Kinse Solar KS-010 Portable Power Station User Manual

KS-010 Portable Power Station

“`html

Specifications:

• Model: KS-010

• Rated Power Output: 500W

• Battery Type: LiFePO4

• Battery Capacity: 12.8V-307WH / 12.8V-384WH /
  12.8V-460WH

• Solar Panel Specifications (optional): 15V-20V
  Maximum 90W

• Charging Current: Maximum Value 6A

• AC Charger Specifications: 16V 5A, After full
  discharge, the battery capacity reaches 80% after 5 hours of
  charging

• Net Weight: 4.24/4.8/5.36 kg

• Product Size (WDH): 271172228 mm

Product Usage Instructions:

Points for Attention:

Ensure to adhere to the following precautions and points for
attention when using the Portable Power Station:

• Do not exceed the specified load types.
• Avoid exposure to extreme temperatures.
• Do not disassemble or modify the product.

Description of Protection Functions and Application

Scenarios:

The Portable Power Station features various protection functions
including over voltage protection, over current protection, over
temperature protection, overcharge protection, short circuit
protection, and under voltage protection. It is suitable for home
emergency power supply, outdoor camping power supply, night
construction power supply, emergency rescue power supply, etc.

Use Load Type:

The Portable Power Station can be used with AC fans, DC fans, AC
LED lights, DC LED lights, digital products, mobile phones, desktop
computers, notebook computers, TVs, vacuum cleaners, etc.

Function Description:

The product operates with a rated power output of 500W and a
LiFePO4 battery type. It is equipped with various features such as
an intelligent temperature control cooling fan, LCD display for
battery information, and multiple protection functions.

Operation Method:

The AC output and DC output have independent switch functions
for added convenience. Refer to the user manual for specific
instructions on operating the Portable Power Station.

Frequently Asked Questions (FAQ):

Q: Can the Portable Power Station be used to charge

laptops?

A: Yes, the Portable Power Station can be used to charge laptops
as it supports various electronic devices including notebook
computers.

Q: What is the maximum charging time for the battery?

A: The battery capacity reaches 80% after 5 hours of charging
with an AC charger specifications of 16V 5A.

Q: Is there a warranty for the product?

A: Please refer to the manufacturer’s warranty policy or contact
the provided hotline for information regarding product
warranties.

“`

Portable Power Station User Manual
Version: 24071

Precautions for use
1. Open the package and check whether the following accessories are complete 1Portable Power Station; 1AC Adapter Charger; 1User Manual; 1Qualified Certificate; Please check carefully whether the portable power station device is damaged during transportation. If you find that the device is damaged or parts are missing, please do not start the device, and immediately notify the carrier and dealer. 2. The portable power station device should be placed in a well-ventilated place away from water, flammable gases and corrosive substances. 3. Do not place it on its side, keep the bottom and panel of the portable power station uncovered. 4. The panel temperature and the working environment temperature of the portable power station should be kept between 0~40. 5. If the portable power station device is disassembled and used at low temperature, water condensation may occur. It must be used until the inside and outside of the device are completely dry, otherwise there will be a danger of electric shock.
Points for attention:
The portable power station device has high voltage AC output, which is potentially dangerous and must be handled with care and kept away from children, otherwise there will be a risk of electric shock. Do not connect the inverter of the portable power station to the AC circuit, otherwise even if the switch of the device is turned off, the inverter of the device may be damaged. Please ensure that the power used by the electrical appliance is less than the rated output power of the portable power station device. Before the load is connected to the portable power station device, be sure to turn off the load switch before connecting it, and then turn on the load switch for use. It is recommended to charge the portable power station device for at least 10 hours before use. Insert the AC adapter charger into the portable power station’s charging port when charging. The portable power station device can also be used without charging, but the backup time will be less than the standard backup time. It is prohibited to connect half wave (hair dryer, electric heating wire heater) load, high-power motor, laser printer, high- power rectifier load. The portable power station will be automatically protected because of the excessive starting power during operation.
Description of protection functions and application scenarios:
1. Protection functions: over voltage protection, over current protection, over temperature protection, overcharge protection, short circuit protection, under voltage protection. 2. Application scenarios: home emergency power supply, outdoor camping power supply, night construction power supply, emergency rescue power supply, etc.
Use load type:
1. AC fans, DC fans, AC LED lights, DC LED lights, digital products, mobile phones, desktop computers, notebook computers, TVs, vacuum cleaners, etc.
Function description:

Operation method:
Power on: 1. When there is no charging, press the power switch on the panel for more than 3 seconds, release it after the LCD display lights up, and then press the corresponding function switch at this time, there will be a corresponding output. If the corresponding function switch is not pressed within 10 seconds, the portable power station will enter the automatic shutdown state. 2. If there is solar energy and DC charger are connected, the LCD screen will automatically light up. At this time, press the corresponding function switch, and there will be a corresponding output.
Power off: 1. When there is no charging, press and hold the power switch on the panel for more than 3 seconds, release it after the LCD screen goes out, and then shut the portable power station down. 2. If the solar energy and DC charger are connected, the LCD cannot be turned off, so turn off the corresponding function switches and turn off each output. 3. When there is no charging and no output switches are turned on, it will automatically shut down after 10 seconds. Note: The portable power station has DC under voltage and over voltage protection functions. When the battery is under voltage or over voltage, it will automatically shut down.

Model Rated Power Output Waveform AC Output Voltage AC Output Frequency Conversion Efficiency
Charging Interface
AC Output Socket DC Output Voltage LED Light States

KS-010 Technical Parameter Table KS-010 500W
Pure Sine Wave 220V/110V ±5% 50Hz/60Hz ±0.5Hz Maximum Value>90% External Charger Port and Solar Panel Charging Port DC55211 (Built in solar intelligent controller) Universal/European Standard/American Standard/National Standard optional USB 5V 2.4AQC3.0PD45WDC12V8A3DC5521 Port LED high beam, low beam, bright, half-bright, flashing, LED off 6 states

Battery Type

LiFePO4

Battery Capacity

12.8V-307WH / 12.8V-384WH / 12.8V-460WH

SolarPanelSpecifications (optional)

15V-20V Maximum 90W (Optional)

Charging Current

Maximum Value 6A

AC Charger Specifications Charging Time

16V 5A After full discharge, the battery capacity reaches 80% after 5 hours of charging

LCD

Battery Capacity, Battery Voltage, State of Charge, State of Discharge

Heat Dissipation

Intelligent Temperature Control Cooling Fan

Noise

1 Meter Distance < 45 dB

Protection Functions

Low Voltage, Over Voltage, Over Load, Over Temperature, Short Circuit

Product Features

1. DC/AC fully isolated. 2. High frequency design, small size. 3. Pure copper transformer, high efficiency, low no-load loss. 4. Microprocessor, digital control, all-round protection. 5. Built-in solar charger, intelligent charge and discharge management. 6. AC output and DC output have independent switch function.

Environmental Characteristics

Operating Ambient Temperature

-1040

Operating Environment Humidity Storage Ambient Temperature

1085% -2070 Without Condensation

Storage Environment Humidity

590%

Structural Characteristics

ABS

Net Weight(kg)

4.24/4.8/5.36

Product Size WDH(mm)

271172228

Address: No. 9, Industrial Zone, Tagang Administrative Village, Tongzha Town, Hanshan County, Maanshan City, Anhui Province Website: https://www.kinse- solar.com
E-mail: info@kinse-solar.com Hotline: +86 555 2581308 / 139 129 55645 / 135 125 48980

References

• Solar.com | Get Binding Solar Quotes Online
• Maanshan Kinse Energy Technology Co,LTD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>