.
DIRECTLY INTO A PA OR RECORDING DEVICE WITH XLR D.I. OUTPUT
The BCC-LOUDPEDAL-IMM has a high-quality speaker-emulated DI output that can be connected to any balanced/unbalanced line-level input device such as a PA or audio interface to DAW.
DIRECTLY INTO YOUR COMPUTER VIA USB
The BCC-LOUDPEDAL-IMM has a high-quality USB audio feed that can be plugged
directly into a computer with the provided USB-C cable (USB-A adaptor also
included). Once the pedal has been powered on and is connected, your PC will
then pop up that the pedal is connected and will notify you when the device is
ready.
You can now freely use the pedal with the LA IR app once it has been installed. Simply launch the app with the pedal connected and it’s ready to go. See THE LA•IR APP section for more information. In addition, there is dual-channel USB audio. The left channel will provide you with the emulated audio, following whatever the LAIR emulation switch is set to. The right channel will provide you with the unemulated audio, bypassing the inbuilt cabinet emulation.
MIDI
Connect to a MIDI foot controller to allow for remote switching of REVERB,
CHANNEL Select, and BOOST using the MIDI IN socket on the BCC-LOUDPEDAL-IMM or
switch external devices with the REVERB, CHANNEL, and BOOST footswitches using
the MIDI THRU/OUT socket. The BCC- LOUDPEDAL-IMM receives MIDI messages on
CH7. Please make sure your external MIDI foot controller is configured to send
MIDI messages on CH7.
MIDI MASSAGE TABLE
THE LAIR APP
Through the purchase of your BCC LOUDPEDAL-IMM, you also have access to
Laney’s very own LA∙IR app. The app allows you to expand the sound of your
LOUDPEDAL-IMM even further by switching out the loaded IRs with your own as
well as offering an 8-band parametric EQ for each cab. All this can be done on
the fly during practice, so you can hear the change in your sound as you go.
The app runs on Windows 10/11 and Mac OS.
DOWNLOAD & INSTALLATION
The download page for the app will be available via a QR code supplied in the
packaging of your pedal, or via the Laney website. To receive your software
first register your product via the Laney warranty page. On submission of your
registration, you will be provided with a download link for the installer –
MAC or WINDOWS. A link to download the software will also be forwarded to your
email. Once downloaded, run the Setup-LAIR_x64.exe found in the downloads
folder in File Explorer. Follow the instructions of the installer, accept the
EULA choose a suitable location for the installation, then press Install to
complete.
Once the .dmg file has been downloaded, drag this into the applications folder to complete the installation. Launch the LA∙IR app from this folder location from now on. The app will automatically prompt you for an update upon startup should a new version be released. We recommend accepting any updates as they may include new features or bug fixes. Similarly, with your BCC-LOUDPEDAL-IMM connected and powered on, you will be notified if any firmware updates are available for the pedal. Again we recommend allowing any updates that come through to improve your user experience. Minor updates may not show as a pop- up so be sure to check the update panel from time to time, where these can be accessed.
USING THE APP CONNECTING THE LOUDPEDAL-MM
Connecting the BCC-LOUDPEDAL-IMM is easily done via the USB-C cable provided
with the pedal in the box. Plug one end into the USB-C socket on the pedal and
the other into your computer that has the app downloaded. Can be plugged into
a computer with either USB-C or A sockets – simply use the USB-C to A adaptor
provided.
CHANGING THE IRs
Aside from the two preloaded IRs on the pedal, the app can be used to swap
these out for any of your IRs. To load your own User IR, click the drop-down
box under either cab A and select “Import IR” – only WAV files can be used.
The app will convert your IR into the Lair file format that the pedal can use.
Don’t worry, your original WAV file won’t be deleted! Two of Laney’s own 1×12
cab and 4×12 cab IRs are also included with the app.
It is possible to edit the name of User IRs as well as delete them from the
pedal and the app. To do so, right-click on any IRs under the “User” section
and press “EDIT” or “DELETE”. The default System IRs cannot be deleted.
WARNING: Deleting a User IR is permanent and cannot be reversed. The only
way to get the IR back is to re-import the original .wav file
CHANGING THE GAIN
The gain of each cab IR can also be changed individually via the radial
control on the right-hand side, should they be too loud/quiet. This gain will
be saved to the IRs. The lair file so will remain when using the pedal without
the app. Simply drag the slider, use your mouse scroll wheel, or double-click
and manually type the gain you want (in dB). Ranges from -40dB to +6 dB.
CHANGING THE EQ
The LAIR app also comes with an 8-band parametric EQ for each cab. 5 different
filters are available, paired with easy-to-use controls allowing you to change
the gain, frequency, and Q factor depending on the filter applied.
WARNING: Any EO changes will be permanently lost if the ann is
closed/disconnected without saving!
-
EQ TOGGLE
Turn on and off the EQ for the whole pedal (Cab A and B), which can be useful for dry/wet testing. -
A+B LINK
Link the Cab A and Cab B EQs to be the same. This will follow the EQ for Cab A when pressed. Unlinking will revert Cab B to its previous state. -
DI CAB SELECT
Choose which cab you want to edit the EQ for. The selected cab is highlighted in black. -
BAND CONTROLS
The main controls for each band are found here. Turn the band on and off, and change the filter you want the band to apply from the drop-down menu. Choose from peaking, high/low pass, and high/low shelf. Additionally, 3 radial sliders are available to change the gain, center frequency, and Q factor of the filter. The value of each slider can be changed by dragging, using your mouse scroll wheel, or double-clicking the number and manually typing in your desired value. Depending on the filter selected, 1 or multiple of these controls will be available.
FREQUENCY RESPONSE GRAPH
This graph displays the resultant frequency response of all the EQ bands. View
your changes live to easily see how your sound will be affected. Additionally,
each band is color-coded so you can see which filter is doing what.
BAND NODE
The graph also shows a numbered node representing each band currently active.
Showing the current center frequency and gain, these are draggable to allow
for quick and easy changes. For more precise changes we recommend using the
band controls (4).
SAVE BUTTON
Press this to save any unsaved changes to the EQs (both A and B), so they can
be stored on the pedal and used without the app. Should any unsaved changes be
present, this will be visible to alert you that closing the app (or
disconnecting the pedal) will lose these changes.
SETTINGS PANEL
LANGUAGE
Change the language of the LA•IR app to your preferred language.
RESET DEVICE
This will reset all EQ and gain changes as well as return the IRs to the
default Martin Miller ones. This cannot be undone and all changes from the
default will be lost.
ERASING THE USER IRS
Delete all user IRs from the app and pedal. These are impossible to get back
unless you have the original WAV file to import again so be sure you want to
do this. A pop-up warning will show before deleting.
OPEN USER IR FOLDER
Open the folder where all your imported Lair IRs are stored.
EXAMPLE SETTINGS
The best way to get started with your BCC-LOUDPEDAL-IMM is to experiment with
the controls to find your favorite sounds. However, for a head start, here are
a few example tone settings to try out:
MARTIN MILLER’S TONE
Get the tone used by Martin Miller himself when he uses the LOUDPEDAL-IMM.
SPECIFICATIONS
DIMENSIONS (in mm)
SAFETY AND WARNINGS
To take full advantage of your new product and enjoy long and trouble-free
performance, please read this owner’s manual carefully, and keep it in a safe
place for future reference.
- Unpacking: On unpacking your product please check carefully for any signs of damage that may have occurred whilst in transit from the Laney factory to your dealer. In the unlikely event that there has been damage, please re-pack your unit in its original carton and consult your dealer. We strongly advise you to keep your original transit carton, since in the unlikely event that your unit should develop a fault, you will be able to return it to your dealer for rectification securely packed.
- Amplifier Connection: To avoid damage, Generally it is advisable to establish and follow a pattern for turning on and off your system. With all system parts connected, turn on source equipment, mixers, effects processors, etc, BEFORE turning on your amplifier. Many products have large transient surges at turn on and off which can cause damage to your speakers. By turning on your amplifier LAST make sure its level control is set to a minimum, any transients from other equipment should not reach your loudspeakers. Wait till all system parts have stabilized, usually a couple of seconds. Similarly when turning off your system always turn down the level controls on your amplifier and then turn off its power before turning off other equipment.
- Cables: Never use shielded or microphone cables for any speaker connections as this will not be substantial enough to handle the amplifier load and could cause damage to your complete system. Use good quality shielded cables everywhere else.
- Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any of the ventilation openings. Install by the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- An apparatus with Class I construction shall be connected to a main socket outlet with a protective connection. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding type the plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.
- Only use attachments/accessories provided by the manufacturer.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- The mains plug or an appliance coupler is used as the disconnect device and shall remain readily operable. The user should allow easy access to any mains plug, mains coupler, and mains switch used in conjunction with this unit thus making it readily operable. Unplug this apparatus during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.
- If this product is to be mounted in an equipment rack, rear support should be provided.
- Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:
- The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ colored green or colored green and yellow.
- The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black.
- The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.
- This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus.
- Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: According to OSHA, any exposure over the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system to prevent permanent hearing loss if exposure is more than the limits set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
- If your appliance features a tilting mechanism or a kickback-style cabinet, please use this design feature with caution. Due to the ease with which the amplifier can be moved between straight and tilted back positions, only use the amplifier on a level, stable surface. DO NOT operate the amplifier on a desk, table, shelf, or otherwise unsuitable non-stable platform.
- Symbols & nomenclature used on the product and in the product manuals, are intended to alert the operator to areas where extra caution may be necessary, these are as follows:
CAUTION
Intended to alert the user to the presence of uninsulated ‘Dangerous Voltage’
within the product’s enclosure that may be sufficient to constitute a risk of
electrical shock to persons. etre intensite suffisant pour constituer un
risque de cho ele regension non isolee dangereuse pouvant Este simbolo tiene
el proposito de alertar al usuario de la presencia de (voltaje) peligroso que
no tiene risode corienta de la caja del producto que puede tener una magnitud
suficiente como para constituir Die ves Suricheller Starke side, mr einen
elektrischen Schla Serursachen zu kohale des Gehauses warnen,
ATTENTION
Intended to alert the user of the presence of important operating and
maintenance (Servicing) instructions in the literature accompanying the
product. Risk of electrical shock – DO NOT OPEN. To reduce the risk of
electrical shock, do not remove the cover. No
user-serviceable parts inside. Refer servicing to qualified personnel. un
personnel qualified.
WARNING
To prevent electrical shock or fire hazards, do not expose this appliance to
rain or moisture. Before using this appliance please read the operating
instructions for further warnings.
FCC STATEMENT
This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, that may cause undesired
operation.
Warning: Changes or modifications to the equipment not approved by Laney can void the user’s authority to use the equipment. Noper hi of quire has These tied ad fusing to ple it the limit fe protect dial device, pursuant installation. If this equipment does cause harmful interference to radio or television reception, it can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment red. Cons Come de the oin experienced valet ov shout different from that to Mark 193l6 CeC) Low 0 trade - MC 20149 EU, Bo 5(201 1/65 )Er 2002/125/ E,
SIMPLIFIED EU DECLARATION OF CONFORMITY
20153/20, 251/59/E, 2002125rE hut he olio declaration of conformity is Daitive
at the following internet address:
http://support.laney.co.uk/approvals
Regulations 20d sign for Energy-Related Products and Energy Information, (Amendment) (EU Exit) To reduce environmental damage, at the end of its useful life, this product must not be disposed of delicate in you commend on the WE i so tie a and i crone Eat pre in receives. STEELPARK ROAD, COOMBSWOOD BUSINESS PARK WEST, HALESOWEN, B62 8HD. UK FOR THE LATEST INFORMATION PLEASE VISIT WWW.LANEY.CO.UK IN THE INTEREST OF CONTINUED DEVELOPMENT, LANEY RESERVES THE RIGHT TO AMEND PRODUCT SPECIFICATIONS WITHOUT PRIOR NOTIFICATION.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>