VIISAN FA Series Interactive Flat Panel Display User Guide
- September 19, 2024
- VIISAN
Table of Contents
FA Series Interactive Flat Panel Display
“`html
Specifications:
- Product Name: FA Series Interactive Flat-Panel Display
- Package Contents:
- Interactive Flat-Panel
- Power Cord
- Remote Control
- Stylus x 2
- User Guide
- Wall Mounting Bracket
- Vertical Brackets x 2
- M8 Screw x 4 (20mm length)
- M6 Self-tap Screw x 8 (50mm length)
- Expansion Rubber x 8 (100mm length)
- M8 Flat Washer x 8
Installation Steps:
-
Unpacking: Unpack the product and check that
all components are included. -
Install the Vertical brackets: Attach the
vertical brackets to the back of the Interactive Flat Panel using
the provided M8 screws. -
Wall Mount Installation: Mount the Wall
Mounting Bracket on the wall and attach the panel vertically on the
bracket using the M5 screw bolt. -
Connect The Power Cord: Plug the power cord
into the product and connect it to a power supply. -
Turn On The Power: Turn on the power switch at
the back and press the power button until the indicator turns
white.
Product Usage Instructions:
-
Front Interface: The front interface may vary
depending on the model. Refer to the product for specific
details. -
Power Button / LED Indicator: Check the LED
indicator status for power information.
Frequently Asked Questions (FAQ):
Q: What should I do if any components are missing from
the package?
A: If any items are missing, please contact the
retailer where you purchased the product for assistance.
“`
FA Series Interactive Flat-Panel Display
User Guide
Table of Contents
Instructions ……………………………………………………………………………… 1 Safety Warning
…………………………………………………………………………. 1 Package Contents ……………………………………………………………………..
3 Installation Steps ……………………………………………………………………… 4 Product Function
Description ……………………………………………………… 7 External Computer & Touch Control
Connection …………………………… 11 Interface function ……………………………………………………………………… 12
Remote Control Function Keys Description …………………………………… 13 Installing the OPS
computer (Optional) ………………………………………… 14 Maintenance
……………………………………………………………………………. 15 Hazardous Materials Table
……………………………………………………….. 17
Instructions
Thank you for choosing our product. We sincerely hope that our Smart
Interactive Flat-Panel can bring convenience to your team cooperation. Before
using the product, please carefully read the User Guide, as it briefly
describes the steps to start using this product.
Note:
± We reserve the right to improve the products described in this user manual,
and no further notice will be given in the event of changes.
± For any discrepancies between the information, images, and textual
explanations in this user manual, please refer to the actual product.
Important Safety, Compliance and Warranty Information
SAFETY WARNING!
Placement
· Please do not place the product in unstable or easily tilted locations. ·
Please avoid placing the product in areas where direct sunlight can reach,
near heating devices
such as electric heaters, or other heat sources and strong light sources. ·
Please avoid placing the product near devices with strong radiation. · Please
do not place the product in damp or liquid-splashed areas.
Power
· Please check and ensure that the voltage value on the nameplate of the rear
shell matches the main power supply voltage.
· Please unplug the power cord and antenna plug during thunderstorms and
lightning weather. · Please unplug the power plug when there is no one indoors
or when not in use for a long time. · Please avoid physical or mechanical
damage to the power cord. · Please use a dedicated power cord and do not
modify or extend the power cord. · Please check and ensure that the ground
wire of the AC power cord is connected, otherwise it may
cause abnormal touch writing.
Screen
· Please do not use hard or sharp objects instead of our supplied writing pens
on the screen to avoid affecting the visual effect and writing.
· Please unplug the power before cleaning the product. Use a soft, dust-free,
and dry cloth to clean the screen.
· Please do not use water or liquid detergent to clean the product. · Please
contact the authorized reseller for thorough cleaning. · Please do not display
a high-brightness image on the screen for a long time.
1
Temperature & Humidity
· Do not place this product near electric heaters or radiators. · When moving
the product from a low-temperature area to a high-temperature area, please
allow
it to sit for some time to ensure that any internal condensation dissipates
before powering it on. · The operating temperature of the product is 0°C
40°C. · Do not expose this display to rain, moisture, or areas near water. ·
Please ensure indoor dryness and ventilation.
Ventilation
· Please place the product in a well-ventilated area to ensure good heat
dissipation. · Please place the product in an area with adequate ventilation,
leaving at least a 10cm-space on the
left, right, and back, and a 20cm-space above the product.
Disclaimer
The following circumstances are excluded from warranty coverage:
· Product damage caused by catastrophes, lightning strikes, faulty electric
power, and environmental factors.
· Defacement of product labeling (label alterations and falsification, missing
serial numbers, serial numbers no longer discernible, or invalid serial
numbers). All serial numbers are recorded and tracked for warranty purposes.
· Unauthorized changes to non-parts, modifications or alterations, or removal
of parts from the products.
· Damage caused by operator error or failure to comply with user manual
instructions, such as improper storage resulting in the product getting wet,
corrosion, falling, being squeezed, or exposure to inadequate
temperature/humidity environments.
· Accessories or packing materials such as boxes, user manuals, etc.
2
Package Contents
Before use, please ensure that the following items are included in the package. If anything is missing, please contact the retailer where you purchased the product.
Interactive Flat-Panel
Power Cord
Remote Control
Note: The power cord may vary depending on the region.
Stylus x 2
User Guide
Wall Mounting Bracket
Vertical Brackets x 2
M8 Screw x 4
(20mm length)
M6 Self-tap Screw x 8
(50mm length)
Expansion Rubber x 8
M5 Screw × 2
(100mm length) Note: The M5 screws come attached to the vertical brackets.
3
M8 Flat Washer x 8
Installation Steps
Unpacking
Install the Vertical brackets
Attach the vertical brackets to the back of the Interactive Flat Panel. Note:
The appearance of the back varies depending on its size.
Back of Interactive Flat Panel
M8 Screw
M8 Screw
M8 Screw M8 Screw
Vertical Brackets
4
Wall Mount Installation
Hold the Wall Mounting Bracket steadily against the wall, ensuring it is
level. Then, mark the 8 positions for the drill-in mounting holes. Next, use
the supplied M6 self-tap screws and M8 flat washers to attach the mounting
bracket to the wall. Tighten each bolt with a socket wrench as shown in the
following diagram.
M8 Flat Washer
Mounting Hole
Recommended drilling depth is at least 55mm.
M6 Self-tap Screw
Expansion Rubber
Wall
Mount the panel vertically on the bracket to complete installation and ensure that the panel is kept in the center of the bracket. Then, tighten the M5 screw bolt on the vertical bracket and secure it to the wall mounting bracket.
Wall
Note: It’s recommended to have at least two people install the wall mounting
bracket simultaneously. Avoid self-installation to prevent injury due to
improper operation.
5
Connect The Power Cord
1. Plug the power cord into the power socket of the product. 2. Connect the
plug to the power supply.
1
2
Turn On The Power
1. Turn on the power switch from the back side. 2. Press the power button to
boot the product until the indicator turns white.
2 1
6
Product Function Description:
The front interface, button functions, and silkscreen descriptions may vary
depending on the model. Please refer to the actual product for accurate
details
Front Camera
Microphone Array
Microphone Array
Front I/O
Microphone Array Motion Sensor NFC Quick Launch Pen Detection
Key Features:
· Tempered protective glass · Infrared touch technology · Built-in Android 13,
supporting Dual-OS (Android and Windows) · Dual Wi-Fi modules (Wi-Fi 6+5) ·
Supports full-channel touch writing and annotation functions · Supports area
and full-screen screenshots in any channel · Embedded interactive whiteboard
software · Comes with a hideable floating toolbar for quick operations ·
Powerful audio and video processing technology, built-in ViiTalk Rooms video
conferencin software
7
Front Interface:
12
3
4
5
6
7
8
Item Function
Description
· Press briefly to turn on the display or switch from On to Standby Mode.
· Press and hold for 2 seconds to turn off the display to Standby Mode. (Note: when entering Standby Mode, the screen will display a 9-second countdown)
1
Power Button / LED Indicator
LED Indicator Status: Power Off: No light (When disconnected from power)
Powered On: White light emitted
Standby Mode: Red light emitted
Sleeping Mode: Red and white flashing
2 Reset
Press and hold to reset the OPS
3
Light Sensor / Ambient light sensor / Infrared signal receiver IR receiver
4 Type-C 5 HDMI IN 6 TOUCH 7 USB 3.0 8 X-MIC
For connecting to external USB devices (Supports DP with 65W) For HDMI high definition audio and video signal input For PC connectivity with touch control For connecting to external USB devices For X-MIC wireless neck-hanging microphone infrared pairing receiver
8
Back Interface:
NOTE: The product back and rear cover may vary in size depending on the model.
Please refer to the actual product for accuracy.
OPS Slot
Left Interface
Right Interface
1
3
4 56 7
USB USB
TOUCH
HDMI 2
TOUCH
HDMI 1
HDMI OUT RJ45 (LAN) (Public) (Android) TF CARD
2
Item Function
Description
1
TOUCH
For PC connectivity with touch control
2
HDMI 1/2
For high definition audio and video signal input
3
HDMI OUT
For high definition audio and video signal output
4
RJ-45 (LAN)
Connect the RJ-45 ethernet
5
USB (Public)
For connecting to external USB devices
6
USB (Android) For connecting external USB devices to Android system.
7
TF CARD
TF card slot
9
1 2
Item Function
1
ON/OFF
2
AC-IN
Description Power switch “I” indicates the Power-On state, “O” indicates the Power-Off state. AC power input
Bottom Interface:
Botton I/O
1
23
4
5
Item Function
1
S/PDIF
2
LINE OUT
3
LINE IN
4
Microphone
5
RS232
Description For optical audio signal output For connecting to a 3.5mm audio output device For connecting to a 3.5mm audio input device For connecting a microphone input For connecting a central control device with a RS232 interface
10
External Computer & Touch Control Connection
Reverse Touch Control Connection
1. Connect one end of the HDMI cable to the computer’s HDMI output port, and
the other end to the Interactive Flat-Panel’s HDMI input port.
2. Connect the USB cable from the external computer’s USB port to the
Interactive Flat-Panel’s USB Touch port.
3. Start the external computer. 4.Start the Interactive Flat-Panel. 5. Select
the signal source of the Interactive Flat-Panel to the external computer
channel.
IFPD HDMI
HDMI cable
External Computer
HDMI
USB cable
USB
TOUCH
or IFPD USB-C
USB Type-C cable
External Computer
USB-C
11
Interface function
HDMI Signal input IFPD
HDMI cable
HDMI
RS232 device connection
IFPD
RS232 cable
RS232
USB device connection IFPD
USB USB
(Public) (Android)
USB cable
Audio signal output IFPD
Computer
HDMI
Central Control Device Keyboard/Mouse/USB Drive
Amplifier/Home Theater
Line-Out
Audio cable
Line-In
12
Remote Control Function Keys Description
Precautions when using remote control
1. Ensure the remote control towards the display’s IR sensor for effective
operation. 2. Avoid excessive vibration when handling the remote control. 3.
Direct sunlight or strong lighting on the sensor window may cause malfunction;
adjust lighting or
angle if necessary. 4. Replace low batteries promptly to maintain optimal
performance; remove batteries if not using for
an extended period to prevent corrosion. 5. Use only one type of battery,
avoid mixing old and new, and follow proper disposal guidelines;
never dispose of batteries in fire or attempt to charge, disassemble, or
short-circuit them. 6. Prevent exposure to extreme heat or sunlight to avoid
battery damage.
Functions Description
Long-press turn on Power On/Off Short-press enter to sleep mode Mute / Unmute
Audio Up / Down Left / Right Confirm / OK Enter the Source Selection Page Go
to the Home Page Return to Previous / Exit Volume Up Volume Down Android
Screen Casting Freeze / UnFreeze the Screen Go back to the previous page Go to
the next page
13
Installing the OPS computer (Optional)
CAUTION
1. The OPS computer does not support hot plugging. Therefore, you must insert
or remove the OPS computer when the display is powered off. Otherwise, the
Interactive Flat-Panel or OPS computer may be damaged.
2. Additionally, you will need to purchase the OPS computer separately and
follow the steps below to install the OPS.
OPS Slot Cover
Step 1 Loosen the external M3 screws of the OPS slot on rear of the interactive flat-panel and remove the cover.
OPS
Step 2
Insert the OPS computer into the OPS slot on the rear of the
interactive flat-panel.
M3 screws
Step 3 Secure the OPS computer to the interactive flat-panel by using the M3 screws.
Step 4 Ensure the installation is correct before turning the power on again.
14
Maintenance
Protecting the product from dust and moisture will help prevent unexpected
failures. Please clean the product regularly with a soft, dust-free, dry
cloth. Ensure to unplug the product before cleaning.
Cleaning the Screen
1. Dissolve fabric softener or detergent in 75% alcohol.
2. Soak a piece of soft cloth in the solution.
75%
3. Squeeze the cloth dry before use.
4. Do NOT allow the cleaning solution to drip onto other
components of the product.
Cleaning the Touch Frame Clean the touch frame with dry, soft, lint-free wipes.
15
Long Periods of IFP Inactivity:
When the product is not used for an extended period, be sure to unplug the
power plug to prevent potential damage to the product from power surges such
as lightning.
1
2
3
1. Turn off the power switch of the interactive flat panel. 2. Unplug the power cord from the interactive flat panel. 3. Unplug the external power plug.
16
Hazardous Materials Table
Part Name
Lead (Pb
Display Housing PCBA Components Power Cord and Cables Metal Parts Packaging Materials Remote Control Speakers Accessories*
Toxic and Hazardous Substances or Elements
Mercury Cadmium
(Hg)
(Cd)
Hexavalent chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
This table is prepared in accordance with the provisions of GB/T 26572 *: The
circuit board components include PCBs and the electronic elements that
constitute them; packag-
ing materials include packaging boxes, protective foam (EPE), etc.; other
accessories include user manuals, etc.
: Indicates that said hazardous substance contained in all of the homogeneous
materials for this part
is below the limit requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the
homogeneous materials used
for this part is above the limit requirement of GB/T 26572. This table
indicates that the machine contains harmful substances. The data is based on
material types provided by material suppliers and verified by us. Some
materials contain harmful substances that cannot be replaced according to
current technological standards. We are continuously striving to improve this
aspect.
The environmental use period of this product is 10 years. The symbol indicating restricted use of hazardous substances is shown in the left image. The product’s service life refers to its effectiveness when used under normal conditions as specified in the product manual.
The symbol of the crossed-out wheeled bin indicates that this product should not be placed in municipal waste. Instead, dispose of waste equipment by taking it to a designated collection point for electrical and electronic equipment recycling.
17
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>