Bali SR79TB-C 36 Inch Lattice Campfire Ring Instruction Manual
- June 10, 2024
- Bali
Table of Contents
Bali SR79TB-C 36 Inch Lattice Campfire Ring
Product Information:
The 36 Lattice Campfire Ring (Item # 1719004, Model # SR79TB-C) is a fire ring panel that comes in a package of 4. The package also includes 12 BM8 nuts and 12 CM8 x 10 mm bolts for assembly. The estimated assembly time for the product is 5 minutes, and an adjustable wrench is required for assembly. The product is designed to be inspected and cleaned regularly to ensure product safety and longer product life.
Product Usage Instructions
- Before assembling the product, ensure that all parts are present and compare them with the package contents list and hardware contents provided in the manual. If any part is missing or damaged, do not attempt to assemble the product.
- Read and understand the entire manual before attempting to assemble, operate, or install the product.
- Use an adjustable wrench to remove the BM8 nuts (B) from the CM8 x 10 mm bolts (C).
- Connect the fire ring panels (A) with CM8 x 10 mm bolts (C) and secure them with BM8 nuts (B).
- Inspect the product regularly to ensure product safety and longer product life. Do not attempt to inspect the product until the fire is COMPLETELY out and cooled down. Check components for any signs of damage or rust, and if any component is damaged, do not use it until repairs are made.
- Clean the product on a regular basis to promote safer use and longer product life. After repeated use, the finish may discolor slightly. Do not attempt to clean the product until the fire is COMPLETELY out and cooled down. Do not use oven cleaner or abrasive cleaners as they will damage the product. Wipe exterior surfaces with a mild dishwashing detergent or baking soda. For stubborn surfaces, use a citrus-based degreaser and a nylon scrubbing brush. Rinse clean with water. Remove built-up creosote from components with a chimney cleaning product.
- Do not move or store the product until the fire is COMPLETELY out and cooled down. Once the fire is out, coals are cold, and the product is cool to touch, remove ashes and properly dispose of them. Store the product in a location away from children and pets. If you do not use a cover, store the product in a dry location to maximize product life.
WARNING : This product can expose you to chemicals including soot, which is known in the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov.
Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-909-3888, 7:30 a.m. – 4:30 p.m., PST Monday – Friday. Or e-mail : customerservice@shinerich.us.
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fire Ring Panel | 4 |
HARDWARE CONTENTS
(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product
WARNING:
- FOR OUTDOOR USE ONLY.
- Do not use the fire ring indoors. Carbon monoxide fumes, due to lack of ventilation, can cause death.
- Do not use gasoline or kerosene to start fires in the fire ring. Keep all flammable liquids away from the fire ring.
- This unit is designed to burn charcoal and untreated wood only.
- Do not use under or on combustible structures/surfaces including wooden decks.
- Use protective gloves and long-handled tools with this fire ring.
- Dispose of packaging materials properly.
- Keep children away from hot fire ring.
- Fire ring remains very hot for a period of time after using.
- Be sure fire ring is cool before attempting to move it.
- The fire ring should be placed no closer than 24 in. from walls during use.
CAUTION : Assemble the fire ring on a non-abrasive surface.
WARNING:
This product can expose you to chemicals including soot, which is known in the
State of California to cause cancer, and carbon monoxide, which is known to
the State of California to cause birth defects or other reproductive harm. For
more information, go to:
www.P65Warnings.ca.gov.
PREPARATION
Before assembling product, make sure all parts are present. Compare parts with package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes
Tools required for assembly (not included): Adjustable Wrench
ASSEMBLY INSTRUCTIONS
- Remove M8 nuts (B) from M8 x 10 mm bolts (C). Connect the fire ring panels (A) with M8 x 10 mm bolts (C) and secure with M8 nuts (B).
Hardware Used
CARE AND MAINTENANCE
Inspecting
Inspect this item on a regular basis to ensure product safety and longer
product life. DO NOT attempt to inspect this item until the fire is COMPLETELY
out and cooled down.
- Check components for any signs of damage or rust.
- If any component is damaged, do not use it until repairs are made.
Cleaning
-
Clean this item on a regular basis to promote safer use and longer product life.
Note : After repeated use, the finish may discolor slightly. -
DO NOT attempt to clean this item until the fire is COMPLETELY out and cooled down. DO NOT use oven cleaners or abrasive cleaners as they will damage this product.
-
DO NOT clean any part of this item in a self-cleaning oven as it may damage this finish.
-
Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush. Rinse clean with water. -
Remove built-up creosote from components with a chimney cleaning product.
-
Storage
DO NOT move or store this item until the fire is COMPLETELY out and cooled down.
- Once the fire is out, coals are cold and item is cool to touch, remove ashes and properly dispose of.
- Store in a location away from children and pets.
Note : If you do not use a cover, store this item in a dry location to maximize product life.
36” LATTICE CAMPFIRE RING
ITEM # 1719004
MODEL # SR79TB-C
ONE-YEAR LIMITED WARRANTY
The item has been manufactured under the highest standards of quality and
workmanship. We warrant to the original consumer/purchaser that all aspects of
this product will be free of defects in material and workmanship for one (1)
year from the date of purchase. A replacement for any defective part will be
supplied free of charge for installation by the consumer. Defects or damage
caused by the use of other than genuine parts are not covered by this
warranty.
This warranty shall be effective from the date of purchase as shown in the
purchaser’s receipt.
This warranty is valid for the original consumer/purchaser only and excludes
industrial, commercial or business use of the product, product damage due to
shipment or failure which results from alteration, product abuse, or product
misuse, whether performed by a contractor, service company, or consumer. We
will not be responsible for labor charges and/or damage incurred in
installation, repair or replacement, nor for incidental or consequential
damage. This warranty gives you specific rights, and you may also have other
rights that vary from state to state.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>