MCAShop KSP-180 Portable Wired Wireless Karaoke System User Guide

MCAShop KSP-180 Portable Wired Wireless Karaoke System

KNOW YOUR SPEAKER

1. Light RGB
2. Mode (BT, USB/TF, FM, TWS)
3. Previous song / Vol –
4. Play or pause
5. Bass button
6. OFF/ON
7. Aux 3.5
8. Micro SO port
9. Charging port
10. USB port
11. Microphone slot

HOW TO USE

BT
Turn on the speaker and it will come into the BT mode directly. After pairing the device, now you can play music on it. Press button (4) to Play/Pause. Short press (3) or (5) button to be previous track or next track, long press (3) or (5) button to increase or decrease the Volume.

use / MICRO SD
Insert the USB (11) or Micro SO card (9) into the slot, KSP-180 will read the MP3 format music automatical­ly. Press button (4) to Play/Pause, press (3) or (4) button to previous track and next track.

FM RADIO
Press (4) to search FM channels automatically. This operation will scan all FM stations and Pre-record them to memory. The scan procedure will take several minutes and cannot be interrupted. Once completed, you can short press (3) or (4) button to move forward or backward. Long press (3) or (4) buttons to increase or decrease the Volume.

Note : There is no built-in antenna, please using Audio cable as the antenna when FM mode is activated.

RGB LIGHTS
The speaker has different light modes, short press (1) button to switch RGB light mode. The last RGB light mode will be remembered by the unit itself.

ADJUST THE BASS
Short press (6) button will enhance bass effects, it will make bass more obvious.

TWS
Two same unit speakers, turn on them first, choose one unit and long press its (2) button for several seconds, when you heard the sound of “Ding-tong”, that is to say the two units have already paired well. Please ensure before pairing the two units have not connected with other devices.

CHARGING

• Plug the USB cable into the speaker’s charging port (10) and connect to a power outlet.
• The red LED indicator on panel will be lit when the unit is charging.

DATA SHEET

limited product warranty

Vorago equipment and / or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation defect, provided they have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago warranty the buyer the absence of anomalies regarding the materials.

Months
LCOMonitor
Except in panel (Screen display) for whichit will only be 12 months| 36 Months•
Computerequipment3yearsincludingNanotlay3.
• ExcepEt impute, equipment where the p,ones is integratl!’d onthemothertloarditwillonlybe12months| 36 Months •

Important warranty policy : Please read and complete this warranty policy and seal it in the store when purchasing the product.

Product: Karaoke speaker|
---|---
Model: KSP-180| Dealer stamp
Brand: Vorago
Serial number
Invoice number:
Delivery date·

Responsibilities
The total responsibility of Vorago will be to repair or replace the product, including labor and parts, at no cost to the buyer when it is returned to the point of sale, presenting this warranty policy properly completed and stamped by the establishment where it was purchased. The product or copy of the receipt or receipt or Invoice, in which data of the product the date of purchase is specified, to verify the times within the warranty.

Vorago may use new parts, restored or used in good condition to repair or replace any product, at no additional cost to the consumer. In the case of equipment and / or accessories that can not be repaired, the change will be generated by a similar product or with superior characteristics.

This warranty covers the transportation expenses of the product derived from its fulfillment; which will be directly attributable to the supplier of the product. In all replacement products, the original warranty period will be renewed. Vorago is governed by international standards for the manufacture of products.

How to obtain warranty support
Warranty claims are processed through the point of sale, during the first ls days after the purchase. as long as they meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the product purchased should be sent with the prepaid guide by Vorago to the address of the Vorago headquarters in Francisco Villa No. 3, Col. San Agustin, CP 45645, Tlajomulco de Zuniga, Jalisco, Mexico.

Except In situations of force majeure or fortuitous event, the repair time In no case will be greater than 30 calendar days from the date of receipt of the equipment in Vorago.

Exduslons
This warranty Is has valid In the following cases:

• When the product had been used in conditions other than normal.
• When the product has not been operated in accordance with the instructions for use.
• When the product has been altered or repaired by unauthorized persons by  Vorago.

Vorago does not offer any other express warranty for this product
To make the warranty valid, as well as the acquisition of parts, components, consumables, and accessories  To validate a warranty, the following Information must be sent to the email: garantlasovoragollve.com

1. Model and color
2. Product failure
3. Ticket or purchase Invoice (dog/Uzed)
4. Your address with CP, telephone and full Name.

Available in the establishment where the product was purchased and/or in our central offices:

Returns
In the case of product return, It will only be the place of purchase by the end customer. Subject to the return policies established by the same seller.

• Vorago, SA de CV.
• FranciscoVillaNo.3
• Col. San Agustfn, C.P. 4S645
• Tlajomulco deZllliiga,
• Jalisco,Mexico.
• Tel. (33) 3044 6666
• lmportadora Global Rida S.A. de CV.
• Matilde Marquez No. 68
• Colonla PeMn de los Barios C.P. 1ss20
• Alcaldfa Venustiano carranza, CDMX
• RFC: IGR1510164C2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>