cswid LK-M819-44 2.1CH Soundbar with Wired Subwoofer User Manual
- September 16, 2024
- cswid
Table of Contents
cswid LK-M819-44 2.1CH Soundbar with Wired Subwoofer
Product Information
Specifications
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC compliant for uncontrolled environment
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions
To ensure proper operation and compliance with FCC regulations, follow these guidelines:
Installation
- Place the device in a location that maintains a minimum distance of 20cm between the radiator and the body.
- Connect the device to a power outlet on a circuit different from nearby receivers to avoid interference.
- If needed, reorient or relocate the receiving antenna for optimal signal reception.
Operation
When using the device
- Avoid physical contact between the radiator and your body to maintain the recommended distance.
- If you experience interference, consult the user manual for troubleshooting tips or contact customer support.
Maintenance
Regularly inspect the device for any signs of damage or unauthorized
modifications. Do not alter the device without proper approval.
FAQ (Frequently Asked Questions)
Q: What should I do if I encounter interference while using the device?
A: If interference occurs, try repositioning the device, relocating the
antenna, or contacting customer support for assistance.
Important Safety Instructions
WARNING
To reduce the risk of electric shock, do not dismantle the product and do not
expose the product to rain or moisture.
No user-serviceable parts inside. Refer servicing to qualified personnel only.
- Read the user manual before use. Keep all instructions for future reference
- Always operate the product from a power source of the same voltage, frequency and rating as indicated on the rating label.
- This product is intended for indoor,household use only.
- To protect against electric shock: do not immerse unit, plug or cord in water or spray with liquids; do not place unit on windowsills or other places where it may be exposed to dripping or splashing of water; do not place vases or similar objects filled with liquids near the unit.
- Do not use this product in the immediate vicinity of water such as bathtubs, washbowls, swimming pools etc. where the likelihood of immersion or splashing occur.
- Keep the unit away from heat sources like radiators, heat registers, stoves or other products that produce heat. No open flame sources like candles should be placed on the unit.
- Use only with attachments/accessories specified by the manufacturer. Use of attachments/accessories not recommended can be hazardous.
- This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities,or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- This product is not a toy!Children should be supervised to ensure that they do not play with the appliance.
- Do not cover the unit during use. Do not impede ventilation by covering ventilation openings with cloths, curtains or similar items.
- Do not operate the product with a damaged cord or plug or if the product malfunctions, or is dropped or damaged in any manner.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard.
- For safety reasons, do not remove any covers or attempt to access the inside of the product.
- Do not clean the unit with any harsh chemicals as this might damage the finish. Wipe clean with a dry cloth.
- When removing the power plug from the wall outlet, always pull directly on the plug;never pull on the cord.
- Do not expose the batteries to excessive heat, direct sunlight, fire or similar.
- Do not throw used batteries in your household rubbish.Dispose of it responsibly according to local regulations.
Remote Control Description
Using the remote control:
-
POWER
Press this button to power on or power off. -
MODE
Press this button to switch the mode within Bluetooth, USB, Aux-in,HD-in(ARC- in). -
VOL+ Press VOL+ to up the volume of the soundbar
-
Under Bluetooth andUSB mode, press this button will go to previous song.
-
MOVIE
Press this button will enter MOVIE mode sound effect. -
PAIR
Under bluetooth mode, press this button will disconnect the connection between soundbar and sound sourcing device(such as your mobile phone), press this button will reconnect the previous sourcing device again. -
RESET
Press this button will resume the factory sound setting. -
MUTE
Under work mode, press this button to turn off sound of soundbar, press it again to turn on the sound. -
Under
Bluetooth and USB mode, press this button will go to next song. -
when playing music, press this button to pause playing, and repress to play continue
-
VOL-
press VOL- to down it. -
MUSIC
Press this button will enter MUSIC mode sound effect. -
NEWS
Press this button will enter NEWS mode sound effect. -
USB file loop.
Operating Instructions
After connecting to the Speaker, the display glows with prompt voice, which
means that successfully power on. Long press the Power/Mode button on
the side panel or the Mode key on the remote control to choose the required
mode.
Bluetooth Mode
- Press the”MODE”button repeatedly until Bluetooth Mode is selected.Display shows”BT”.
- On your Bluetooth-enabled device choose”LK-M819-44″ ,the name of the sound bar. The display blinks indicating that it is waiting for pairing, once pairing is successful, the indicator remains on, display shows “BT” and stop flashing.
- Now you can play music from your Bluetooth-enabled device on the sound bar.
Prass the button on the remote control to play the previous or next song.
Aux Input
If using the Aux cable connect the Speaker to audio equipment, select “AUX”by
using the Mode key on the remote control or the Power/Mode key on the side
panel. “AUX” will be displayed on the display accompanied by”AUX”voice prompt.
HDMI Input
If using HDMI cable connect Speaker to audio equipment, through the mode
button on the remote control or the Power/Mode key on the side plate to
select”HDn , screen displays”ARC”.
Front/Back panels
FRONT
-
.M
Press this button to power on or power off. -
when playing music, press this button to pause playing, and repress to play continue.
-
. Short press- for next song
Long press – for volume down. -
.
Short press+ for previous song
Long press + for volume up.
BACK
- AUX
- USB
- HD/ARC
- SW-OUT
Connection schematic
CONNECTING THE SOUNDBAR TO TV
-
Subwoofer to SW-OUT
-
Connection to lV: HDMI Input on the sound bar to HDfARC Output on lV
Note: Alternativel can use the AUX cable (included) to connect the ‘AUX-IN’ port on the sound barto the Auxiliary out or the Headphone Jack on the TV. -
AUX
After switching on the soundbar, change to AUX input mode Plug in the 3.5mm AUX cable to the AUX IN connector on the soundbar and start playing from the music device
CONNECTING THE SOUNDBAR TO OTliER DEVI ICES
Connection schematic
Soundbar: Under the TV(if wall-mounted)/in front of the TV
Subwoofer: on the floor, alongside the TV(or in the front comer of the
room)
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>