thermaltake Floe Ultra 240 RGB All-In-One Liquid Cooler Installation Guide
- June 3, 2024
- thermaltake
Table of Contents
Floe Ultra 240 RGB All-In-One Liquid Cooler
Installation Guide
Parts List
Intel Installation Guide
AMD Installation Guide
Tighten screw to the halfway.| Tighten screw again to ensure your waterblock is secure enough.
Installation Guide
Adjust the display to fit your PC build in clockwise rotation
LCD Display Setup Guide
CAUTION
To control the LCD display by TT RGB PLUS Software, please connect the water
block and motherboard with cable O.
Controller Installation Guide
- Comnect the fans to the controller.
- Set the DIP switch on the back side of the controller to assign the number of the controller
- Connect the controller cable onto the motherboard (USB 2.0 9 pin) and controller.
- Connect the power cable to the 4pin Molex connecter and controller.
- If you want to connect two or more controllers, you can sync the controllers with the bridge connector.
https://www.thermaltake.com/floe-ultra-240-rgb-all-in-one-
liquid-cooler.html#productattach
Scan Here
Installation Guide
Documents / Resources
|
thermaltake Floe Ultra 240 RGB All-In-One Liquid
Cooler
[pdf] Installation Guide
Floe Ultra 240 RGB All-In-One Liquid Cooler, Floe Ultra 240 RGB, All-In-One
Liquid Cooler, Liquid Cooler, Cooler
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>