ROBERT GORDON INTERIORS 2255-SCO-US Dish Wall Sconce Instruction Manual
- September 11, 2024
- ROBERT GORDON INTERIORS
Table of Contents
ROBERT GORDON INTERIORS 2255-SCO-US Dish Wall Sconce
Product Information
Specifications
- SKU #: 2255-SCO-US
- Product: Dish Wall Sconce
- Dimensions: Dia:250mm H:90mm
- Voltage: 110-120V AC 60Hz
- Globe: Fitting includes 3W LED G9 globe
- Construction: Class 1
Product Usage Instructions
Installation Instructions
- Remove all packaging material from the lighting product. Be careful not to discard any small parts such as screws that may be hidden within the boxing.
- Use the mounting bracket (C) as a template to mark the screw positions on the wall.
- When satisfied with the position, install the mounting bracket (C) onto the wall by using mounting screws (D), and use wall anchors (A) if required.
- Ensure the main power supply is turned off before connecting wires (E). Make sure all wires are secure and that no bare wires are exposed.
- Install the luminaire (F) onto the mounting bracket (C) using the fixing screws (B) provided.
- Install the LED globe (J) into the lamp holder (H) using a tissue or clean gloves to avoid touching with bare hands, as this could shorten the life of the globe.
- Position the ceramic shade (I) over the threaded ring (G) carefully until it makes contact with the wall.
- While holding the ceramic shade (I) in place, install the glass ball (K) onto the threaded ring (G) by turning clockwise. Ensure all pieces are secure but do not over-tighten to prevent breakage of ceramic or glass pieces.
Frequently Asked Questions (FAQ)
-
Q: Can I install this lighting product myself?
A: No, this item must be installed by a licensed electrician to avoid hazards and ensure safety. -
Q: How can I get more information about this product?
A: For more information on this product, please contact Robert Gordon Pottery at +61 3 5941 3144 or email sales@robertgordonaustralia.com.
Thank you for purchasing a high-quality Australian-made product, proudly designed and crafted by Robert Gordon Pottery. All our ceramic lighting products are made from high fired stoneware and adhere to all U.S. standards and requirements. To ensure correct function and safety, please read and follow all instructions carefully before assembly. Keep this document handy for future reference.
Installation instructions
- Remove all packaging material from lighting products. Be careful not to discard any small parts such as screws that may be hidden within the boxing.
- Use the mounting bracket (C) as a template to mark the screw positions on the wall.
- When happy with the position, install the mounting bracket (C) onto the wall by mounting screws (D), using wall anchors (A) if required.
- Make sure the main supply is turned off, before connecting wires (E). Ensure all wires are secure and that no bare wires are exposed.
- Install the luminaire (F) onto the mounting bracket (C) using the fixing screws (B) provided.
- Install the LED globe (J) into the lamp holder (H) with a tissue or clean gloves. Be sure not to touch it with bare hands, as this could shorten the life of the globe.
- Carefully position ceramic shade (I) over the threaded ring (G) until the piece makes contact with the wall.
- Whilst holding ceramic shade (I) in place, install a glass ball (K) onto the threaded ring (G) by turning clockwise. Turn until all pieces are secure but do not over-tighten as this may cause either ceramic or glass pieces to break.
Specifications
- SKU #: 2255-SCO-US
- Product: Dish Wall Sconce
- Dimensions: Dia:250mm H:90mm
- Voltage: 110-120V AC 60Hz
- Globe: Fitting includes 3W LED G9 globe
- Construction: Class 1
Warranty
- This product is covered by a 12-month warranty, from the date of purchase.
- The warranty does not begin from the date of installation.
- This product must be installed by a licensed electrician. The warranty will be void if this requirement is not met.
- Retain proof of purchase and evidence of installation by a licensed electrician.
- The warranty will be void if there is any damage to the product, due to improper usage or modification to fitting.
- Failure to follow the instructions in this manual may increase the risk of damage or injury and will void the warranty.
- If the luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person to avoid a hazard.
THIS ITEM MUST BE INSTALLED BY A LICENSED ELECTRICIAN
Installation requirements
- The product must be installed by a qualified electrician.
- All wiring and installation of the light fitting must adhere to local and national wiring regulations. for eg. [UL 1598:2021 Ed.5+R:18Jun2021], [CSA C22.2#250.0:2021 Ed.5+U.
- Do not exceed the maximum wattage rating.
- Ensure a suitable location for installation. This product is intended for indoor use only. Do not install in front of air flow vents or systems and areas compromised by moisture or dampness. If the installation area is prone to moisture an appropriate exhaust fan may be required. Damage caused by corrosion is not a product fault, and as such not covered under the product warranty.
- Check the entire product before installation for any sign of damage. Do not install the product if there appear to be signs of damage in any way.
- Ensure before any work is undertaken that the power is switched OFF at mains.
Safety Tips/Maintenance
- This fitting must be earthed.
- Always ensure the power is OFF and the light fitting has cooled down before carrying out any maintenance or cleaning on the globe or pendant.
- To avoid damage to fitting, ensure the power lead and screws are secure before connecting the power.
- Ensure that the fitting does not come in contact with corrosive chemicals, etc.
- To clean the bowl sconce, wipe with a damp cloth making sure the power is OFF.
Designed and made in Australia by Robert Gordon Pottery
For more information on this product, please contact us:
- +61 3 5941 3144
- sales@robertgordonaustralia.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>