COMPASS CPS07164 Jump Starter Portable Power Bank Instruction Manual

: June 3, 2024
: COMPASS

Table of Contents

COMPASS CPS07164 Jump Starter Portable Power Bank
Instructions for use
Safety instructions
Product description
Technical data
JUMP START – emergency car start
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COMPASS CPS07164 Jump Starter Portable Power Bank

COMPASS-CPS07164-Jump-Starter-Portable-PRODUCT

Instructions for use

Power bank with car jump start function and LED indicators for displaying powerbank battery state. It is equipped with a lithium battery with a total capacityof20,000 mAh. Thanks to the JUMP START function, it allows you to start a vehicle with a battery that is discharged. It is to be connected directly to the car battery by clips. Vehicle with totally discharged battery cannot be started with this device. It is equipped with 2 USB connectors for charging a phone, tablet, camera, etc. The package includes a cable with USB-C / micro USB / mini USB / iPhone adapters. Another part of the package is a DC adapter for charging 12V devices up to 10A. The power bank is also equipped with LED flashlight. In order to use the charger safely and correctly, it is necessary to read this manual carefully before use.

Safety instructions

Forindooruseonly.
Do not open the charger nor shorten cables.
Never short-circuit the terminals (do not touch the terminals) -risk of short circuit.
When connecting to a car battery, never alter the polarity – always connect red clip to the(+) pole and the black clip to the(-) pole. If connected incorrectly, there is a risk of short circuit and damage to the product and the car battery!
If the charger body or cable is broken, the product cannot be used.
Risk of electric shock. – Observe work safety when using.
We recommend the use of goggles, gloves and protective clothing when handling car batteries.
In case of contact with the electrolyte, wash the affected area immediately with plenty of water and seek medical attention if necessary.
Check the functionality of the device before each use.
Protectthe device from moisture.
Keep the device out of the reach of children.
Make sure that children do not play with the appliance.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and/ or knowledge. These persons should only use the device under the supervision of an experienced person who will ensure their safety or provide them with instructions on how to use the device.
The battery on water (eg in on a boat) cannot be used with this product. Such batteries must be dismantled and must be charged on land!
Do not charge the product in humid conditions (rain, snow, high humidity). Do not use product in an explosive environment (dust, explosive gases or flammable substances).
Do not throw into fire- risk of explosion.
Do not insert foreign objects into any input or output connector – risk of short circuit and damage to the product.
When charging the product, make sure that the room is well ventilated.
Never use the JUMP START function on a frozen car battery.

Product description

COMPASS-CPS07164-Jump-Starter-Portable-FIG-1

Main switch
USB-C charging connector
2x USB outputs
Power button
12Vpoweroutput
Charge status lights
Connector/or JUMP START
LED flashlight
Cable with clips for JUMP START
Connector for 12V power supply
USB power supply cable
USB-C Charging cable
Adapterfor230V charging

Technical data

Buil-in battery 20.000 mAh
Charging 5 V =; 2.0 A
Charging adapters 230 V-
JUMP START function 12 V
Output current 1000 A
Peak current 2000 A (<0.5 sec.)
USB output 5V /2A· 9V /2A
Battery life 300 cycles ( at 80% state)
Working temperature -2o·c – + 10°c

JUMP START – emergency car start

Before using on a specific car, make sure (in the car documentation) that no further steps are required to start the car in an emergency. Never start the engine for more than 4 seconds with the device connected to the car battery. If you do not start the engine within 4 seconds, it is probably a different problem than a discharged car battery. When connecting to a car battery, never confuse the polarity- always the red terminal to the (+) pole and the black terminal to the(-) pole. If connected incorrectly, there is a risk of short circuit and damage to the product and the car battery!

Make sure that the power bank’s battery level is more than 25%.
Insert the clips cable into the power bank.
Connect the terminals on the car battery. Red at the (+) pole and black at the (-) pole.
Start the engine.
Disconnect the terminals from the car battery and then connector from the power bank.

Problem solving:
Nothing happens when turned on. The power bank is insufficiently charged, the low voltage protection is activated. Charge the power bank and try again. The power bank switches off when charging several electronic devices at the same time. Overload protection is activated. Charge the electronic devices separately, making sure thatthe total load of the Powerbank does not exceed 3.5A.

Disposal and recycling
Do not dispose of power tools and devices in the household waste! According to the European Directive 2012/19 / EC on Waste Electrical and Electronic Equipment (WEEE) and in enforcement of national law, used power tools must be collected separately and transported to an appropriate environmentally friendly recycling facility.

Power the device using a multifunctional USB cable

Turn on the main power switch.
Use a USB cable with the correct connector for your device. (never power multiple devices at once)
Plug the cable into one of the USB connectors on the power bank.
Connect the cable to your device that you want to charge.
Press the power button to start.

Power supply for 12V devices using adapter (12V socket)