citronic 154.060UK Cool Warm White Silent PAR Can User Manual

citronic 154.060UK Cool Warm White Silent PAR Can

Important Information

Please read through this manual thoroughly before use, any damage Caused by misuse of product will not be covered by warranty.

Premium build quality and cutting-edge design combine to provide dazzling cool and warm white output from this Cationic Silent PAR light effect. The whisper quiet fan ensures the near to silent operation of 4 x50W COB LEDs with minimal heat emission. Easily control the unit’s internal auto, sound activated and static programs via the control panel on the back or by using 4,6 or 9 channel DMX connection if preferred. The heavy-duty metal chassis and stand/bracket offer strength and solidity and the twist and lock power connections on the back, finish off the Silent PARs professional appearance and performance.

In the box:

Your Silent PAR should arrive with you in a single carton in good condition. The carton should contain1 x main unit, 1x stand/mounting bracket and thumbscrews, 1 x UK twist and lock mains lead and 1 x user guide.

Warning:

To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.

| Please do not open cover, contains high voltage. This product is not serviceable or repairable by the end user. Please refer to qualified personnel for service and repair|
---|---|---

Placement:

• Keep away from damp or dusty environments.
• Ensure adequate airflow around the fixture housings.
• Ensure adequate access to controls and connections.

Cleaning:

• Use a soft cloth with a neutral detergent to clean the casing as required.
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
• Do not use strong solvents for cleaning the unit.
  

Side panel controls:

1. LCD display
2. Manual control buttons
3. Power input (twist and lock)
4. Power output (twist and lock)
5. DMX input
6. DMX output

Manual control menu:

Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN” buttons to navigate through various setting functions.
Press “ENTER” button to save the desired setting.

adjust sensitivity
Sen1-9| Sound-activated sensitivity adjustment
Slave| SLAV| Slave| Slave (Slave, automatic recognition Master）
Edit color| Colo| 1.000-255| EYE1 (0-100%)
2.000-255| EYE2 (0-100%)
3.000-255| EYE3 (0-100%)
4.000-255| EYE4 (0-100%)
St00-19| LED strobe (slow->fast)
Static colors| StAt| CL01-CL36| CCT (warm to cool)
Product Set| Set| dis| 10s| Set the backlight time of the display board to 10 seconds until it stays on continuously, with a factory default of 10 seconds
20s
30s
60s
on
temp| 50-65 C| Set the protection temperature within the range of 50-65℃, the lamp will then begin to reduce power if it exceeds the set
temperature
Send| yes| One click to set the channel mode of all lighting fixtures to the current master’s
channel mode
Send
Information| Info| ver| VVxx| Soft version
temp| XX C| Current light panel temperature（℃

DMX mode:

The Silent PAR can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select Add from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER” to confirm. This unit has 4, 6 or 9 DMX channels as indicated in the table below

4 Channel mode:

6 Channel mode:

9 Channel mode:

Specifications:

Troubleshooting:

No power (mains)| Check mains lead and fuse (if fuse continually blows, refer to your dealer)
---|---
No light output| Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
**** Unresponsive to DMX| Check that unit is in DMX mode and ensure DMX address remains lit to confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/cutting out| Ensure adequate ventilation and unit is not too close to a heat source

Customer Support

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2024 AVSL Group Ltd, Unit 2 Bridgewater Park,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
www.avsl.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>