HASSELBLAD XCD 3 2-4 5 Lens Its First Ultra Wide User Guide
- September 18, 2024
- HASSELBLAD
Table of Contents
HASSELBLAD XCD 3 2-4 5 Lens Its First Ultra Wide
EXPLODED VIEW
PARTS
-
XCD 3,2-4,5/20-35E Lens
-
Lens Shade
-
Front Lens Cap*
-
Rear Lens Cap*
-
Lens Protective Pouch
The front and rear lens caps are attached to the lens before delivery.
Documents
- Quick Start Guide
- Warranty Leaflet
- Registration Card
OVERVIEW
| 1 | 2 |
|---|---|
| Zoom Ring | Focus Ring |
DISCLAIMER
Carefully read this entire document and all safe and lawful practices provided before use.
WARNING
- Keep the lens protected when used in rainy or humid environments and DO NOT use in dusty environments. If dust or liquid gets inside the lens, the performance may be negatively affected.
- Place the camera and the lens on a flat surface. Otherwise, the camera and lens may fall and be damaged.
- DO NOT scratch the lens. Be sure to protect the lens during transportation.
- DO NOT place the lens under direct sunlight. Strong light may damage the lens and may even cause a fire hazard.
- When lifting the camera, always hold the camera body first, not the lens.
INTRODUCTION
The XCD 3,2-4,5/20-35E is an ultra wide-angle zoom lens in the HASSELBLADTM X System medium format lens range. It features 16 elements in 12 groups including three aspheric elements. The 16-27mm FF equivalent focal length delivers a top-class optical performance, making it suitable for landscape, as well as interior and architectural photography.
- Ultra wide-angle: provides the widest angle of view in the Hasselblad X System lens range until now.*
- Upgraded leaf shutter: provides a shutter speed of up to 1/2000s and delivers flash synchronisation at all speeds.
- Newly designed focusing module: for quick and accurate focusing.
- Up until the release of the XCD 3,2-4,5/20-35E lens.
MTF
Every Hasselblad lens is manufactured under strict regulations and must pass
multiple stringent tests. An MTF chart is used to reflect the ability of a
lens to reproduce contrast and resolve details. Low spatial frequencies
reflect overall contrast and high spatial frequencies reflect detail
resolution. MTF 100% indicates ideal performance.
The horizontal axis represents the image height (distance of a given point on
the lens from the center of the sensor). The vertical axis represents the
contrast value (maximum number of 100).
Modulation Transfer as a function of image height at infinity settings.
Sagittal slit orientation drawn with continuous line and tangential with
dashed. White light. Spatial frequencies 10, 20, and 40 lp/mm.
SPECIFICATIONS
| Focal Length | 20 (35) mm |
|---|---|
| Equivalent Focal Length (24×36) | 16 (27) mm |
| Aperture Range | f/3,2-f/32 (f/4,5-f/32) |
| Angle of View (diag/hor/vert) | 108°/96°/79° (76°/65°/51°) |
| Lens Length/Diameter | 117/81 mm |
| Length (distance from camera lens mount flange | 112 mm |
| Weight (excl. caps and lens shade) | 805 g |
| Filter Diameter | 77 mm |
| Compatibility* | Hasselblad X System cameras and 907X cameras |
- A camera firmware update is required to use all functions of the lens. Pay attention to the release notes on the official Hasselblad website.
Visit the official Hasselblad website to download the whole datasheet for the
lens.
https://www.hasselblad.com
COMPLIANCE INFORMATION
FCC Compliance Statement： Supplier’s Declaration of Conformity
Product name: XCD 3,2-4,5/20-35E
Model Number: XCD 3,2-4,5/20-35E
Responsible Party: Hasselblad Bron Inc.
Responsible Party Address: 1080 Garden State Road Ste1 Union NJ 07083 USA
Website: www.hasselblad.com
We, Hasselblad Bron Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
CAN ICES-003 (B)/NMB-003(B)
EU Compliance Statement: Victor Hasselblad AB hereby declares that this
device (XCD 3,2-4,5/20-35E) is in compliance with the essential requirements
and other relevant provisions of the Directive 2014/53/ EU.
A copy of the EU Declaration of Conformity is available online at
www.hasselblad.com/eurocompliance
EU contact address: Utvecklingsgatan 2, 41756 Goteborg, Sweden
GB Compliance Statement: Victor Hasselblad AB hereby declares that this
device (XCD 3,2-4,5/20- 35E) is in compliance with the essential requirements
and other relevant provisions of Radio
Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at
www.hasselblad.com/euro-compliance
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>