Bali N300608 Palladian Window Shelf Instruction Manual
- September 18, 2024
- Bali
Table of Contents
Bali N300608 Palladian Window Shelf
Getting Started
Remove shelf from the package. Be sure to keep the packaging until finish installation and working to your satisfaction. Please take a moment to review the following installation guide for proper installation.
Tools
- Level
- Measuring Tape
- Pencil
- Power drill
Check Hardware
Check your package for contents need for proper installation.
Trapezoidal Block /Screws | Qty (pcs) |
---|---|
Trapezoidal Block | 2 |
M4X20mm Screw | 2 |
M4.5×63.5mm Screw | 4 |
-
Trapezoidal Block
-
M4X20mm Screw
-
M4.5×63.5mm Screw
Installation Instruction
Step 1: Install Trapezoidal Block
Measure the first screw location and mark on the wall, drill screw holes.
Use M4.5×63.5mm screws to secure trapezoidal blocks.
*The two screws holes in the trapezoidal block should be in the same level.
Step 2: Install Palladian Window Shelf
*Align the mouth of Palladian Window Shelf to the Trapezoidal Block and push it in.
Use M4X20mm screws to fix Palladian Window shelf and trapezoidal blocks at both sides,
The screws holes are pre-drilled.
Finished
Documents / Resources
| Bali
N300608 Palladian Window
Shelf
[pdf] Instruction Manual
N300608 Palladian Window Shelf, N300608, Palladian Window Shelf, Window Shelf,
Shelf
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>