MILE MARKER 95-32720 Spindle Nut Conversion Kit Instructions

September 17, 2024
MILE MARKER

MILE MARKER 95-32720 Spindle Nut Conversion

Stock Hub Removal

Remove all automatic hub components illustrated below starting with capscrews (listed as A).

NOTE: Use small pick to remove locking key from wheel retainer.

**DANA 44 AXLE 95-32720

**

**DANA 50 AXLE 95-32721

**

**DANA 60 AXLE 15002-01

**

Installation Instructions

  1. Install the inner locknut (nut with pin) and torque the nut to 50 ft. lb. while rotating the vehicle hub back and forth and using spanner lock nut wrench.
  2. Back off the inner lock nut then tighten to 30-40 ft. lb. while rotating hub back and forth.
  3. Back off locknut 90 degrees.
  4. Install the lock washer making sure the hole in the lockwasher lines up with the pin on the inner locknut.
  5. Now install the outer lock nut and tighten to 160-205 ft. lb. using spanner lock nut wrench.

CAUTION: Inner adjustment nut, lock washer and outer lock nut must be installed according to steps 1 through 5. Severe damage may occur!

MILE MARKER/SELECTRO HUBS Conversion Kits Limited Warranty

Mile Marker Industries warrants directly to the first purchaser that all Mile Marker Hub Part Numbers 427, 428, and all “Selectro Classic” models will be free from defect in material and workmanship appearing under normal use and service for a period of one year.
Warranty registration cards for each product must be submitted at the time of purchase or within 30 days by the end user. If you discover a hid- den defect, Mile Marker will, as its option, repair or replace the product or necessary replacement parts at no charge to you, provided you remove the product from the vehicle and return it prepaid to Mile Marker Industries. If the product was purchased in the United States, the owner must contact our warranty department to get a Return Goods Authorization (RGA) Number before returning the product. If the product was purchased outside the United States, the owner must return the product to the original place of purchase.

Customer Support

AUTOMATIC TO MANUAL SPINDLE NUT CONVERSION KIT INSTRUCTIONS

Part Number 95-32720, 95-32721,15002-01

2121 Blount Road, Pompano Beach, FL 33069
www.MileMarker.com
1.800.886.8647
©Copyright Mile Marker Industries

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals