Machine B09PZW5HG7 Designer Porcelain Leaves Pendant Light Installation Guide

B09PZW5HG7 Designer Porcelain Leaves Pendant Light

“`html

Product Information

Specifications:

• Model: [Insert Model Number]
• Light Source: G9 bulbs (8 included)
• Accessories: A1; B20; C16; D20; E1; F1; G(50mm)*2
• Installation Time: Approximately 50 minutes
• Installation Difficulty: 1 (requires an electric drill)

Product Usage Instructions

Step 1: Prepare for Installation

1. Take out the hanging plate inside lamp A and check all
accessories.

2. Mark the hole distance on the ceiling and drill holes using
an electric drill.

Step 2: Electrical Connection

1. Connect the zero line (N), fire line (L), and ground line to
the terminal (F).

2. Connect the wires to the home power supply, ensuring correct
polarity.

Step 3: Adjust and Secure Lamp

1. Adjust the height of the wire rope using (1) and secure the
lamp body to the hanging plate with the nut at (2).

Step 4: Light Source Installation and Testing

1. Install the light source (F) and test the light to ensure
proper functionality.

Step 5: Final Touches

1. Rotate and install the decorative flowers (B, C, D)
clockwise.

2. Install the leaves into the branches of the lamp stand,
adjusting their positions as desired.

FAQ

Q: How do I adjust the height of the wire rope?

A: Use the adjustment mechanism labeled as (1) to change the
height as needed.

Q: Can I use a different type of bulb with this lamp?

A: It is recommended to use G9 bulbs as specified for this
product for optimal performance.

“`

Picture 1

Installation Guide

Picture 2

Check products and accessories: A1; B20; C16; D20; E: Step 1: Take out the hanging plate inside the lamp A attached light source( G9) 8; F1; G(50mm)*2; Installation time: to the ceiling to make the hole distance mark, drill the hole 50min. Number of installations: 1. Installation difficulty: 1 with an electric drill, and drive the expansion screws ( G ).

Picture 3

Picture 4

Step 2: Connect the zero line (N), fire line(L), and ground line to the terminal ( F ), and then connect them to the home
power supply (pay attention to distinct the zero line and fire line).

Step 3: Press ( 1 ) to adjust the height of the wire rope of the lamp, and then secure the lamp body to the hanging plate
with the nut at ( 2 ).

Picture 5

Picture 6

Step 4: Install light source ( F ) and test the light, if no problem can proceed to the next step.

Step 5: Rotate the decorative flower B C D clockwise and install the leaves into the branches of the lamp stand (the
position can be adjusted at will)

Picture 7

Complete the installation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>