Whirlpool WRF Series French Door Bottom Mount Refrigerator Instructions

: September 13, 2024
: Whirlpool

Table of Contents

PRODUCT DIMENSIONS
ELECTRICAL REQUIREMENTS
LOCATION REQUIREMENTS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

French Door Bottom Mount Refrigerator with Ice Dispenser
(WRF954CIH, WRFA94CIH, WRF974CIH, WRFC9636RV, WRFC9636RZ)

PRODUCT DIMENSIONS

Model Number| WRF954CIH, WRFC9636RV’ WRFC9636RZ| WRF974CIH, WRFA94CIH
---|---|---
Model Size| 23.8 cu ft (673.9 L)| 23.6 cu ft (668.3L)
Height – Overall “A”| 717/8″ (182.6 cm)| 717/8″ (182.6 cm)
Height – Top of Cabinet “B”| 707/8″ (180.0 cm)| 707/8″ (180.0 cm)
Depth – Doors Open 90° “C”| 433/4″ (111.1cm)| 433/4″ (111.1cm)
Depth – Drawer Open “D”| 457/8″ (116.5 cm)| 4578″ (116.5 cm)
Depth – With Handles “E”| 311/2″ (80.0 cm)| 311/2″ (80.0 cm)
Depth – Without Handles “F”| 287/8″ (73.3 cm)| 287/8″ (73.3 cm)
Depth – Cabinet Only “G”| 243/8″ (61.9 cm)| 243/8″ (61.9 cm)
Width – Cabinet “H”| 3513/16″ (91.0 cm)| 3513/16″ (91.0 cm)
Width – Door Open 90° “I”| 435/8″ (110.8 cm)| 433/4″ (111.1 cm)

ELECTRICAL REQUIREMENTS

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.

Electrical: A 115 V, 60 Hz AC only, 15 A or 20 A fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your freezer be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

Water: A cold water supply with water pressure between 35 psi and 120 psi (241 kPa and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.
NOTE: If the water pressure is less than what is required, the fl ow of water from the water dispenser could decrease or ice cubes could be hollow or irregular shaped.

Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 psi and 120 psi (241 kPa and 827 kPa).
If a reverse osmosis water fi ltration system is connected to your home cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 psi to 60 psi (276 kPa to 414 kPa).

LOCATION REQUIREMENTS

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.

IMPORTANT: This refrigerator is designed for indoor and household use only.
To ensure proper ventilation for your refrigerator, allow for a 3/16″ (0.48 cm) of space on each side and 1/4″ (0.64 cm) space at the top. Allow for a 1″ (2.54 cm) space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fi xed wall, leave a 14″ (35.56 cm) minimum space between the refrigerator and wall to allow the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.