ABYSS GAMING AB226501 Plus Bronze User Manual
- September 19, 2024
- ABYSS GAMING
Table of Contents
ABYSS GAMING AB226501 Plus Bronze
Specifications:
- Brand: AB226501
- Model: AB226501 (Black)
- Power Output: 750W
- Connectors:
- Main Power Connector (24 pin): 1
- ATX 12 V Connector (4 + 4 pin): 1
- PCI-E Connector (6 + 2 pin): 2
- SATA Connector (5 pin): 8
- Peripheral Connector (4 pins): 2
Product Usage Instructions
Installation Steps:
- Make sure that your system is turned off and unplugged. Disconnect the AC power cord from your old power supply.
- Open your computer case; Please refer to the directions in your case manual.
- Install the PSU into the case with the four screws provided.
- If your motherboard requires a 24-pin Main Power connector:
- Connect the 20+4 pin Main Power connector to the motherboard.
- If your motherboard only requires a 20-pin Main Power connector:
- Detach the 4-pin connector from the 20+4-pin Main Power connector and connect only the 20-pin connector to the motherboard.
- If your motherboard requires a 4-pin ATX 12V (CPU) connector:
- Detach a 4-pin connector from the 4+4-pin ATX 12V connector and connect it to the motherboard.
- Connect other peripheral power connectors to devices such as hard drives, optical drives, etc.
- If your graphic card requires a PCI-E power connector:
- Connect the corresponding PCI-E connector as instructed by your graphic card’s user manual.
- Note: The power supply utilizes a unique 6+2 pin PCI-E connector that can be effectively used as a single Spin or 6-pin PCI-E connector. To use it as a 6-pin PCI-E connector, detach the 2-pin connector from the 6+2 pin connector.
- Close your computer case and connect the AC power cord to the power supply AC inlet.
Output Specification:
- P/N: AB226501 (Black)
- DC Output: 750W
FAQ:
What should I do if my system does not power on after installing the power
supply?
If your system does not power on after installing the power supply, double-
check all connections to ensure they are secure. Verify that the power supply
switch is turned on. If the issue persists, consult with a professional for
further assistance.
Warnings and Caution
- Do not unplug the AC power cord when the power supply is in use. Doing so may cause damage to your components.
- Do not place the power supply in a high humidity and/or temperature environment.
- High voltages exist in the power supply. Do not open the power supply case unless you are an authorized service technician or electrician. Doing so will void the warranty.
- PSU should be powered by the source indicated on the rating label.
- All warranties and guarantees will be voided if failure to comply with any of the warnings and cautions covered in this manual.
Components Check
- Power supply unit
- User manual
- AC power cord
- Mounting screw
- Cable straps
Power Connector Introduction
Installation Steps
Note:
Make sure that your system is turned off and unplugged. Disconnect the AC
power cord from your old power supply.
- Open your computer case; Please refer to the directions in your case manual.
- Install the PSU into the case with the four screws provided.
- If your motherboard requires a 24-pin Main Power connector, please connect the 20+4 pin Main Power connector to the motherboard. If your motherboard only requires a 20-pin Main Power connector, please detach the 4-pin connector from the 20+4-pin Main Power connector then connect only the 20-pin connector to the motherboard.
- 4.1 For a motherboard that only requires a 4-pin ATX 12V (CPU) connector, please detach a 4-pin connector from the 4+4 pin ATX 12V connector and connect it to the motherboard. (Either one of the 4-pin from the 4+4 pin ATX 12V connector will work).
- 4.2 For a motherboard that requires a single Spin EPS connector, please use the 4+4 pin connector from the power supply.
- Connect other peripheral power connectors to devices such as hard drives, optical drives, etc.
- If your graphic card requires PCI-E power connector, please connect corresponding PC lE connector instructed by your graphic card’s user manual. Please note the power supply utilizes an unique 6+2 pin PCI-E connector that can be effectively used as a single Spin or 6 pin PCI-E connector. To use it as a 6 pin PCI-E connector, please detach the 2 pin connector from the 6+2 pin connector.
- Close your computer case and connect the AC power cord to the power supply AC inlet.
Output Specification
| P/N | DC OUTPUT | +3,3 V | +5 V | +12 V | -12 V | +5 VSB | CONTINUOUS POWER |
|---|---|---|---|---|---|---|---|
| AB226501 (Black) | **** |
AC Input
| Input Voltage: 200 V – 240 V
Input Current: 12 – 6 A / Frequency: 47 Hz – 63 Hz
| ****
750 W
Rated Current| 20 A| 20 A| 62,5 A| 0.3 A| 3 A
Max Output Power| 100 W| 750 W| 3,6 W| 15 W
Total Protection
-
Over Voltage Protection
Voltage Source| Protection Point
---|---
+3,3 V| +5,2V Max.
+5 V| +7,0V Max.
+12 V| +16,0V Max. -
Over Power Protection
Protection at 115%-150% full load. -
Short Circuit Protection
Activated when any DC rails short
short-circuited.
EMI & SAFETY
UL/CUL, TUV, GOST, CE, FCC and BSMI.
Environments
- Operating temperature: +OºC to +40°C
- Operating humidity: 20% to 90%, non-condensing
- MTBF: > 120,000 hours
MEANING OF THE DUSTBIN SYMBOL
Protect our environment: do not dispose of electrical equipment in your domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. These simple steps can help to avoid the potential effects that incorrect waste disposal can cause on the environment and human health. This will contribute to recycling and other forms of re-use of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authorities.
MADE IN CHINA
-
Imported by: COLORS Information Technology, SL.
C/ Morse, 49 – Pol. Ind. San Marcos · 28906 Getafe (Madrid) -
CIF: B-84045574 · www.colors-it.es.
Please read this manual carefully before using the device. Save it for future reference. www.abysmgaming.com.