AGGE 230 V Led strip Instructions

AGGE 230 V Led strip

230 V LED-strip

Instructions for using the LED strips

Before installing the LED strip, read the instructions carefully and save for later use!

• WARNING
  These products function on a 230 V operating voltage and may cause an electric shock or fire hazard if installed or handled incorrectly. The product must be installed according to these instructions and in compliance with country- specific regulations.

• WARNING
  To minimize the risk of fire, electric shock or other accident ensure that the device is disconnected from the main power before installing or connecting the LED strips together.

• WARNING

• Do not turn on the LED strip while it is coiled.

Technical information

• Operating voltage: 230 V AC, 50Hz
• Power: 12W/m, max. 1200W / 100 m
• Light type: LED
• Number of LEDs: 180 LEDs / m
• Color temperature: 4000 K
• Operating temperature: -20°C. .. +45°C
• Storage temperature: -10°c. .. +30°C
• Classification: Indoor/outdoor; LED strip IP65.
• Power cable plug IP44.
• Protection class: Protection class II

Connecting LED strips
Important: When connecting the LED strips to each other, make sure that the power cable is not attached to the power plug. Do not exceed the limit of 100 meters stated by the manufacturer or the maximum power value of 1200 Watts!

1. Turn the connector cap counterclockwise to disconnect it from the first LED strip.
2. Disconnect the power cable from the second set of LED strips.
3. Connect the LED strip sets by connecting the female and male connectors together. Tighten the connection cap.
4. Repeat steps 1, 2 and 3 for the next set of LED strips.
5. Attach the end cap of the strip and tighten it carefully so that it does not come off and water does not get inside the cap.

Using the LED strip

1. Make sure the LED strip connections are properly tightened.
2. Install the LED strip according to the instructions and with the fixing accessories intended for mounting.
3. Make sure that there are no hazardous substances such as water, flammable gases or fine dust around the LED strip.
4. Attach the power cable to the 230 V power plug.

Packaging information

Includes:

• LED-Strip
• Power cable with AC->DC transformer (Included only in Drum Kit models) Instructions

Applications
LED strips can be used indoors and outdoors. In large open spaces, construction sites, warehouses, and other similar industrial or household uses.

IMPORTANT SAFETY GUIDANCE.
READ AND FOLLOW ALL INSTRUCTIONS.

• Do not cover this product, as covering may cause the lamp to overheat, melt, or catch fire.
• Do not switch on the lamp when it is tightly coiled. To avoid the lamp overheating, always keep the lamp surfaces and other parts of the lamp at a distance of at least 2 cm from each other.
• Do not puncture, cut, shorten or split the LED strip.
• Do not route the power cable or light strip through walls, doors, windows or similar structures.
• Do not use the LED strip if the lamp surface or power cable is damaged. Check regularly.
• Do not carry out any kind of repair work on the LED strip or any other part of it. Repairs may only be carried out by specialized personnel.
• Do not immerse the LED strip in liquids or keep the light near water or other liquids.
• Do not install the LED strip in cabinets, containers or other types of cramped and closed spaces.
• Do not install in rooms with flammable materials, such as flammable gases or flammable particles.
• Do not subject the LED strip to continuous stretching or stress.
• DO NITT EXCEED THE MAXIMUM LENGTH OF LED STRIPS STATED BYTHE MANU­FACTURER, 1 00 METERS.
• Attach the LED strip only using the fasteners designed for it. Do not fasten the LED strip or power cable with rivets, nails or other similar fastening methods that may damage the equipment. Do not attach the light fixture permanently to buildings. Follow the instructions carefully when you connect the cables to each other or connect the power cable to the power plug. Make sure that all the joints of the LED strip, including the end cap of the last strip, are tightly closed. For outdoor use, make sure that the joints are protected with electrical joint grease and a shrink sleeve to ensure water tightness.
• Keep the LED strip, power cable and other parts of the lamp out of the reach of children or pets.
• Switch off the lamp if the lamp is left unattended.
• Do not use any kind of cleaning agents to clean the lamp.
• Do not combine this led strip light with other manufacturer’s products!

Do not bend the LED strip to a diameter of less than 20 millimeters or make creases in the LED strip.

Do not bend the LED strip against the width direction.
Do not put pressure on the surface of the LED strip (such as a glass plate or other load).

Warranty

The product has a 12-month warranty for material and manufacturing defects or for a device that has failed in normal use. The warranty does not replace a damaged product if the user has acted contrary to the instructions or structural changes have been made to the product.

Importer:
Handshake Finland Oy
Alasintie 9, 90400 Oulu
www.handshake.fi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>