Teslo coil 10 Bluetooth Compatible Music High Frequency Voltage Pulse Electric Arc Generator Instruction Manual
- September 11, 2024
- Teslo
Table of Contents
Tesla coil 10 Bluetooth Compatible Music High-Frequency Voltage Pulse
Electric Arc Generator
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 20cm between radiator and body during operation
Safety Precautions
- Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer.
- Maintain a minimum distance of 20cm between the radiator and your body during operation to comply with FCC radiation exposure limits.
Operating Guidelines
- Ensure the device is placed on a stable surface before operation.
- Power on the device using the designated button or switch.
- Follow the manufacturer’s instructions for specific usage functionalities.
Cleaning and Maintenance
- Disconnect the device from power before cleaning.
- Use a soft, dry cloth to clean the exterior of the device.
- Avoid using liquid cleaners.
- Regularly check for any signs of damage or wear and tear.
Attention
- Minors should be accompanied by parents.
- The electricity needle is very pointed, be careful.
- Keep away from flammable and explosive items.
- Do not place objects on the coil, which may cause the coil to blacken.
Tesla Coil 10 Product List
You need to open (Settings) → Sound & Haptics → [Headphone Security) →
Disable
[Reduce Loud Sounds) option before playing music on your Apple phone.
Ordinary music is not effective, it is recommended to use square wave music,
square wave music can be obtained by contacting customer service.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment. This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two
conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
FAQs
Q: Can I modify the device for enhanced performance?
A: No, any changes or modifications not approved by the manufacturer may void
your warranty and authority to operate the equipment.
Q: What should I do if I experience interference during operation?
A: Ensure that the device is placed at least 20cm away from your body and
other electronic devices. If interference persists, contact customer support
for assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>