MOCA MD-TWS-036 TWS Wireless Earbuds User Manual
- September 12, 2024
- MOCA
Table of Contents
MOCA MD-TWS-036 TWS Wireless Earbuds
Specifications
- Power On: Automatically when earbuds are taken out, or manually by long-pressing the button of the charging case for 3 seconds
- Power Off: Automatically when placed back into the charging case, no paired device within 3 minutes, or battery voltage drops below 3.0V
- Pairing: Automatically enters pairing mode when first used, connect by searching and selecting the device named MOCA
- Reconnection: Automatically reconnects to the last paired device within 3 minutes of being taken out from the charging case
- Charging: Supports wired and wireless charging, LED indicators show battery levels (1%-33%, 34%-66%, 67%-100%)
FAQs
- Q: How do I know if the battery is low?
- A: If the battery is low, a Battery low prompt will be heard every 4 minutes.
- Q: How do I disconnect a paired device?
- A: Long-press the button on the charging case for 2 seconds to disconnect the paired device.
- Q: How do I switch between music and game modes?
- A: Click the left/right earbud for 4 times to switch between Music Mode and Game Mode.
Connection
- Turn on: Automatically turn on after taking the earbuds out, coming with a POWER ON prompt.
- It can be turned on manually by long-pressing the botton of charging case for 3 seconds.
- The earbuds will automatically turn off when placed back into the charging case.
- It will also turn off if there is no paired device within 3 minutes or if the battery voltage drops below 3.0V. A “Power off” prompt will be heard.
- If the battery is low, a “Battery low” prompt will be heard every 4 minutes.
Bluetooth Pairing
- When turned on, the earbuds will automatically enter pairing mode when first used.
- Simply turn on Bluetooth to search and select the device named “MOCA”.
- You’ll hear the prompt of connected, or Disconnected.
Disconnect the paired device, connect the new device
- Long-press the button of the charging case for 2s to disconnect the paired device when the earbuds are put back into the charging case with the case lid opened.
- (The indicator will flash twice if the disconnection is successful. If not, the indicator will disappear after flashing seven times.)
Reconnection
- The earbuds will automatically reconnect the last paired device when taken out from the charging case.
- The earbuds will be automatically reconnected when it steps in the effective working distance within 3 minutes.
Operation
- Play/pause: click the left/right earbud
- Previous: Double-click the left earbud
- Next: Double-click the right earbud
- Answer: Click the left/right earbud
- Decline: Long press left/right earbud for 1.5s
- Hang up: Long press left/right earbud for 1.5
- Call transfer: Click the left/right earbud
- Switch the call: Double-click the left/right earbud
- Assistant: Triple-click the left/right earbud
- Noise-canceling switch : Long-press left/right for 1s to enter the prompt reminder
- Noise-canceling: Sh LED indicator keeps on
- Standard mode: Eh? LED indicator disappear
- Transparency mode: Heh! LED indicator flashes
- Game (Low-latency) Mode: click the left/right earbud for 4 times
You’ll hear the prompt of Music Mode / Game Mode.
Notice:
- When the music player is turned on, the music automatically starts playing after wearing the earbuds, and it will pause after taking off either one or both earbuds.
- It will automatically switch to the transparency mode when one earbud is removed in the noise canceling/standard mode, and will revert back to the previous mode after re-wearing the earbud.
Charging indicators
- This product supports both wired charging and wireless charging.
- The LED light will flash while charging and will turn off once fully charged.
- (The three indicators correspond to different battery levels: 1%-33%, 34%-66%, and 67%-100% respectively.)
- To check the available battery, you can do so by placing the earbuds into the charging case, opening the charging case, or clicking the button of the charging case. The indicator will show the battery status of the charging case.
- When the battery is low, one of the indicators will disappear after a single flash, and during charging, one of the indicators will disappear after flashing three times.
Restore factory setting
- To clear the paired information, long-press the button of the charging case for 6 seconds when the earbuds are in the charging case and the charging case is opened.
- The three LED indicators will turn on in sequence and then turn off after a successful reset.
The use and function of APP
- Download the MOONDROP LINK 2.0 through the official website, Google APP, or App tore.
- The APP provides tuning switching, function customization, noise-canceling switching, and other expanded functions.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
ISED Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>