PHILIPS BDP100 TownGuide Performer Lighting Owner’s Manual
- September 18, 2024
- Philips
Table of Contents
BDP100 TownGuide Performer Lighting
“`html
Specifications
-
Product: TownGuide Performer BDP100 LED30/740 II DS PCF GR
62P -
Light Source: LED module 3000 lm
-
Color Temperature: 740 neutral white
-
Safety Class: II
-
Material: Polycarbonate bowl/cover frosted, Gray
-
Mounting: Post-top for diameter 62 mm
-
Input Voltage: 220-240 V
-
Power Consumption: 19.6 W
-
IP Rating: IP66 (Dust penetration-protected, jetproof)
-
Impact Protection: IK10 (20 J vandal-resistant)
-
Warranty: 5 years
Product Usage Instructions
Installation
-
Ensure the mounting surface is suitable for the post-top with a
diameter of 62 mm. -
Securely attach the luminaire using appropriate fixtures and
fittings.
Electrical Connection
-
Connect the luminaire to a power source with an input voltage
of 220-240 V. -
Use the provided screw connection block for electrical
connection.
Maintenance
Regularly clean the optical cover and ensure all parts are free
from debris for optimal performance.
FAQ
Q: Is the LED module replaceable in the TownGuide Performer
BDP100?
A: Yes, the LED module is replaceable in this luminaire.
Q: Can the TownGuide Performer BDP100 be dimmed?
A: No, this luminaire does not have dimmable capability.
Q: What is the warranty period for the TownGuide Performer
BDP100?
A: The warranty period for this product is 5 years.
“`
Lighting
TownGuide Performer
BDP100 LED30/740 II DS PCF GR 62P
BDP100 | TOWNGUIDE PERF FLAT CONE, LED30 | LED module 3000 lm, 740 neutral
white, Safety class II, Distribution symmetrical, Polycarbonate bowl/cover
frosted, Gray, Post-top for diameter 62 mm
The TownGuide Performer family consists of six recognizable, yet modern
shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire
has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl
(except Tzero, which is only available with a clear bowl). With an extensive
range of lumen packages, neutral white or warm white LED lights sources, and a
range of dedicated optics for lower mounting heights, it’s easy to select the
version that best suits the specific requirements of your project. All this
combined with a long life expectancy of 100,000 operating hours. In addition,
TownGuide Performer has a variety of control system options that can make this
luminaire an integral part of smart energyreduction programs. This includes
LumiStep, DynaDimmer, and LineSwitch standalone dim control, and Coded Mains
group control, right up to seamless remote connectivity with Interact lighting
management software. Installation is easy. Thanks to the bayonet whistle
connector with integrated gland located in the spigot, there’s no need to open
the luminaire for installation. The Signify Service tag app offers direct
access to all relevant data, ensuring maintenance is easy too. Philips has
made every effort to make the Total Cost of Ownership (TCO) of the luminaire
as attractive as possible. And as TownGuide Performer is a dedicated LED
luminaire, compatible with a variety of control systems, there are significant
energy and maintenance cost savings compared with conventional lighting.
Product data
General Information Lamp family code
LED30 [LED module 3000 lm]
Light source replaceable Number of gear units
Datasheet, 2024, August 29
Yes 1 unit
data subject to change
TownGuide Performer
Driver included Light source engine type Service tag Product family code Lighting Technology Value ladder Serviceability class
Yes LED Yes BDP100 [TOWNGUIDE PERF FLAT CONE] LED Performance Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical Upward light output ratio Luminous Flux Standard tilt angle posttop Standard tilt angle side entry Luminous Efficacy (rated) (Nom) Correlated Color Temperature (Nom) Color rendering index (CRI) Light source color Optical cover type Luminaire light beam spread Optic type outdoor
3 1,710 lm 0° 87 lm/W 4000 K 70 740 neutral white Polycarbonate bowl/cover frosted 75° Distribution symmetrical
Operating and Electrical
Input Voltage
220-240 V
Line Frequency
50 to 60 Hz
Inrush current
22 A
Inrush time
0.29 ms
Power Consumption
19.6 W
Power Factor (Fraction)
0.95
Connection
Screw connection block 5-pole
Cable
–
Number of products on MCB of 16 A type B 26
Temperature Ambient temperature range
-40 to +35 °C
Controls and Dimming Dimmable Driver/power unit/transformer Control interface Constant light output
No Power supply unit regulating No
Mechanical and Housing Housing Material Reflector material Optic material Optical cover material Fixation material Housing Color
Aluminum Acrylate Polycarbonate Steel Gray
Mounting device Optical cover shape Optical cover finish Overall length Overall width Overall height Overall diameter Effective projected area Dimensions (Height x Width x Depth)
Post-top for diameter 62 mm Conical flat Frosted 570 mm 570 mm 209 mm 570 mm 0.051 m² 209 x 570 x 570 mm
Approval and Application Ingress protection code
Mech. impact protection code Surge Protection (Common/Differential)
Sustainability rating Protection class IEC Flammability mark CE mark ENEC mark
Warranty period EU RoHS compliant
IP66 [Dust penetration-protected, jetproof] IK10 [20 J vandal-resistant] Luminaire surge protection level until 6 kV differential mode and 6 kV common mode Lighting for circularity Safety class II Yes ENEC mark 5 years Yes
Initial Performance (IEC Compliant) Luminous flux tolerance Initial chromaticity Power consumption tolerance Init. Color Rendering Index Tolerance Standard Deviation of Colour Matching (McAdam ellipse)
+/-7% (0.38, 0.38) SDCM <5 +/-10% +/-2 SDCM5
Over Time Performance (IEC Compliant)
Driver failure rate at 5000 h
0.5 %
Control gear failure rate at median useful 5 %
life 50000 h
Control gear failure rate at median useful 10 %
life 100000 h
Lumen maintenance at median useful life* L99
50000 h
Lumen maintenance at median useful life* L97
100000 h
Application Conditions Performance ambient temperature Tq Maximum dim level
25 °C Not applicable
Product Data Order product name Full product name Full product code Order code
BDP100 LED30/740 II DS PCF GR 62P BDP100 LED30/740 II DS PCF GR 62P 871829190981100 910925866285
Datasheet, 2024, August 29
2
data subject to change
TownGuide Performer
Material Nr. (12NC) Numerator – Quantity Per Pack Net Weight (Piece) EAN/UPC –
Product/Case
Dimensional drawing
910925866285 1 6.200 kg 8718291909811
Numerator – Packs per outer box EAN/UPC – Case
1 8718291909811
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com 2024, August 29 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>