PHILIPS WL140V LED12S CoreLine Wall Mounted Instructions
- September 18, 2024
- Philips
Table of Contents
WL140V LED12S CoreLine Wall Mounted
Product Information
Specifications
-
Product Name: CoreLine Wallmounted WL140V LED12S/840 PSU
WH -
Power: 12 W
-
Dimensions: D390 mm
-
Luminous Flux: 1350 lm
-
Color Temperature: 4000 K
-
IP Rating: IP65
-
Light Source: LED
-
Luminous Efficacy: 110 lm/W
-
Color Rendering Index (CRI): 80
-
Beam Angle: 120 degrees
-
Color: 840 neutral white
-
Operating Voltage: 220-240 V
-
Frequency: 50 or 60 Hz
Product Usage Instructions
Installation
-
Ensure the power source is switched off before
installation. -
Mount the CoreLine Wallmounted light fixture securely on a
suitable wall surface. -
Connect the power supply according to the provided wiring
diagram.
Controls and Dimming
The CoreLine Wallmounted light may be dimmable. Use a compatible
dimmable driver/power unit/transformer for dimming purposes.
Maintenance
To replace the light source, follow these steps:
-
Switch off the power supply to the fixture.
-
Remove the optical cover carefully to access the light
source. -
Replace the light source with a compatible one and reassemble
the fixture.
FAQ
Is the CoreLine Wallmounted light fixture suitable for outdoor
use?
Yes, the CoreLine Wallmounted fixture has an IP65 rating, making
it suitable for outdoor applications.
Can the CoreLine Wallmounted light be dimmed?
Yes, the CoreLine Wallmounted light may be dimmed using a
compatible dimmable driver/power unit/transformer.
What is the warranty period for the CoreLine Wallmounted
light?
The warranty period for the CoreLine Wallmounted light is not
specified in the manual. Please refer to the manufacturer’s
warranty information.
Lighting
CoreLine Wallmounted
WL140V LED12S/840 PSU WH
CoreLine Wall-mounted, 12 W, D390 mm, 1350 lm, 4000 K, IP65
CoreLine wall-mounted solutions deliver on the CoreLine promise of innovative,
easy-to install and high quality luminaires. These circular-shaped, surface-
mounted luminaires are suitable for both ceiling and wall installations and
are easy to apply in circulation areas such as corridors, hallways and
staircases. The modern, unobtrusive design, combined with a homogeneous light
distribution, ensures this luminaire will blend into the architecture of most
buildings. And thanks to the push-in connectors, installation of the CoreLine
WL140V is fast and straightforward. This family includes Interact ready
luminaires with integrated wireless communications, ready for use with
Interact gateways, sensors and software.
Product data
General Information Light source replaceable Number of gear units Driver
included Lighting Technology Value ladder
Light Technical Luminous Flux Luminous Efficacy (rated) (Nom) Saturated Red
(R9) Correlated Color Temperature (Nom) Color rendering index (CRI)
Yes 1 unit Yes LED Performance
1,350 lm 110 lm/W <50 4000 K >80
Flickering value (PstLM) – Flickering value as per 1
EN 61000-3-3
Stroboscopic effect visibility measure (SVM)
1.6
Beam angle of light source
120 degree(s)
Light source color
840 neutral white
Optic type
Symmetrical
Luminaire light beam spread
120° x 120°
Unified glare rating CEN
22
Total harmonic distortion
20 %
Operating and Electrical Input Voltage Line Frequency
220-240 V 50 or 60 Hz
Datasheet, 2024, August 30
data subject to change
CoreLine Wall-mounted
Initial CLO power consumption Average CLO power consumption Inrush current
Inrush time Power Consumption Power Factor (Fraction) Connection Cable Number
of products on MCB of 16 A type B
Temperature Ambient temperature range
Controls and Dimming Dimmable Driver/power unit/transformer Control interface
Constant light output
Mechanical and Housing Housing Material Reflector material Optic material
Optical cover material Fixation material Housing Color Optical cover finish
Overall height Overall diameter
Approval and Application Ingress protection code
Mech. impact protection code Sustainability rating Protection class IEC Glow-
wire test Flammability mark CE mark ENEC mark Warranty period Photobiological
risk
– W – W 14 A 0.007 ms 12 W 0.9 Push-in connector 6-pole 32
Photobiological risk specification EU RoHS compliant
Initial Performance (IEC Compliant) Luminous flux tolerance Initial
chromaticity Power consumption tolerance Standard Deviation of Colour Matching
(McAdam ellipse)
0.2 m Yes
+/-10% (0.3818,0.3797) SDCM <3 +/-10% SDCM3
-20 to +40 °C
No Power supply unit (On/Off) No
Polycarbonate Polycarbonate Polycarbonate Polycarbonate White Opal 85 mm 390
mm
IP65 [Dust penetration-protected, jetproof] IK10 [20 J vandal-resistant]
Safety class II Temperature 850 °C, duration 30 s Yes ENEC mark 5 years
Photobiological risk group 0 @200mm to EN62778
Over Time Performance (IEC Compliant)
Control gear failure rate at median useful life 5 %
50000 h
Lumen maintenance at median useful life*
–
35000 h
Lumen maintenance at median useful life*
80
50000 h
Lumen maintenance at median useful life*
–
75000 h
Lumen maintenance at median useful life*
–
100000 h
Application Conditions Performance ambient temperature Tq Maximum dim level Suitable for random switching
25 °C Not applicable No
Product Data Order product name Full product name Full product code Order code Material Nr. (12NC) Numerator – Quantity Per Pack Net Weight (Piece) EAN/UPC – Product/Case Numerator – Packs per outer box EAN/UPC – Case
WL140V LED12S/840 PSU WH WL140V LED12S/840 PSU WH 871951452872799 911401847482 911401847482 1 1.500 kg 8719514528727 6 8719514528888
Datasheet, 2024, August 30
2
data subject to change
85
CoreLine Wall-mounted
Dimensional drawing
Ø 390
65 222
240
31
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com 2024, August 30 – data subject to change