iBasso Audio CF01 TWS Bluetooth IEM Adapter User Manual

CF01 TWS Bluetooth IEM Adapter
User Manual

Name of Parts

First Use

1. Take out the right and left CF01 from the case. The L and R side of the CF01 will be paired automatically. The left side has a blue light that flashes slowly. while the right side has blue and red lights that flash alternatively. The CF01 is now in pairing mode.
2. On the smartphone or other device Bluetooth setting screen, turn on the Bluetooth. The CF01 R will be on the available devices list. Select the CF01R, the device will pair the CF01R. After that, the CFOlL will be paired automatically for Mere use.

Operation:

• Power On end Off
  When the CF01 is taken out of the case, it will be powered on. When the CF01 is placed into the case, it will be powered off.
  Pressing the power button for 3 seconds also can power on or power off the CF01.

• Pairing
  When taking the CF01 from the case, the CF01 will automatically connect to the paired device.

• Answer / Reject call
  Answering a call: When there Is a call. press the power button to answer the call. Rejecting a call: When there is a call, long-press the power button for 1 second to reject the call.

• Play/Pause
  When music is Owing press the power button to pause. When rtiLnk. is parsed. press the power button to resume.

• Activate Voice Assistant
  Alter the CF01 is paired to a smartphone, consecutively press the power button three times to activate the smartphone’s voice assistant.

• Previous/Next
  When playing music, double press the power button on the right side for the next song. Double pressing the power button of the left side will take you back to the previous song.

• Erase All Pairing Records
  In the shutdown state, long-press the power button for 8 seconds to erase all pairing records.

• Low Battery Indicator
  When the battery Is low, you can hear the “battery low” voice prompt every minute. At the same time, the red indicator flashes twice.

• Charge
  When the CF01 1WS adapters batteries are low, place them into the case for charging.
  They take about 1.5 hours to get a full charge.
  When they are charging, both the imer and the outer indicator turns red.
  When the charge case’s battery is low. Use the USB cable with a 5V US5 charger to charge it. It takes about 2.5 hours for a full charge.
  When it Is charging, both the inner and the outer Indicators will flash.
  When the charge is completed, the indicators tom off. The charging case supports wireless charging. You can place them on a wireless charger for charging.
  The CF01 adapter has 4.5 hours of playtime, the charging case can provide an extra 20 hours.

Technical Specifications

MMCX Connection Instructions

First, Pearce Cheek to Make site you have the correct adapter for the left and right monitors. When the printing is facing up as sham in the picture, you will have a Clear Indication of the (Wit am lett connection that will be made for your IEM| MMCX oCeln
OtIOrk Notice how the connection netts and pushes sheens in. Please push but do not force the connector. You will feel a slight click In the MMCX socket when the prow connection is made.| To retrieve the MMCX connClin:
Please do not pull on the MMCX to incorrect from the IEM, but gently %sedge between the CF01 MMCX and the shell of the monitor. When doing Ms die WMCX will separate from the connection with little effort You can use fingernail ore mall fiat tool for this purpose.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet and a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>