form style 5862320 Soft Cushioned Foam Toilet Seat Instruction Manual

: September 19, 2024
: form style

Table of Contents

form style 5862320 Soft Cushioned Foam Toilet Seat
Product Information
FAQ
INTRODUCTION
INTENDED USE
IMPORTANT SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
BEFORE FIRST USE
SCOPE OF DELIVERY AND PRODUCT OVERVIE
INSTALLATION
USE
CLEANING
MAINTENANCE
TROUBLESHOOTING
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

form style 5862320 Soft Cushioned Foam Toilet Seat

Specifications:

Material: MDF

Product Information

Introduction:

This instruction manual ensures the safe and efficient use of the product. Prior to installing and operating the product, read it carefully and familiarize yourself with this manual. Safety instructions must be followed to ensure the safe operation of the product. Keep this instruction manual for future use and reference. Please note that this manual is subject to updates as technological advancements occur.

Preparation:

Tools required (not supplied):

Cross-head screwdriver
Mallet

Important Safety Instructions:

If you pass this product to a third party, ensure these instructions are included. Potential safety hazards include suffocation.

Before First Use:

Remove all toilet deodorizers that come into contact with plastic parts immediately.

Installation:

Remove the hinge clips from the toilet seat.
Install the toilet seat into the hinge clips.
Lower the toilet seat ring and cover.
Insert screws into the pegs and tighten them slightly.

Usage:

To use the soft-close feature, gently lower the toilet seat and cover for automatic closing.

Cleaning:

To clean the toilet seat, use mild soap and water. Avoid abrasive cleaners.

Maintenance:

No specific maintenance instructions provided in the manual.

Troubleshooting:

If balls and springs fall out of the hinge clips, follow the installation steps again to reassemble.

Disposal:

Refer to packaging for disposal instructions.

FAQ

Problem: The soft-close feature is not working properly.

Solution: Check if any obstructions are preventing the seat from closing softly. Clean the hinges and ensure proper installation.

ART

5862320, 6270394, 10119258, 10119259, 6648131, 6648132, 6648133, 6680486, 6648134, 6648135, 6660010, 6680487, 10179680, 10179711, 10214134, 6648302, 6648303, 6648304, 6648305, 6648309, 6648306, 6648307, 6648308, 10246136, 10246137, 10246138, 10248911, 10248900, 10248897, 10248899, 10248898, 10248030, 10248891, 10248892, 10248893, 10248894, 10248895, 10248896, 10321151

INTRODUCTION

This instruction manual ensures the safe and efficient use of the product. Prior to installing and operating the product, read it carefully and familiarize yourself with this manual. Safety instructions must be followed to ensure the safe operation of the product. Keep this instruction manual for future use and reference. Please note that this manual is subject to updates as technological advancements occur.

INTENDED USE

This product is intended for installation on a compatible toilet bowl with top-fixing holes

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

This product must be assembled by an adult.
Keep children and pets away while installing the product.
Do not climb on top of the toilet lid or use the product as a step.
Do not lean back against the toilet lid.
Do not use this product if any parts are missing, damaged or worn.
Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
Do not use power tools to assemble the product. Power tools may strip or damage parts.
Clean the toilet bowl and the surrounding area to maintain hygiene before installation.
Do not use excessive force to open or close the toilet seat ring and toilet lid.
Do not use toilet deodoriser on plastic parts. Immediately wipe any toilet deodoriser that makes contact with plastic parts.
Do not expose the product to direct sunlight.
Do not place any sources of heat near the product.

EXPLANATION OF SIGNAL WORDS

The following symbols and signal words are used in this manual, on the product and/or on the packaging.

DANGER!
The signal word indicates a hazard with a high level of risk which, if not avoided, could result in death or result in serious injury.
WARNING!
The signal word denotes a hazard with a medium degree of risk which, if not avoided, can result in death or a can result in serious injury.
CAUTION!
The signal word indicates a hazard with a low level of risk, which if not avoided, is a minor one or moderate injury.
NOTICE
This signal word indicates additional useful tips and information.

TECHNICAL SPECIFICATIONS

Material: MDF

PREPARATION

Tools required (not supplied)

BEFORE FIRST USE

WARNING!

Keep any packaging materials away from children and pets. These materials are a potential source of danger, e.g. suffocation.

CAUTION!

Be careful when opening the packaging so as not to damage the product. Avoid using knives or scissors.

Take the product out of the packaging.
Remove the packaging material and all plastic/protective films.
Check whether the delivery is complete (see chapter SCOPE OF DELIVERY AND PRODUCT OVERVIEW).
Check whether the product or the individual parts show any damage. If this is the case, do not use the product. Contact the customer service department.

SCOPE OF DELIVERY AND PRODUCT OVERVIE

No. Description

1 Toilet lid
2 Toilet seat ring
3 Hinge cover (x 2)
4 Hinge brackets (x 2)
5 Bolt (ø6 x 48 mm) (x 2)
6 Bracket (x 2)
7 Rubber gasket (x 2)
8 Rubber washer (x 2)
9 Spigot (x 2)
10 Hex key (not shown)

Note: The shape and dimensions of the toilet seat may differ depending on the model.

INSTALLATION

NOTICE

The hinge brackets (4) contain balls and springs held in place by the grub screws. If the grub screws are removed, the balls and springs may fall out.

Remove the existing toilet seat and fix parts.
Clean the toilet bowl and installation area.
Partially loosen the grub screws from the hinge brackets (4) of the new toilet seat with the hex key (10) (Fig. 1). Do not remove the grub screws
Pull the hinge brackets (4) from the toilet seat (Fig. 2).
Insert the spigots (9) into the fixing holes (Fig. 3).
Place the rubber gaskets (7), rubber washers (8) and hinge brackets (4) on top of the fixing holes (Fig. 4). Place and align the brackets (6) on top of the hinge brackets (4).
Insert the bolts (5) into the spigots (9) and tighten slightly (Fig. 5). Do not tighten them completely.
Place the toilet seat into the hinge brackets (4). Fold the toilet lid (1) and toilet seat ring (2) down (Fig. 6).
Adjust the toilet seat and mounting parts as necessary to fit the toilet bowl (Fig. 7).
Remove the toilet seat. Tighten the bolts (5) completely to secure the mounting parts in place (Fig. 8).
Fit the hinge covers (3) on top of the hinge brackets (4) (Fig. 9). Do not press the hinge covers (3) down completely.
Refit the toilet seat through the hinge covers (3) (Fig. 10). Do not press the hinge covers (3) down completely.
Tighten the grub screws of the hinge brackets (4) with the hex key (10) to secure the toilet seat in place (Fig. 11).
Press the hinge covers (3) down completely.
Check that the toilet seat is securely fastened by opening the toilet lid (1) to a maximum angle of 110° (Fig. 12).
Release the toilet lid (1) after lowering it slightly (Fig. 13). If it lowers automatically, it is properly installed.

USE

Using the soft-close mechanism

CAUTION

RISK OF DAMAGE!

Improper handling may cause damage to the product. Do not force the toilet lid (1) to close to prevent damaging the soft-close mechanism.

Open the toilet lid (1) to a maximum angle of 110° (Fig. 12).
Release the toilet lid (1) after lowering it slightly (Fig. 13). The toilet lid (1) closes automatically.

CLEANING

Cleaning the toilet seat

CAUTION!

Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These could damage the surfaces of the toilet seat.

To clean the product, apply a mild cleaner suitable for plastic. Wipe with a soft, slightly damp cloth. Wipe with a soft, dry cloth to dry the product.
Remove the toilet seat to clean around the fixing holes at the rear of the toilet bowl.
Do not use bleach or cleaners containing bleach.

MAINTENANCE

Check parts and components regularly to make sure all bolts and screws are tightened.

TROUBLESHOOTING

DISPOSAL

Dispose of the product according to local regulations. Contact local waste management for proper disposal or recycling.

Packaging

Children must not play with plastic bags and packaging material, due to the risk of injury and suffocation. Store such material safely or dispose of it in an environmentally friendly way.