GLORB SNRGY App User Manual
- September 12, 2024
- GLORB
Table of Contents
GLORB SNRGY App
Quick Start Guide
Congratulations – Welcome to the GLORB experience!
Let’s dive into the essentials to get you up and running:
- Unpack the box and check for any missing or damaged items.
- Place or hang the GLORB using the cable hook or table stand/ceiling cup.
- Plug the adapter into an outlet.
Pair Your GLORB with the SNRGY App
- Scan the QR code to download the Native WLED App (or find it on the App Store or Google Play)
- Enable Wifi on your smartphone.
- Open the app and let it automatically connect to the GLORB.
- Follow the tutorial on how to use the app
Access the full User Manual
For more details and troubleshooting, visit www.glorb.me/ usermanual or scan the QR code on the right.
Inside the box
- X1 The GLORB 1
- X1 USB-C cable (attached to the GLORB) 2
- X1 Table stand/ceiling cup 3
- X1 5v USB-C adapter 4
- X1 Cable hook 5
- X1 User Manual
How the app works
- To get an in-depth understanding of how the SNRGY app works.
- Please scan the QR code below and get access to tutorials
Cable hook set up
Installing your new lamp involves a few simple steps to ensure it is securely mounted and safely connected. In this guide, we will walk you through the process of assembling and installing your lamp, from threading the cable through the necessary components to securing the fixture flush against the ceiling. Follow these step-by-step instructions carefully to ensure a safe and successful installation.
- Thread the pentagon-shaped “nut” onto the cable (in the correct direction).
- Insert the cable through the bracket (from the outside to the inside).
- Position the “cord grip” plastic piece on the cable at the correct height.
- Click the two plastic screw parts onto the cable, “inside” the bracket.
- Push the plastic screws through so that they stick out of the bracket, then tighten the plastic nut.
- With the lamp hanging on a hook, slide the bracket up until it is flush with the ceiling.
Safety Information
- Before using your GLORB, please read these instructions carefully.
- The GLORB can handle some water exposure, but keep the power supply and connections dry to avoid damage.
- Remember to handle the GLORB with care, as it is a delicate product.
- Use only the provided power adapter or a 5V, 3A USB-C power source.
- Install the GLORB indoors only.
- Disassembly or modification voids the warranty.
- Do not use if the power cord or plug is damaged.
- Keep away from major heat sources.
Limited Warranty
12-Month Limited Warranty
- Your GLORB lamp has a one-year limited warranty for defects.
- Keep your receipt for warranty claims.
Troubleshooting
Customer Service
- Need assistance or want to share your feedback?
- We’d love to hear your thoughts!
- Email: support@glorb.me
- Official Website: www.glorb.me ****
- glorb.me/usermanual
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
CE Declaration of Conformity:
- This product conforms to the essential requirements of the relevant European health, safety, and environmental protection legislation.
- For more detailed information and the full Declaration of Conformity, please contact the manufacturer.
- Find more info at: www.glorb.me/statement
- Product Name: GLORB
- Product Code: GL01C25WH1
- Manufacturer: HW Electronics
- © SNRGY Studios AB – Gothenburg, Sweden
Documents / Resources
|
GLORB SNRGY
App
[pdf] User Manual
2BKK9-GL01A25WH1, 2BKK9GL01A25WH1, SNRGY App, SNRGY, App
---|---