MINISO YB006 TWS Bluetooth Earphones User Manual

User Manual

YB006 TWS Bluetooth Earphones

EASY GO SERIES TWS WIRELESS EARPHONE
MODEL : YB006

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY

PARAMETERS

PRODUCT STRUCTURE

1. Touch Area (MFB Button)
2. Mic
3. Charging Case
4. Charging Case LED Light
5. USB-C Charging Port
6. Charging Case Button

USAGE

2.Pairing by Button: Open the charging case, long press the button as the earphones are inside the case. The white light is constantly on for 3s, then breathes for 5 times, then release the button when the orange light is on breathing mode, the green light is on for 4s then turns off, and the pairing is done.
Indicator light change| 1.The battery is higher than 30%, the green light is on. The battery is lower than 30%, the orange light is on.
2.When the charging case is charging, the orange light is on for 8s and then turns off.
3.When the charging case is fully charged, the green light is on for 8s and then turns off.
Wireless Charging| Put the charging case on the wireless charger to charge
| Earphones Instructions
Play/Pause| Press any earphone MFB button twice
Previous Track| Press left earphone MFB button three times
Next Track| Press right earphone MFB button three times
Volume+| Press right earphone MFB button once
Volume-| Press left earphone MFB button once
Answer/ End Call| Press any earphone MFB button twice
Reject Call| Long press any earphone MFB button for two seconds
Activate Phone’s Voice Assistant| Long press any earphone MFB button for two seconds
In-ear Detection| Press the left/right earphone MFB button five times to turn on/ off the in-ear detection
Remove Pairing/ Reset Mode| Open the charging case, connect the earphones to cellphone, keep the earphones inside the charging case. Long press the button of the charging case, the white light is on for 3s, then turns to breathe 5 times, release the button when the orange light is on breathing mode, the green light is on for 4s and then turns off. The pairing is removed, and you can re-pair with the phone.

CAUTION

1. Keep out of reach of children, to avoid danger caused by improper use of children.
2. Use the product under reasonable volume and time period to avoid hearing damage.
3. Do not use the product while driving, riding a bicycle, operating machinery, or working on something that requires you to pay attention to external sounds.
4. Do not store or use the product in an environment where the temperature is lower than -10°C or higher than 45° C. If the ambient temperature is too high or too low, faults may occur,
5. Avoid contact with water or other liquids to avoid damage to the internal circuit of the product.
6. Do not disassemble, hit, squeeze the product, or throw the product into fire to avoid explosion. If the battery bulges or leaks, stop using it,
7. Do not use the product during thunderstorms. Thunderstorms can cause abnormal operation of the device and increase the risk of electric shock.
8. When using this device, please keep at least 15 cm away from implanted medical devices (such as pacemakers, etc.).
9. Due to the characteristics of Bluetooth technology, the strength of the signal is related to the specific use environment. If there are more overlapping wireless signalls nearby or there is strong electromagnetic wave interference, the signal received by the product will become weaker or even disconnected.
10. If the product will not be used for a long time, please charge the product once every three months to avoid battery over-discharge damage.
11. Stop using the product before cleaning or maintaining it. Please wipe the equipment with a clean, dry soft cloth for cleaning;
12. It is recommended to use a charger from a brand manufacturer with certification, with an output voltage of 5V, Please avoid using fast-charging chargers with output voltage exceeding 5V to avoid excessive charging damage.

TROUBLESHOOTING

1. Wireless earphones fail to be paired with the phone.
   Solution: Check if the earphones are in pairing mode, and whether the phone has BT function on. Check the list on your phone, remove earphones from the list, follow the instructions of user manual to pair the earphones with your phone again.

2. Cannot turn on the wireless earphones.
   Solution: Check the battery to see if it is low.
   Can the battery of the wireless earphones be replaced?
   Answer: No. The lithium polymer battery in the earphones is irreplaceable.

3. The wireless earphones got disconnected with the phone within 10 meters.
   Solution: BT is wireless so that it is very sensitive to objects between the earphones and the connected device, Check if there are any metal or other objects that may affect the connection within the effective distance,

4. Cannot hear audio playing when the earphones are connected to the computer or phone.
   Solution: Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer.

5. Can I operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
   Answer: Some apps may not support being operated through the earphones due to their settings.

ACCESSORIES

Device 1, User Manual” 1, USB-C Charging Cable 1, String*1

FCC WARNING

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction,

IC WARNING

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

WEEE WARNING

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

www.miniso.com

Product Name: Easy Go Series TWS Wireless Earphone Model: YB006
Specifications: Pairing name
MINISO-YB006;Version 5.3
Battery type ; Lithium battery
Rated voltage : DC 5V
Charging port : USB-C;
Charging case battery capacity : 300mAh.
Material : ABS、PC
Usage: Please refer to the user manual.
Storage: Store in a cool and dry place.
Caution:

1. Use the product under reasonable volume and time period to avoid hearing damage.
2. Do not use the product while driving, riding a bicycle, operating machinery, or working on something that requires you to pay attention to external sounds.
3. Do not store or use the product in an environment where the temperature is lower than -10° C or higher than 45° C. If the ambient temperature is too high or too low, faults may occur.
4. Avoid contact with water or other liquids to avoid damage to the internal circuit of the product,
5. Do not disassemble, hit, squeeze the product, or throw the product into fire to avoid explosion. If the battery bulges or leaks, stop using it.
6. If the product will not be used for a long time, please charge the product once every three months to avoid battery over-discharge damage.
7. Stop using the product before cleaning or maintaining it. Please wipe the equipment with a dean, dry soft cloth for cleaning;
8. It is recommended to use a charger from a brand manufacturer with certification, with an output voltage of 5V. Please avoid using fast-charging chargers with output voltage exceeding 5V to avoid excessive charging damage.

|
---|---

Manufactured for Miniso Development
Hong Kong Limited, Flat/Rm 32, 11/F, Lee Ka
Industrial Building, 8 Ng Fong Street, San Po Kong KL, Hong Kong SAR.
Distributed by Miniso Depot CA Inc., 1050
Lakes Drive #260, West Covina, CA 91790, USA.
Miniso Trading Canada Inc., 5775
Yonge Street, Suite 520, Toronto, ON, M2M 4J1
MADE IN CHINA
www.miniso.com

Points de collecte sur www.quefairedemesdechets.fr EARPHONE
WIRELESS EARPHONE
ECOUTEURS SANS FIL
AURICULARES
INALAMBRICOS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>