RC-MST RRX2.0S Scale Drift Car Max Kit Instruction Manual
- June 12, 2024
- RC-MST
Table of Contents
RRX2.0S Scale Drift Car Max Kit
www.rc-mst.com
SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE
EXPLOWED VIEW
TOOLS & ACCESSORIES
Necessary tools and accessories for [ RRX 2.0S ] assembly 
PARTS BAG
FRONT LOWER ARM
FRONT UPPER ARM
STEERING ARM
STEERING SERVO
FRONT STEERING-SUSPENSION
REAR DIFF SET
REAR GEAR BOX
MOTOR MOUNT
DAMPER STAY
FRONT AXLE
REAR AXLE
DAMPER
PARTS WHEELS
BUMPER &BODY MOUNTS
PARTS
SETUP SHEET ORGINAL SETING
DATE:…………………………………..
SURFACE:……………………………..
NOTE:…………………………………….
TRACK :………………………………….
GRIP :……………………………………… 
PARTS CODE
| 110001 | Round head screw M3 X6 (10) | 210161 | Ball corrector rut 4.8 (4) |
|---|---|---|---|
| 110002 | Round head screw M3 X8 (10) | 2102188K | Alum. tumtuckle 3 X68 (black) |
| 110004 | Round head screw M2 X4 (6) | 210344 | Ball corrector rut L 4.8 (4) |
| 110005 | Countersunk screw M3 X8 (10) | 210378 | Wde balancing bun per |
| 110011 | Cap screw M3 X6 (6) | 210381 | Car body post set |
| 110013 | E-chp 2.0 (10) | 210433 | Ball corrector 4.8 X4.5 S (5) |
| 110015 | Flange nut M4 (4) | 210491 | Ball corrector L 5.8 X4 (4) |
| 110017 | Shaft 2 X9.8 (10) | 210510CR | Enlarged brake calipers (red)(4) |
| 110020 | Steel ball 3.0 (13) | 210579 | RMX 2.0 Rear motor conversion kit |
| 110026 | Round head screw M3 X10 (10) | 210593 | Post 11.5 (2) |
| 110043 | Countersunk screw M3 X12 (10) | 220012 | Mineral oil 10$ |
| 110045 | Round head screw M2X8 (partial thread) (6) | 230041 | Wheel hubs w/disc |
shape (large)
110047| Spacer 3 X 6 X0.5 (8)| 230058| Steering arm set
110052| Countersunk screw M3 X 10 (10)| 230059| Ball tiff pint
110053| Cap screw M2.5X 30 (2)| 230060| Battery mount
110055| G-clip 10.0 (10)| 230061| Rear gear box set
110059| Shaft 1.5 X7.8 (8)| 230062| Front arm set
110061| Round head screw M3 X14 (6)| 230063| Front damper stay
110063| Round head screw M2X8 (6)| 230064| Rear damper stay
110065| Round head screw M2.5X 12 (6)| 230065| Front head set
110070| E-Clip 3.0 (10)| 230067| 4.8 Rod ends set (M/S)
110073| Countersunk screw M3 X16 (6)| 230068| Spur gear 48P-80T
110079| E-clip 2.5 (10)| 2300E8| Suspension mount set (+1.0/-2.0)
110080| Spacer 2.6 X5.8 X0.6 (8)| 230070| Shaft bush & spacer set
110082| Round head screw M2 X3 (6)| 230071| Upper deck comeda
110088| Round head screw M3X 20 (6)| 230072| RMX Lower deck
110091| Cap screw M3 X 40 (6)| 230073| RMX Upper deck set
110095| Cap screw M3 X 35 (6)| 230093| Coaxial front wheel hubs
110099| Countersunk screw M3 X 4 (10)| 230096| MB Rear wheel hats
110100| Cap screw M3 X30 (6)| 230097| MB Rear lower arm
110101| Countersunk screw M3 X20 (6)| 310001| Ball connector 4.8 X4.5 (5)
110102| Round head screw M2.5 X5 (6)| 3100048K| Spring retainer (black) (2)
110108| Cap screw M3 X 14 (6)| 310008| Piston rod (4)
110109| Countersurk screw M2.5X 12 (6)| 310032| Diff. screw & spring set
120001| Ball bearing 10 X15 (4)| 310033| Diff. plate (2)
120002| Ball bearing 5 X10 (4)| 310035| Lower arm shaft 2.6 X22 & 25 (each one
pair)
120003| Ball bearing 5 X8 (4)| 310048| Arm shaft 2.5 X46 (4)
120008| Thrust bearing 2.5X6| 310050| Ball connector 4.8 X6 (5)
120017| Bearing 5X8 (4)| 310064| Bevel gear 16T G)
120018| Ball bearing 4 X10 X4 (2)| 310065| Wheel axle (2)
120019| Ball bearing 8 X 12 (2)| 3101018K| RMX Alum. motor mount (black)
120024| Beanng 3X6 X2.5 (4)| 310103| Arm shaft 2 X28 (2)
120025| Ball bearing 6 X10 X2.5 (2)| 310104| RMX quick-release bevel gear
arbor
130002| 0-ring 11.5 X1.5 (4)| 310105| RMX Main shaft
130004| 01 seal (4)| 810002| Steel reinforced turnbuckle 3 X20 (2)
130006| Double sided tape (5)| 810003| Steel reinforced turnbuckle 3 X25 (2)
130008| Black grease| 810005| Steel reinforced turnbuckle 3X 32 (2)
130028| Damper 0-ring P3 (blue) (10)| 820004| Steel CVD great angle universal
shaft 42 (2)
130032| Damper cap 0-ring (10)| 820020| Spacer 5X 7X 0.3(8)
130034| Sponge 20 X 80 X1 (4)| 820024| Spacer 10X 12X0.3 (8)
130036| Tools| 820030| Cross joint (2)
130040| Ball cliff. grease| 820049| Wheel hub spacer 1.0 (4)
210031| Renfaced adjuster set 5.8 X26 (4)| 820063| Suspension mount spacer
0.5mm (4)
210035| Bevel gear set 40-13| 820075| R-clp 5.0 (10)
210047| Renfaced adjuster set 4.8 X18 (8)| 820079| Damper plastic maintenance
set (2)
210057| Damper cap set| 820095| AKM 2WD axle (2)
210063W| Shaft bush & spacer set (write)| 820103-3| 31mm Hard cod spring
(soft) (2)
210071| Damper cylinder (2)| 820104-4| 31mm Soft col spring (super-soft) (2)
210082| Piston spacer set (POM)| 820126| NS High-torque servo saver
210160| Ball connector 5.8X6 (4)| |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>