Weijie 2BKP3-V3 Smart Projector User Manual
- September 15, 2024
- Weijie
Table of Contents
Weijie 2BKP3-V3 Smart Projector User Manual
Safety Warning
To avoid dangerous or illegal operations, please read the following precautions carefully before using this device.
To provide the device with a stable power supply, select the power supply line that conforms to the national electricity standard and the power sockets for which protective measures are taken, such as grounding.
Use the type of power supply indicated on the device.
Do not unpack and disassemble the machine by yourself, otherwise, we will not undertake any free warranty service.
To avoid eye injury, do not look directly at the projector lens when this device is working.
Do not place the device on any items that may block the ventilation openings, such as cloth, blankets, etc.
Since this device is not waterproof, avoid getting wet or splashing, and do not place any item containing liquid next to the device, such as vases, water cups, etc.
Do not expose the device to rain or water to prevent electric shock.
Unplug the power cord if the device will not be used for a long time.
Transport the device with the original foam.
Do not try to repair the device by yourself, please contact the dealer if required.
Use the product in an environment within a temperature of 5°-35°, and do not use in a place over 2,000 meters at sea level.
Statement
- Intellectual property right statement: The hardware design and software of this product are covered by the patents. Anyone who reproduces this product or the content of the instruction without the authorization of the Company shall assume legal liabilities.
- This manual is for reference only, and the actual function of the final product is subject to the actual function of the product received by the customer.
- The picture is for reference only, please refer to the actual product. The company reserves the right to improve and change the appearance and design of the product without notice.
Accompanying Accessories
- Remote control x 1
- Adapter×1
- Power cord×1
Appearance
Note: To avoid damage to the eyes, do not look at the lens directly after turning on.
Projection
Smart Projector
Remote Control
Note:
The remote control supports two modes: infrared mode and Bluetooth mode.
Infrared mode is the standard mode before the remote control pair.
Please pair the remote control to the projector when first use.
The following are the steps of Bluetooth remote control connection:
-
Enter projector Bluetooth Settings.
-
Insert the battery in the remote control, press and hold the “VOL +” and“VOL -” keys at the same time for more than 3 seconds, when the remote control indicator light flashes, release the pairing combination key .
-
Select the device named Smart Remote from the Bluetooth device pairing list, click Connect, and complete the Bluetooth remote control connection.
This step must be completed within 30 seconds. -
When the remote control is paired successfully, the remote control indicator light flashes slowly 2 times and then goes out.
*The advantage of Bluetooth mode compared to infrared mode is no limitation by the receiving angle and has a long receiving distance.
NOTICE: The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Content owners use Microsoft Play Ready TM content access technology to protect their intellectual property, including copyrighted content. This device uses Play Ready technology to access Play Ready-protected content and/or WMDRM-protected content. if the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the ability of the device to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. if you decline an upgrade, you will not be able to access content that requires the upgrade.
The camera on the device will correct projection screen information when performing autofocus and auto keystone functions, the information will be released afterward Such information shall not be saved or uploaded.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-Dsymbol are trademarks of Dolby Laboratories Licensing Corporation.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.