iFi Audio IFIMIDSDF micro iDSD Finale User Guide
- June 12, 2024
- iFi Audio
Table of Contents
iFi Audio IFIMIDSDF micro iDSD Finale
Product Information
- S-BAL 4.4mm output
- UnBAL 6.3mm output
- Power Mode
- Quick Start
- Audio Format LED (kHz)
- Analogue Volume Control
- ON/OFF
- 3.5mm S/PDIF Coaxial/Optical input
- RCA analogue output
- Digital Filter
- USB-A data input
- iEMatch switch
- USB-C (5V) charging input
- Battery status LED
Product Usage Instructions
- Connect the product to a power supply using a 5V power source.
- Turn ON the product and use the volume control to adjust the audio output.
- Connect your headphones to the appropriate output: UnBAL 6.3mm or S-BAL 4.4mm.
- If using analogue output, connect it to your audio system using RCA cables.
- For input, use the 3.5mm S/PDIF Coaxial/Optical input or USB 3.0 Type-A input.
- The Audio Format & kHz LED will indicate the audio format and sample rate.
- Green LED indicates PCM audio at 44/48/88/96kHz.
- Yellow LED indicates PCM audio at 176/192/352/384kHz.
- White LED indicates DSD audio at 768kHz.
- Cyan LED indicates DSD audio at 64/128.
- Blue LED indicates DSD audio at 256.
- Red LED indicates DSD audio at 512.
- Magenta LED indicates MQA audio.
- Use the Power Mode, Digital Filter, and iEMatch switch to customize the sound.
- Refer to the provided QR code to access a Set-Up video for further instructions.
Quick Start
- **Connect to power supply (5V only)
**
- **Input
**
- **Headphones output
**
- **Analogue output
**
- **Audio Format & kHz LED
**
- **Power Mode / Digital Filter / iEMatch switch
**
Documents / Resources
| iFi
Audio IFIMIDSDF micro iDSD
Finale
[pdf] User Guide
IFIMIDSDF, 0303020, IFIMIDSDF micro iDSD Finale, micro iDSD Finale, iDSD
Finale
---|---
Read User Manual Online (PDF format)
Loading......