PHILIPS BDP100 LED70 Pole Light Owner’s Manual

: September 16, 2024
: Philips

Table of Contents

BDP100 LED70 Pole Light
Specifications:
Product Usage Instructions:
Installation:
Maintenance:
Controls and Dimming:
Safety Instructions:
- Frequently Asked Questions (FAQ):
Q: Is the LED module replaceable in this luminaire?
Q: What is the warranty period for this product?
Q: Can this luminaire be dimmed?

BDP100 LED70 Pole Light

“`html

Specifications:

Product Name: TownGuide Performer BDP100
LED70/830 II DS PCF GR 62P
Light Source: LED module 7000 lm, 830 warm
white
Safety Class: II
Material: Polycarbonate bowl/cover
frosted
Color: Gray
Post-Top Diameter: 62 mm
Input Voltage: 220-240 V
Power Consumption: 56 W
IP Rating: IP66 (Dust penetration-protected,
jetproof)
Ingress Protection Code: IK10 (20 J
vandal-resistant)
Surge Protection Level: Up to 6 kV
differential mode and 6 kV common mode
Warranty: 5 years

Product Usage Instructions:

Installation:

Ensure the post-top diameter is 62 mm for proper fit.
Securely mount the luminaire using appropriate mounting
hardware.
Connect the luminaire to a power source with an input voltage
of 220-240V.

Maintenance:

Regularly clean the optical cover and housing to maintain
optimal performance. Check for any loose connections and tighten if
necessary.

Controls and Dimming:

The luminaire is not dimmable. It does not have constant light
output feature.

Safety Instructions:

Ensure the luminaire is installed by a qualified electrician. Do
not attempt to disassemble the luminaire while connected to
power.

Frequently Asked Questions (FAQ):

Q: Is the LED module replaceable in this luminaire?

A: Yes, the LED module in this luminaire is replaceable. Refer
to the datasheet for instructions on replacing the LED module.

Q: What is the warranty period for this product?

A: The warranty period for this product is 5 years from the date
of purchase.

Q: Can this luminaire be dimmed?

A: No, this luminaire is not dimmable.

“`

Lighting

TownGuide Performer

BDP100 LED70/830 II DS PCF GR 62P
BDP100 | TOWNGUIDE PERF FLAT CONE, LED70 | LED module 7000 lm, 830 warm white, Safety class II, Distribution symmetrical, Polycarbonate bowl/cover frosted, Gray, Post-top for diameter 62 mm
The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energyreduction programs. This includes LumiStep, DynaDimmer, and LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.

Product data
General Information Lamp family code

LED70 [LED module 7000 lm]

Light source replaceable Number of gear units

Datasheet, 2024, August 29

Yes 1 unit
data subject to change

TownGuide Performer

Driver included Light source engine type Service tag Product family code Lighting Technology Value ladder Serviceability class

Yes LED Yes BDP100 [TOWNGUIDE PERF FLAT CONE] LED Performance Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts

Light Technical Upward light output ratio Luminous Flux Standard tilt angle posttop Standard tilt angle side entry Luminous Efficacy (rated) (Nom) Correlated Color Temperature (Nom) Color rendering index (CRI) Light source color Optical cover type Luminaire light beam spread Optic type outdoor

3 3,780 lm 0° 68 lm/W 3000 K 80 830 warm white Polycarbonate bowl/cover frosted 75° Distribution symmetrical

Operating and Electrical

Input Voltage

220-240 V

Line Frequency

50 to 60 Hz

Inrush current

45 A

Inrush time

0.285 ms

Power Consumption

56 W

Power Factor (Fraction)

0.97

Connection

Screw connection block 5-pole

Cable

–

Number of products on MCB of 16 A type B 10

Temperature Ambient temperature range

-40 to +35 °C

Controls and Dimming Dimmable Driver/power unit/transformer Control interface Constant light output

No Power supply unit regulating No

Mechanical and Housing Housing Material Reflector material Optic material Optical cover material Fixation material Housing Color

Aluminum Acrylate Polycarbonate Steel Gray

Mounting device Optical cover shape Optical cover finish Overall length Overall width Overall height Overall diameter Effective projected area Dimensions (Height x Width x Depth)

Post-top for diameter 62 mm Conical flat Frosted 570 mm 570 mm 209 mm 570 mm 0.051 m² 209 x 570 x 570 mm

Approval and Application Ingress protection code
Mech. impact protection code Surge Protection (Common/Differential)
Sustainability rating Protection class IEC Flammability mark CE mark ENEC mark Warranty period EU RoHS compliant

IP66 [Dust penetration-protected, jetproof] IK10 [20 J vandal-resistant] Luminaire surge protection level until 6 kV differential mode and 6 kV common mode Lighting for circularity Safety class II Yes ENEC mark 5 years Yes

Initial Performance (IEC Compliant) Luminous flux tolerance Initial chromaticity Power consumption tolerance Init. Color Rendering Index Tolerance Standard Deviation of Colour Matching (McAdam ellipse)

+/-7% (0.43, 0.40) SDCM <5 +/-10% +/-2 SDCM5

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h

0.5 %

Control gear failure rate at median useful 5 %

life 50000 h

Control gear failure rate at median useful 10 %

life 100000 h

Lumen maintenance at median useful life* L96

50000 h

Lumen maintenance at median useful life* L91

100000 h

Application Conditions Performance ambient temperature Tq Maximum dim level

25 °C Not applicable

Product Data Order product name Full product name Full product code Order code

BDP100 LED70/830 II DS PCF GR 62P BDP100 LED70/830 II DS PCF GR 62P 871829190995800 910925866297

Datasheet, 2024, August 29

2

data subject to change

TownGuide Performer

Material Nr. (12NC) Numerator – Quantity Per Pack Net Weight (Piece) EAN/UPC – Product/Case
Dimensional drawing

910925866297 1 6.480 kg 8718291909958

Numerator – Packs per outer box EAN/UPC – Case

1 8718291909958

© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.

www.lighting.philips.com 2024, August 29 – data subject to change