Ark Electronics PCF2380E All In One PC User Manual

PCF2380E All In One PC
User Manual

Thank you for choosing our All-in-One PC,Please read this user manual carefully before using this product and retain it for future reference.

Starting for the first time

When you start your computer for the first time,a series of screens appear to guide you in configuring your windows 10 operating system.
To start your All-in-One PC for the first time:

1. Press the power button on your All-in-One PC.Wait for a few minutes until the setup screen appears.
2. From the setup screen,pick your region and a language to use your computer.
3. Carefully read the License Terms,Select I accept.
4. Follow the onscreen instructions to configure the following basic items:

• Personalize
• Get online
• Settings
• Your account 5. Once the setup process is complete,the start screen appears.

Technical Details

2.5 GHz, with Turbo Boost up to  3.1GHz w/HD Graphics 4600)
Wireless| 802.11ac Wi-Fi wireless networking;IEEE 802.11a/b/g/n compatible, Bluetooth 4.2 wireless technology
Ram| 4GB DDR3
Rom|  256GB SSD
Video Support| VGA video output,HDMI video output

1. Press the computer power switch located on the back of the host to start the computer and enter the operating system.
   

2. Precautions for moving the pc.
   

Shutting down (turning off) the computer

The Shut down command closes all open programs, including the operating system, and then turns off the computer. Shut down the computer under any of the following  conditions:

1. When you need to access components inside the computer
2. When you are connecting an external hardware device that does not connect to a USB or video port or to a headphone or microphone jack
3. When the computer will be unused and disconnected from external power for an extended period
   Although you can turn off the computer with the power button, the recommended procedureis to use the Windows Shut down command.

Connecting Bluetooth devices

Before you can use a Bluetooth device, you must establish a Bluetooth connection.

1. Type bluetooth in the taskbar search box, and then select Bluetooth and other devices settings.
2. Enable Bluetooth, if it is not already enabled.
3. Select Add Bluetooth or other device, and then in the Add a device dialog box, select Bluetooth.
4. Select your device from the list, and then follow the on-screen instructions

Dialy maintenance

1. Please pay attention to heat dissipation during use, especially pay attention to the following points:
   1): Do not let the direct sunlight on your all-in-one computer.
   2): Do not place the all-in-one computer near a heat source. 3): Do not block the heat dissipation hole of the all-in-one computer with other objects during use.

2. Do not spill water and other liquids on the all-in-one computer. If this happens accidentally, you should immediately disconnect the all-in-one computer power.

3. Dust is also bad for the use of the all-in-one computer. At regular intervals, such as half a year, the all-in-one computer should be cleaned.

4. Avoid putting pressure on the LCD screen surface and avoid wiping the LCD screen surface with water.

FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not  installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withminimum  distan ce 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>