Kraenzle 111029-KR01-001 Hd High Pressure Cleaners
Please be aware that the spare part list is part of the user manual. Keep both
leaflets for later use or any subsequent owners.
Technical Data
Technical Data| therm 640 therm 640
without hose drum with hose drum
---|---
Operating press. fully adjustable| 30-150 bar / 3-15 MPa| 30-150 bar / 3-15
MPa
Nozzle size| D25045| D25045
Permissible overpressure| 145 bar/ 14,5 MPa| 145 bar/ 14,5 MPa
Water output| 635 l/h| 635 l/h
Heating oil pressure| 1,35 Gph-10 bar| 1,35 Gph-10 bar
Heating oil consumption heating capacity (max.)| 4,8 kg/h = 5,7 l/h| 4,8 kg/h
= 5,7 l/h
heating capacity| 50 kW| 50 kW
Fuel tank| 25 l| 25 l
Hot water output temperature (water supply 12 °C)| max. 80°| max. 80°
Steamlevel| max. 140 °C| max. 140 °C
Suction height| 2.5 m| 2.5 m
Hose drum| no| yes
Steel braided high-pressure hose| 10 m| 20 m
Connected load| 220 V 1 ~, 15 A, 60 Hz| 220 V 1 ~, 15 A, 60 Hz
Power input| P 1 – 3,4 kW| P 1 – 3,4 kW
Power output| P 2 – 2,3 kW| P 2 – 2,3 kW
Weight| 197 kg| 205 kg
Dim. in mm| 1050 x 800 x 1050| 1050 x 800 x 1350
Acoustic level LpA| 84 dB (A)| 84 dB (A)
Acoustic power LWA| 88 dB (A)| 88 dB (A)
Recoil at lance| approx. 20 N| approx. 20 N
Vibration at lance| 2,0 m/s2| 2,0 m/s2
Wiring diagram
Pipeline plan
Safety valve No. 5 must be set approx. 15% higher than the unloader valve on
the high-pressure pump.
- Float valve, water inlet
- Water tank
- Detergent valve
- high-pressure pump with integrated unloader valve
- Flow-Safety-Block with the integrated safety valve for heating coil and flow monitoring device
- By-Pass line
- Fuel pump with solenoid valve
- Fuel filter
- Fuel tank
Spare parts list complete assembly
| Position No |
Description |
Qty |
Item No. |
| 13 |
Fuel Cap with O-Ring |
1 |
44.270 0 |
| 19 |
Starlock Cap 20 mm |
4 |
40.142 |
| 20 |
O-Ring 53.34 x 5.33 |
1 |
44.271 0 |
| 21 |
Hex Socket Screw M8 x 12 |
2 |
40.122 |
| 22 |
Hex Socket Screw M8 x 40 |
2 |
44.033 |
| 23 |
Washer 8.4 DIN 9021 |
4 |
41.409 |
| 24 |
Screw 3.9 x 16 |
4 |
12.150 |
| 26 |
Starlock Cap 8 mm |
1 |
44.165 |
| 27 |
Carriage Bolt M8 x 35 |
2 |
41.408 |
| 28 |
Drain Plug Fuel Tank |
1 |
44.004 1 |
| 30 |
Elastic Stop Nut M8 |
2 |
41.410 |
| 31 |
Gasket for Drain Plug |
1 |
41.047 1 |
| 32 |
Power Supply Cord with Plug 5.75m, 3×1.5 mm², H07RNF |
1 |
41.092 |
| 33 |
Plastic Screw 6 x 30 |
8 |
43.423 1 |
| 34 |
Fuel Filter |
1 |
44.269 0 |
| 36 |
Screw DIN912-A2 M8 x 20 |
4 |
41.480 |
| 37 |
High-Pressure Hose NW 8 10 m |
1 |
41.081 |
| 37.1 |
High-Pressure Hose NW 8 20 m |
1 |
44.381 2 |
| 38 |
O-Ring 9.3 x 2.4 Viton |
2 |
13.273 1 |
| 40 |
Lance with Flat Spray Nozzle 25045 |
1 |
12.420-D25045 |
| 44 |
Hex Socket Screw M8 x 12 |
2 |
40.122 |
Spare parts list switch box
| Position No |
Description |
Qty |
Item No. |
| 1 |
Electrical Box |
1 |
44.807 1 |
| 2 |
Cover for Electrical Box Therm 640 |
1 |
47.014 1-640 |
| 3 |
Front Plate for Manometer |
1 |
44.375 1 |
| 5 |
Screw 5 x 25 |
10 |
41.414 1 |
| 6 |
Mount for Switch |
1 |
44.810 |
| 7 |
Screw 5.0 x 14 |
10 |
43.426 |
| 8 |
Mount for Thermostat |
1 |
47.012 |
| 9 |
Gasket for Thermostat |
1 |
47.013 |
| 10 |
Gasket for Switch |
1 |
44.817 |
| 13 |
Gasket for Overheat Protection Cover |
1 |
44.182 1 |
| 14 |
Control Unit for Circuit Board |
1 |
44.257 |
| 15 |
Cover for Overheat Protection Trigger |
1 |
44.361 |
| 16 |
Circuit Board for Overheat Protection |
1 |
44.370 |
| 17 |
Screw 3.5 x 8 |
3 |
43.430 |
| 18 |
Screw 4.0 x 16 |
8 |
43.417 |
| 21 |
Washer 4.3 DIN9021 |
3 |
43.472 |
| 22 |
Circuit Board 230 V / 50/60 Hz |
1 |
44.359 1 |
| 23 |
Contactor 230 V / 50/60 Hz |
1 |
46.005 |
| 24 |
Screw 4.0 x 25 with Integrated Washer |
2 |
43.425 |
| 25.1 |
Overcurrent Protector 15A, 1-pole |
1 |
46.041 |
| 26 |
Cable Grommet with Strain Relief |
1 |
44.819 |
| 27 |
Strain Relief Clamp |
1 |
43.431 |
| 28 |
Screw 3.5 x 14 |
5 |
44.525 |
| 29.1 |
Power Supply Cord with Plug 5.75m, 3×1.5 mm², H07RNF |
1 |
41.092 |
| 30 |
PG16 Cable Gland 1 Conductor |
2 |
41.419 1 |
| 31 |
PG16 Cable Gland 2 Conductors |
3 |
44.132 |
| 32 |
PG16 Cable Gland 3 Conductors |
1 |
44.133 |
| 34 |
Fuel Manometer |
1 |
44.362 0 |
| 35 |
Connector R1/4″ IG-DN6 Angle |
1 |
44.409 |
| 36 |
Sealing Ring 8.3 x 11.3 x 2 |
3 |
13.275 1 |
| 37 |
Fuse 1.25 A Slow-Blow |
1 |
44.676 |
| 38 |
Fuse 3.14 A Slow-Blow |
1 |
44.166 3 |
| 39 |
Fuse 630 mA Slow-Blow |
1 |
44.200 2 |
| 40 |
Retaining Bracket |
1 |
44.352 |
| 41 |
Screw M5 x 10 |
2 |
43.021 |
| 42 |
Fuse 32 mA Slow-Blow |
1 |
44.200 1 |
| 45 |
Grommet for Capillary Tube |
2 |
44.823 |
| 47 |
Gasket for Electrical Box |
1 |
44.838 |
| 48 |
Clamp for Manometer |
1 |
44.049 |
| 49 |
Connector Muff for Manometer |
1 |
44.136 |
| 50 |
Cover for Electrical Box |
1 |
47.015 |
| 51 |
Hose Clamp 9 – 9 |
2 |
44.054 |
| 52 |
Hose for Detergent Intake |
1 |
44.055 |
| 53 |
Hose with Filter and Non-Return Valve |
1 |
44.056 1 |
| 54 |
Non-Return Valve for Detergent Intake |
1 |
44.240 1 |
| 55 |
Pressure Measuring Line |
1 |
44.102 1 |
Spare parts list water supply
| Position No |
Description |
Qty |
Item No. |
Spare parts list water supply| | |
---|---|---|---
| 5 |
Connector Piece R 3/8″ IG |
1 |
41.423 |
| 9 |
O-Ring 13 x 2.6 |
2 |
15.017 |
| 10 |
Clamping Ring |
3 |
44.026 1 |
| 13 |
Water Inlet Hose |
1 |
44.028 |
| 16 |
HD Hose Water Outlet |
1 |
44.840 2 |
| 17 |
Retaining Washer |
1 |
44.841 |
| 18 |
Screw DIN912 M5 x 12 |
2 |
41.019 4 |
| 20 |
Water Outlet Part |
1 |
13.368 |
| 25 |
Sealing Screw |
1 |
44.009 1 |
| 30 |
Cleaning Agent Valve Complete |
1 |
46.616 |
| 31 |
Base Part Angle Valve |
1 |
46.608 |
| 40 |
Suction Tap M10 x 1 |
1 |
46.605 |
| 42 |
Plastic Hose for Detergent Suction |
1 |
44.055 |
| 43 |
Plastic Hose with Filter |
1 |
44.056 1 |
Spare parts list fuel supply
| Position No |
Description |
Qty |
Item No. |
| 1 |
Fuel Supply Cover |
1 |
44.011 |
| 2 |
Flange with Fuel Lines |
1 |
44.010 1 |
| 4 |
PA Hose DN6 0.22 m |
1 |
44.403 |
| 7 |
Fuel Line to Pump |
1 |
44.108 1 |
| 8 |
PA Hose DN6 0.84 m |
1 |
44.403 |
| 9 |
PA Hose DN6 0.32 m |
1 |
44.403 |
| 10 |
Connector Elbow 1/4″ x 6 |
2 |
44.405 |
| 11 |
Screw 5.0 x 25 |
3 |
41.414 1 |
| 12 |
Connector Stub 1/8″ x 6 |
2 |
44.407 |
| 13 |
Ermeto Fitting R1/8″ x 6L |
2 |
44.372 |
| 14 |
Connector Elbow 1/8″ x 6 |
1 |
44.408 |
| 16 |
Connector Part for Fuel Filter |
2 |
44.214 |
| 17 |
Rubber Gasket 3/4″ |
2 |
41.047 1 |
| 19 |
O-Ring 38 x 4 |
1 |
13.303 1 |
| 20 |
Screen Body for Fuel Filter |
1 |
44.213 |
| 22 |
Screw-in Elbow R1/4″ AG x 10L |
2 |
40.121 1 |
| 23 |
Fuel Pump with Solenoid Valve |
1 |
44.073 |
| 24 |
PA Hose DN6 0.93 m |
1 |
44.403 |
| 25 |
Coil for Solenoid Valve |
1 |
44.251 1 |
| 26 |
Solenoid Valve |
1 |
44.251 |
| 27 |
Spacer Tube 128 mm |
1 |
44.084 |
| 40 |
Fuel Pump Complete |
1 |
44.371 |
| 41 |
Fuel Filter Complete |
1 |
44.391 |
Spare parts list firebox
| Position No |
Description |
Qty |
Item No. |
| 1 |
Mounting Bracket for Ignition Transformer with Pos. 2 and 10 |
1 |
44.821 |
| 2 |
Support Bracket |
1 |
44.395 |
| 3 |
Ignition Transformer |
1 |
44.074 2 |
| 4 |
Screw M 5 x 50 |
2 |
44.113 |
| 5 |
High-Voltage Ignition Cable |
2 |
44.114 |
| 7 |
Ring Nut M 8 DIN 582 |
3 |
44.115 |
| 8 |
Spring Washer A 8 |
5 |
44.222 |
| 9 |
Stainless Steel Nut M 8 |
2 |
14.127 2 |
| 10 |
Ignition Cable Mounting Base |
1 |
44.369 |
| 11 |
Fuel Line “Nozzle Holder” 115mm |
1 |
44.089 1 |
| 12 |
Elbow Fitting 6L x 6L |
1 |
44.106 |
| 13 |
Fuel Line to Pump |
1 |
44.108 1 |
| 14 |
Stainless Steel Screw M 6 x 10 |
3 |
44.177 |
| 16 |
Sheet Metal Screw 6.3 x 13 |
7 |
44.109 |
| 17 |
Washer A 10.5 DIN 9021 |
3 |
50.182 |
| 18 |
Hexagon Screw M 10 x 20 DIN 933 |
3 |
44.116 |
| 19 |
Pressure Measuring Line |
1 |
44.102 1 |
| 20 |
Blower Connection |
1 |
44.068 |
| 21 |
Blower Housing |
1 |
44.353 |
| 24 |
Burner Motor 200-240 V / 50/60 Hz |
1 |
44.072 6 |
| 25 |
Plug-in Coupling (from 10/2021) |
1 |
44.852 2 |
| 28 |
Screw 5.0 x 14 |
2 |
43.426 |
| 29 |
Screw M 5 x 12 |
1 |
40.134 |
| 30 |
Screw 5.0 x 25 |
9 |
41.414 1 |
| 31 |
Toothed Washer 4.3 |
4 |
43.471 |
| 32 |
Screw M 4 x 8 |
5 |
44.216 |
| 33 |
Set Screw M 6 x 8 DIN 914 |
2 |
44.090 |
| 39 |
HD Hose Water Outlet |
1 |
44.840 |
| 40 |
Temperature Sensor |
1 |
44.954 1 |
| 41 |
Ermeto Nut 12 mm |
2 |
40.075 |
| 42 |
T-Screw Fitting |
1 |
44.173 |
| 43 |
Screw-in Elbow Fitting 3/8″ x 12L |
1 |
44.092 |
| 44 |
High-Pressure Hose |
1 |
44.093 |
| 45 |
Clamping Ring for Measuring Line Thermostat |
1 |
44.087 1 |
| 46 |
Measuring Line Thermostat |
1 |
44.101 2 |
| 48 |
Cutting Ring 12 mm |
1 |
40.074 |
| 49 |
Union Nut for Ermeto 12 mm |
1 |
40.075 |
| 52 |
Set Screw M 6 x 8 DIN 914 |
2 |
44.090 |
| 53 |
Sheet Metal Screw 4.8 x 9.5 |
4 |
44.564 |
| 53.1 |
Sheet Metal Screw 4.8 x 13 |
2 |
44.112 |
| 54 |
Over-Temperature Sensor |
1 |
44.388 |
| 57 |
Knob for Air Slider |
1 |
44.358 |
| 59 |
Support for Air Adjustment |
1 |
44.356 |
| 60 |
Shaft for Air Adjustment |
1 |
44.382 |
| 61 |
Gear Drive for Air Slider |
1 |
44.357 |
| 62 |
Screw 3.5 x 14 |
1 |
44.525 |
| 82 |
Blower Unit |
1 |
44.390 1 |
Spare parts list flow-safety-block
| Position No |
Description |
Qty |
Item No. |
| 1 |
Outer Shell with Base Plate |
1 |
44.063 |
| 2 |
Nozzle Holder Cover |
1 |
44.079 |
| 3 |
Inner Shell with Bottom Plate |
1 |
44.378 |
| 5 |
Inner Cover with Flame Tube |
1 |
44.377 |
| 7 |
Fuel Nozzle 60° B 1.25 gph |
1 |
44.077 1 |
| 8 |
Block Electrode |
1 |
44.080 |
| 9 |
Nozzle Holder Ø 25 mm, 6 Slots |
1 |
44.076 4 |
| 10 |
Nozzle Holder |
1 |
44.078 |
| 11 |
Stainless Steel Screw M6 x 10 |
3 |
44.177 |
| 12 |
Clamping Plate for Electrode |
1 |
44.076 1 |
| 13 |
Cylindrical Screw with Hex Socket M5 x 15 DIN6912 |
1 |
44.076 2 |
| 15 |
Spacer Sleeve |
2 |
44.376 |
| 19 |
Stainless Steel Nut M8 |
7 |
14.127 2 |
| 20 |
Spring Washer A8 |
7 |
44.222 |
| 21 |
Optical Flame Sensor |
1 |
44.256 1 |
| 22 |
Screw M4 x 10 |
4 |
46.002 |
| 27 |
Insulation Plate |
1 |
44.360 |
| Inner Chamber Complete (Pos. 3, 5, 15, 19, 20, 25, 27)| 1| 44.399
---|---|---|---
Spare parts list unloader v./ pressure s.
| Position No |
Description |
Qty |
Item No. |
| 80 |
Complete Control Piston with Handwheel |
1 |
40.490 |
| 81 |
Repair Kit for Pressure Switch Mechanism |
3 |
15.009 |
| 82 |
Pressure Switch (Red) without Mechanism |
1 |
44.389 |
| 83 |
Valve Housing Complete without E-Switch |
1 |
44.470 |
| 84 |
Repair Kit for Pressure Switch Mechanism 3/8″ AG |
2 |
15.011 |
| 85 |
Pressure Switch (Black) without Mechanism |
1 |
44.389 |
| 86 |
Pressure Switch (Red) with Mechanism (Pos. 81 + 82) |
2 |
44.389 |
| 87 |
Pressure Switch (Black) with Mechanism (Pos. 84 + 85) |
3 |
44.389 |
| Position No |
Description |
Qty |
Item No. |
| --- |
--- |
--- |
--- |
| 5.1 |
O-Ring 13.94 x 2.62 |
1 |
42.167 |
| 8 |
O-Ring 11 x 1.44 |
1 |
12.256 |
| 9 |
Stainless Steel Seat |
1 |
14.118 |
| 10 |
Retaining Ring |
1 |
13.147 |
| 11 |
Stainless Steel Ball 8.5 mm |
1 |
12.245 |
| 12 |
Stainless Steel Spring |
1 |
14.119 |
| 13 |
Sealing Screw |
1 |
14.113 |
| 14 |
Control Piston |
1 |
14.134 |
| 18 |
Piston Guide (special) |
1 |
42.105 |
| 20 |
Valve Spring (black) |
1 |
14.125 |
| 21 |
Spring Pressure Washer |
1 |
14.126 |
| 22 |
Needle Bearing |
1 |
14.146 |
| 23 |
Handwheel for AM-Pump |
1 |
40.457 |
| 24 |
Cap for Handwheel AM-Pump |
1 |
40.458 |
| 25 |
Elastic Stop Nut |
1 |
14.152 |
| 27 |
Outlet Part R1/4″ AG |
1 |
15.011 |
| 49 |
O-Ring 3.3 x 2.4 |
1 |
12.136 |
| 50 |
O-Ring 5 x 1.5 |
1 |
15.014 |
| 51 |
Guide Part Control Tappet |
1 |
49.058 0 |
| 52 |
O-Ring 13 x 2.6 |
2 |
15.017 |
| 53 |
O-Ring 14 x 2 |
1 |
43.445 |
| 54 |
Parbak 4 mm |
2 |
12.136 2 |
| 55 |
Support Washer dm 5 |
1 |
15.015 |
| 55.1 |
Support Washer dm 4 |
2 |
15.015 1 |
| 56.1 |
Stainless Steel Spring 1.8 x 9.1 x 18.5 |
1 |
15.016 |
| 57 |
Long Control Tappet |
1 |
15.010 2 |
| 59 |
Plug M10x1 (bored through) |
1 |
13.385 1 |
| 60 |
Housing for Electric Switch (black) |
2 |
15.204 |
| 60.1 |
Housing for Electric Switch (red) |
1 |
15.205 |
| 63 |
Fitting PG 11 |
2 |
15.203 |
| 64 |
Cable 2 x 1.0 mm² 0.70 m (black) |
1 |
44.367 |
| 64.1 |
Cable 2 x 1.0 mm² 0.70 m (gray) |
1 |
44.368 |
| 65 |
Sheet Metal Screw 2.9 x 19 |
12 |
15.024 |
| 66 |
Cover for Electric Switch (black) |
1 |
15.201 |
| 66.1 |
Cover for Electric Switch (red) |
1 |
15.201 1 |
| 67 |
O-Ring 44 x 2.5 |
2 |
15.023 |
| 69 |
Cylinder Head Screw M4 x 20 |
4 |
15.025 |
| 72 |
Compression Spring 1 x 8.6 x 30 |
1 |
40.520 |
| 73 |
Base Part for Electric Switch |
1 |
15.009 |
| 74 |
Control Piston |
1 |
15.010 |
Spare parts list valve housing
| Position No |
Description |
Qty |
Item No. |
| 1 |
Valve Housing AM-Pump |
1 |
40.451 1 |
| 3 |
Valve (green) for APG-Pump |
6 |
41.715 1 |
| 7 |
Hex Socket Screw M10 x 35 |
4 |
42.509 1 |
| 8 |
Suction Hose with Elbow and Union Nut |
1 |
44.469 |
| 12 |
Sealing Screw 3/8“ |
1 |
40.018 |
| 13 |
Sleeve 18 x 26 x 4/2 |
3 |
41.013 2 |
| 14 |
Backup Ring 18 mm |
6 |
41.014 2 |
| 16 |
Leakage Ring 18 mm |
3 |
41.066 |
| 18 |
Woven Sleeve 18 x 26 x 5.5/3 |
3 |
41.013 1 |
| 19 |
Suction Connector Hose Connection |
1 |
44.189 |
| 20 |
Spacer Ring 18 mm |
3 |
41.015 2 |
| 22 |
Elbow Fitting 3/4‘‘ IG x ø14.5 |
1 |
44.457 |
| 23 |
Pressure Ring |
3 |
41.018 |
| 24 |
Suction Connection 3/8“ AG x 3/4“ AG |
1 |
44.471 |
| 25 |
O-Ring 11 x 1.5 |
1 |
12.256 |
| 26 |
Stainless Steel Seat Ø7 |
1 |
14.118 |
| 27 |
Retaining Ring |
1 |
13.147 |
| 28 |
Pump Outlet Part R1/4” x 12L |
1 |
44.394 |
| 32 |
Sealing Plug M 8 x 1 |
2 |
13.158 |
| 33 |
Outlet Closure Piece |
1 |
40.522 |
| 34 |
Stainless Steel Ball Ø10 |
1 |
12.122 |
| 35 |
Return Spring “K” |
1 |
14.120 1 |
| 37 |
O-Ring 18 x 2 |
1 |
40.016 |
| Repair Kit Valves (6x Pos. 2; 6x Pos. 3; 6x Pos. 4)| 1| 41.748
---|---|---|---
| Repair Kit Sleeves 18 mm (3x Pos. 13; 6x Pos. 14; 3x Pos. 15; 3x Pos. 23; 3x
Pos. 18)| 1| 41.049
---|---|---|---
Spare parts list transmission
| Position No |
Description |
Qty |
Item No. |
| 1 |
Oil Housing with Oil Seals |
1 |
40.452 |
| 4 |
Hex Socket Screw M8 x 25 |
6 |
40.053 |
| 7 |
Oil Seal 18 x 28 x 7 |
3 |
41.031 |
| 9 |
Axial Roller Cage |
1 |
40.040 |
| 11 |
Swash Plate 7.66° |
1 |
40.460-7,66 |
| 12 |
Plunger Spring |
3 |
40.453 |
| 13 |
Spring Pressure Washer |
3 |
40.454 |
| 14 |
Plunger 18mm (AM-Pump) |
3 |
40.455 |
| 15 |
Retaining Ring |
3 |
41.035 |
| 16 |
O-Ring 14 x 2 |
2 |
43.445 |
| 17 |
Sealing Screw M18 x 1.5 |
1 |
41.011 |
| 18 |
Flat Gasket |
1 |
41.019 3 |
| 20 |
Hex Socket Screw M5 x 12 |
4 |
41.019 4 |
| 21 |
Oil Dipstick (AM-Pump) |
1 |
40.461 |
| 23 |
Oil Drain Hose |
1 |
44.128 1 |
| Oil Housing AM Complete (Pos. 1, 4-7, 12-17)| 1| 40.452 1
---|---|---|---
Spare parts list motor
| Position No |
Description |
Qty |
Item No. |
| 1 |
Stator BG100 2.3kW 220V / 60Hz |
1 |
40.720 1 |
| 2 |
A-Bearing Flange |
1 |
40.700 |
| 3 |
Rotor BG100 220-230V / 50/60Hz |
1 |
40.703 1 |
| 4 |
Fan Wheel BG100 |
1 |
40.702 1 |
| 5 |
Fan Cover BG100 |
1 |
40.701 |
| 8 |
Terminal Block 2.5 mm² 4-pole |
1 |
43.031 1 |
| 9 |
PG Gland PG 13.5 |
1 |
40.539 |
| 10 |
Angular Contact Ball Bearing 7306 |
1 |
40.704 |
| 11 |
Oil Seal 35 x 47 x 7 |
1 |
40.080 |
| 12 |
Key 8 x 7 x 28 |
1 |
40.459 |
| 13 |
Ball Bearing 6206 – 2Z |
1 |
40.538 |
| 14 |
Hex Socket Screw M6 x 30 |
4 |
43.037 |
| 15 |
Tolerance Sleeve |
1 |
40.544 1 |
| 16 |
Sheet Metal Screw 2.9 x 16 |
1 |
43.036 |
| 19 |
Screw M4 x 12 |
4 |
41.489 |
| 21 |
Screw M4 x 12 |
4 |
41.489 |
| 22 |
Grounding Screw Complete |
1 |
43.038 |
| 25 |
Unit Mounting Bracket |
1 |
44.013 |
| 26 |
Vibration Mount 30×30 |
4 |
44.227 |
| 27 |
Washer Ø8.4 DIN 9021 |
7 |
41.409 |
| 28 |
Hex Socket Screw M8 x 40 |
3 |
43.059 |
| 29 |
Rubber Buffer 15×20 |
2 |
43.419 2 |
Spare parts list gun with lance
| Position No |
Description |
Qty |
Item No. |
| 1 |
Plug-in Coupling D12 |
1 |
13457 |
| 2 |
Trigger Lever Complete |
1 |
12509 |
| 3 |
O-Ring 11.5 x 3.5 |
1 |
134601 |
| 4 |
Gun Shell Right, Left |
1 |
12508 |
| 5 |
Cylinder Pin 3 x 21 |
1 |
12253 |
| 6 |
Repair Kit Starlet 3 |
1 |
12510 |
| 7 |
Plastic Screw 3.5 x 14 |
8 |
44525 |
| 19 |
Plug-in Nipple D12 |
1 |
13470 |
| 20 |
Pipe 1000 mm both ends R1/4” |
1 |
13519 |
| 21 |
Grip Shells Right, Left |
1 |
12406 |
| 22 |
Screw 3.5 x 14 |
6 |
44525 |
| 25 |
Flat Spray Nozzle 25045 |
1 |
D25045 |
| Starlet 3| 1| 12500
---|---|---|---
| Lance with Flat Spray Nozzle 25045| 1| 12420-D25045
---|---|---|---
Spare parts list hose drum
| Position No |
Description |
Qty |
Item No. |
| 1 |
Side Shell Hose Guide |
1 |
40.302 |
| 2 |
Side Shell Water Guide |
1 |
40.301 |
| 3 |
Drum Bottom Part |
1 |
40.304 |
| 5 |
Hex Socket Screw M4 x 25 |
4 |
40.313 |
| 6 |
Bearing Block with Brake |
1 |
40.327 |
| 7 |
Bearing Block Left |
1 |
40.305 |
| 8 |
Clamping Piece |
2 |
40.307 |
| 9 |
Plastic Screw 5.0 x 20 |
12 |
43.018 |
| 11 |
Water Guide Shaft |
1 |
40.323 |
| 12 |
Elastic Stop Nut M4 |
4 |
40.111 |
| 13 |
Crank Complete |
1 |
40.320 0 |
| 16 |
Shaft Retaining Ring 22 mm |
2 |
40.117 |
| 19 |
Locking Washer |
1 |
40.325 |
| 20 |
Sealing Kit |
1 |
13.410 1 |
| 22 |
Screw M5 x 10 |
1 |
43.021 |
| 23 |
Ermeto Elbow R1/4″ AG x 12L |
1 |
44.864 |
| 35 |
Mounting Bracket |
1 |
44.143 |
| 36 |
Rubber Stopper |
2 |
42.613 |
| 37 |
Carriage Bolt M8 x 40 |
2 |
44.159 |
| 38 |
Elastic Stop Nut M8 |
2 |
41.410 |
| 42 |
O-Ring 9.3 x 2.4 |
1 |
13.273 |
| 44 |
Connection Hose NW 8, 1 m |
1 |
44.385 |
| 45 |
High-Pressure Hose NW 8, 20 m |
1 |
44.381 2 |
| 60 |
Hose Drum Complete (without Hose, without Mounting Bracket) |
1 |
44.392 |
| 61 |
Mounting Bracket Complete (consisting of Pos. 35-38) |
1 |
44.143 |
Spare parts list water filter
| Position No |
Description |
Qty |
Item No. |
| 4 |
O-Ring 40 x 3.5 |
1 |
13.303 |
| 10 |
O-Ring 13 x 2.6 |
1 |
13.272 |
| Complete Filter (Pos. 1 – 11)| 1| 13.310
---|---|---|---
Notes
Josef Kränzle GmbH & Co. KG
Rudolf-Diesel-Straße 20
89257 Illertissen (Germany)
vertrieb@kraenzle.com
Read User Manual Online (PDF format) >>
Download this manual >>
