MST100P 900Pro BMW Motorcycle Key Match Special Diagnostic Scanner User Manual
- September 12, 2024
- MST
Table of Contents
MST100P 900Pro BMW Motorcycle Key Match Special Diagnostic Scanner
Product Information
Specifications
-
Product Name: MST 900Pro BMW Motorcycle Key Match Special
Diagnostic Scanner -
Packing List:
- 900Pro Diagnostic scanner
- OBD-II
- Main Test Cable
- Battery Clamp Cable
- BMW-10P USB Cable
- Universal Cable
- Jumper line Adapter
- KEY-BOX
- KEY-Programmer
- BMW KEY-Programmer
- Plastic Box
- SD Card
-
Button Functions:
- Up/Down Arrow: Select Test Item
- OK Button: Enter/Execute
- F1, F2 Button: Function Button
- Left/Right Arrow: Page-up/Page-down
- Button: Return/Exit
- Shift Button: Auxiliary Button
Product Usage Instructions
Matters Needing Attention
-
The screen pictures and screenshots shown in the manual may
differ slightly from the real object. -
Contents of the manual are subject to change without
notice. -
Avoid extreme temperature environments for storage and
use. -
Do not disassemble the scanner or change settings without
permission. -
Clean the scanner with a soft dry cloth or diluted neutral
detergent solution. Avoid volatile solvents. -
Avoid using sharp objects on the operation keys.
-
Avoid synchronous online diagnosis test during ignition system
jump-off voltage testing.
Diagnostic Scanner Setup
-
Ensure the ignition switch is on or the engine is running.
-
Check if the power light of the scanner is on (red) or the
communication indicator light is blinking during system
detection. -
Inspect diagnostic connection cable and base for poor contact
or short circuit. -
Verify software version compatibility with the vehicle
type.
BMW Key 46 Chip System Connection Method
- Connect the main test cable to the diagnostic scanner.
- Connect the other end of the main test cable to the K-005
adapter.
Frequently Asked Questions (FAQ)
Q: Can I use a ballpoint pen to press the operation keys of the
scanner?
A: No, avoid using a ballpoint pen or sharp objects to press the
operation keys as it may damage the scanner.
Q: How should I clean the scanner?
A: Clean the scanner with a soft dry cloth. For stubborn dirt,
use a cloth soaked in a diluted neutral detergent solution. Do not
use volatile solvents.
Q: What should I do if the display image is slow or dull?
A: Ensure the scanner is not exposed to extreme temperatures.
Low temperatures can affect display performance.
MST 900Pro BMW Motorcycle Key Match Special Diagnostic Scanner
User Manual
-1-
1. Appearance of MST 900Pro (Hereinafter referred as “diagnostic scanner”):
2. Top view of diagnostic scanner:
3. BMW anti-theft special diagnostic scanner packing list:
-2-
No. Specif./No.
1
2
6-003
3
6-026
4
6-030
5
6-001
6
6-028
7
K-004
8
K-005
9
K-006
10
K-007
11
12
Content 900Pro Diagnostic scanner
OBD- II
Main Test Cable Battery Clamp Cable
BMW-10P USB Cable Universal Cable Jumper line Adapter KEY-BOX KEY-Programmer
BMW KEY-Programmer Plastic Box
SD Card
Qty. 1 1 1 1 1 1 1 1 1 1 1 1
4.Button Function:
Up/Down Arrow: Select Test Item
OK Button: Enter/Execute
F1,F2 Button: Function Button
Left/Right Arrow: Page-up/Pagedown
Button: Return/Exit Shift Button: Auxiliary Button
-3-
5.Matters needing attention:
-
The screen pictures and screenshots shown in this manual (such as the mark of “Button”) are for interpretation only and may be slightly different from the real object.
-
The contents of this manual are subject to change without prior notice.
-
We, “The Company”, shall not be liable for any special, indirect, incidental, or consequential loss of any person arising out of or in connection with the purchase or use of these products.
-
We, “The Company”, shall not be liable for any third party claims of any kind arising from the use of these products.
-
Avoid use and storage in extreme temperature environment. Low temperature will make the display image slow and dull, or completely unable to display. Besides, avoid direct exposure to the sun and do not place the scanner in any place where high temperature will occur. High temperature will make the machine casing fade or deformation, and damage the internal circuit.
-
Do not disassemble the scanner or change the online settings without permission.
-
Do not use a ballpoint pen or other sharp objects to press or prod the operation key of the scanner.
-
Please use a soft dry cloth to clean the outside of the scanner. If the scanner is very dirty, please wipe it with a soft cloth soaked with a diluted solution of neutral household detergent and water. Be careful to wring out excess water before wiping. Do not use petroleum extract, diluent or other volatile solvents to clean, otherwise there is a risk of erasing the printing mark and damaging the protective casing.
-
Do not use synchronous on-line diagnosis test when testing ignition system jump-off voltage, otherwise the scanner may be damaged due to high voltage interference.
-
Check whether the ignition switch is on or the engine is running.
-
Check whether the power light of the scanner is on (red) or the communication indicator light is blinking during detecting the system.
-4- -
Check the diagnostic connection cable and diagnostic base for poor contact or short circuit. 4) Check whether the version of the software is suitable for the vehicle type.
1. Need the appropriate accessories for the diagnostic scanner.
1.1 BMW Key 46 Chip System Connection Method:
-4-
The main test cable is connected to the diagnostic scanner.
The other end of the main test cable is connected to the K-005 adapter.
-5-
The K-005 adapter connects to the motorcycle diagnostic base on the one end
via 6-001 and to the key programmer K-006 on
the other end. 1.2 BMW Key 4D/8A Chip System Connection Method:
-6-
The main test cable is connected to the diagnostic scanner.
The other end of the main test cable is connected to the K007 adapter.
One end of the K-007 adapter is connected to the motorcycle diagnostic base
through 6-001 or 6-003.
-7-
Please follow the steps in “Instructions for connecting to vehicle” to connect
the diagnostic scanner to the motorcycle.
When the motorcycle ignition switch is turned on (the flameout switch also
needs to be turned on for the model with flameout switch) and the diagnostic
scanner is powered on, the following interface will appear. As the screenshot
shown below:
Anti-theft: Key matching of motorcycle anti-theft function, including 46 chip,
4D chip and 8A anti-theft system. One-click Upgrade: Connect WIFI to the
company server and update data. System Setup: Set language, buzzer and scanner
module check. Version Information: Display the serial number, software
version, hardware version, MFG and other information.
Select “Anti- theft”, press the [OK] button, read the disclaimer, and press
the [OK] button to proceed to the next step. As the screenshot shown below:
-8-
Select “02 BMW Key Match”. The following screen appears. You can select the
type of the tested system, such as the system type of Mechanical Key 4D,
Keyless Start 8A or Mechanical Key 46 chip. As the screenshot shown below:
Select the corresponding system menu according to the type of anti-theft key,
and execute according to the operation prompts of the diagnostic scanner. For
example: If you select the “01 Mechanical Key 4D Chip Key Match” from the
menu, and press the [OK] key to continue. The diagnostic scanner will prompt
you to use the corresponding key programmer to connect correctly, as the
screenshot shown below:
-9-
Press the [OK] button to proceed to the next step, and the diagnostic scanner
will prompt you to connect to a WiFi. [see “V. WIFI connect and upgrade
instructions” for details] As the screenshot shown below:
If the WIFI has been connected, press the [OK] button to continue the next
step. The diagnostic scanner prompts to turn on the ignition switch and
activate the anti-theft system, as the screenshot shown below:
– 13 –
Press the [OK] button to proceed to the next step. After the diagnostic
scanner is correctly connected to the antitheft system, the relevant
information of the ECU will appear. As the screenshot shown below:
If the diagnostic scanner prompts communication failure, can not connect to
the ECU, please check the reason for such communication failure: such as
whether the ignition switch is opened correctly, anti-theft system type
selection is correct and so on. Press the [OK] button to proceed to the next
step, and the related function menu of ECU will appear. As the screenshot
shown below:
– 13 –
01 Read Information: Use for reading ECU related information, such as VIN,
software number, and so on. 02 Read The Key: Use for reading the key channel
information, you can get the number of keys have been matched and so on. 03
Restore The EWS Module: Use for restoring the damaged EWS module. 04 Key
Programming: Use for adding a new activate key or deleting an existing key. 05
Clear Fault Code: Use for clearing the fault code of the EWS module.Select the
corresponding functions from the menu and follow the prompts of the diagnostic
scanner to operate. If you have any questions, feel free to contact our
technical support.
Select “System Settings” from the main menu and press the (OK) button. The
following interface will appear:
This function can set whether the keystroke will make sound and modify the
current language.
– 13 –
Press [ ] [ ] button to select an item, and press [] [ ] button to modify the
value.(Note: Language can be configured according to different countries, but
the factory setting is limited to one single language) Select “Version
Information” from the main menu,
After you press the (OK) button, the following screen will be displayed: You
can view the serial number, software version and other detail information of
the product.
– 13 –
MST 900Pro diagnostic scanner is mainly used for key match during motorcycle
repair process.
01. Applicable test vehicle model: BMW, details please refer to the
configuration table of the diagnostic scanner. 02. This product is portable,
convenient and practical, which is easy to carry. 03. Software update is
simple, just write the program upgrade package into the SD card, you can
easily complete the software update process.
01. Supported languages: Multi-language optional: Simplified Chinese,
Traditional Chinese, English, Vietnamese, Indonesian, Spanish; The same
diagnostic scanner will not be equipped with all languages.
02. Upgrade method: Online SD card upgrade.
03. Power supply voltage: 10-18V
04. Operating current: less than 200mA
05. Operating temperature:-20–50
– 13 –
1. Obtain the corresponding upgrade file according to the serial number of
the diagnostic scanner, and save it to your local PC. 2. Unzip the upgrade
package to a new folder. 3. Connect the computer through a SD card with SD
card reader, click my computer, find the U disk(SD card), and click enter.
– 14 –
4. Copy the contents of the unzipped folder to the U disk(SD card). 5. Insert
the SD card back into the diagnostic scanner and power on. 6. The following
screen will be displayed after the diagnostic scanner is started:
Press the OK button to start the upgrade process:
– 19 –
1. The diagnostic scanner is connected to the external power supply. After
the diagnostic scanner is powered on, click the “One-click Upgrade” icon on
the home screen.
2. Enter the one-click upgrade page.
3. Select “Wireless Network Settings” to enter, and select the “Turn On
Wireless Network” option. Select “OK” to enter.
– 19 –
4. After finding your network option, you can select “Yes”, but you need to
change the connection password through the hotspot on your personal phone to
use the default password [shortcut for WiFi link]; If you select “No”, you
will need to enter the WIFI connection password by selecting “No”.
5. Press up “”, down “”, left “” and right “” arrow button to select the
alphabet character and Arabic numerals corresponding to your WIFI password. F1
button is for confirming the selection. Enter the complete password and press
“OK” button, the diagnostic scanner will indicate that the connection is
successful.
– 19 –
6. After the diagnostic scanner prompts that the network connection is
successful, it will enter the “Xinsicheng Remote Upgrade Service System”.
After the WIFI connection is successful, select “OK”.
7. The one-click upgrade page is displayed. To upgrade the software, select
“Remote Upgrade Software”. Press the return button to exit, if you do not need
to upgrade the software.
– 19 –
8. If you select “Remote Upgrade Software”, the diagnostic scanner will
display the machine serial number, current software version, and latest
software version, and press “OK” to start the upgrade process.
9. Wait for the download process display bar reaches 100%, the diagnostic
scanner will prompt you that the download process is complete. select “OK” to
restart the diagnostic scanner to update the software [power off/then power on
again].
– 19 –
10. Wait for the display bar to finish and the software update is complete.
If there is any doubt about the use of the diagnostic scanner, please contact
the technical support department, thank you!
– 19 –
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>