Fisher-Price FFJ01 Sit-to-Stand Activity Center User Manual

: September 12, 2024
: fisher-price

Table of Contents

Fisher-Price FFJ01 Sit-to-Stand Activity Center
Parts
Infant Activity Center Assembly
Battery Installation
Toddler Play Table
Convert Back to Infant Activity Center
FCC STATEMENT
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fisher-Price FFJ01 Sit-to-Stand Activity Center

Keep instructions for future use.
Read all instructions before assembly and use of the product.
Infant Activity Center: When used with the seat, the child must be able to hold their head upright unassisted and is not able to walk or climb out of the product.
Toddler Play Table: 9-36 months
Product features and decorations may vary from photos.

fisher-price.com

WARNING

Prevent serious injury or death (when used with seat):

Use only for a child who can hold their head upright unassisted and who is not able to walk or climb out of the product.
Never leave a child unattended. Always keep the child in view while in the product.
Never use near steps or pools, hot surfaces, or areas that may be hazardous to a child. The product may move during use.
To avoid tipping over, place the product on a flat, level surface.
Strings can cause strangulation! DO NOT place items with a string around the child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over products or attach strings to toys.

Consumer Information

Adult assembly is required. Tool required for assembly: Phillips screwdriver.
Requires three AA (LR6) alkaline batteries (not included).
Keep these instructions for future reference, as they contain important information.
This product may come with replacement warning labels which you can apply over the factory-applied warning label if English is not your primary language. Select the warning label with the appropriate language for you.

Spiral Ramp Parts

The spiral ramp can only be used in Toddler Play Table Mode (9-36 months). Please save these parts for later assembly or assemble them now and store the ramp in a safe place for future use.

Parts

M4,5 x 16 mm Screw – 12

SHOWN ACTUAL SIZE

Tighten and loosen screws with a Phillips screwdriver. Do not over-tighten screws.

Shape Sorter Toy

Musical Alligator Toy

Before beginning assembly, you may want to install batteries into this electronic toy. Refer to the Battery Installation section in these instructions.

Infant Activity Center Assembly

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. Do not use the product if it is damaged or broken. Do not use accessories or replacement parts other than those approved by the manufacturer.

Turn the table top over on a protected surface.
Fit the legs into the sockets on the tabletop.
Insert three screws into each leg and tighten.
Turn the table upright.
The shape sorter toy is labeled with a number. Match it to the area on the tabletop with the same number.
Insert and “snap” the tabs on the shape sorter toy into the slots with the matching number on the table top.
Pull up on the toy to be sure it’s attached to the tabletop.
The elephant bead bar toy is labeled with a number. Match it to the area on the tabletop with the same number.
Insert and “snap” the tabs on the elephant bead bar toy into the slots on the tabletop.
Pull up on the toy to be sure it’s attached to the tabletop.
The zebra and lion teeter-totter toy is labeled with a number. Match it to the area on the tabletop with the same number.
Insert and “snap” the tabs on the zebra and lion teeter-totter toy into the slots on the tabletop.
Pull up on the toy to be sure it’s attached to the tabletop.
Turn the assembly upright.
At an angle, fit the tabs on the musical alligator toy into the notches on the tabletop.
Lower and push the toy into place. Pull up on the toy to be sure it’s attached.

Hint: This toy is designed to be easily removed to change batteries or use on the play mat. Simply press the tab on the back side of the musical alligator toy and lift it to remove it.

Insert and “snap” the flower and bee teether, giraffe rattle, hot air balloon mirror, and palm tree spinner into the sockets on the tabletop.

Hint: These toys are removable. Simply press the tabs on the base of the toy and lift to remove.

Position the seat ring taller side and the seat pad red clips so that both are facing you.
Place the pad inside the seat ring.
Turn the seat ring and pad over so that the bottom faces you.
Hook the pad red clips to the notches in the seat ring on either side of the red wheel.
Now, hook the remaining six clips to notches in the seat ring.

CONSUMER ASSISTS

1-800-432-5437 (US)

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.

Hearing-impaired consumers 1-800-382-7470.

Battery Installation

For longer life, use alkaline batteries.

Locate the battery compartment door on the bottom of the musical alligator toy.
Loosen the screw in the battery compartment door and remove the door.
Insert three, new AA (LR6) alkaline batteries.
Replace the battery compartment door and tighten the screw.
If this toy begins to operate erratically, you may need to reset the electronics. Slide the power/volume switch off and back on.
When sounds/light become faint or stop, it’s time for an adult to change the batteries.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc), or rechargeable.
Insert batteries as indicated inside the battery compartment.
Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.
Never short-circuit the battery terminals.
Use only batteries of the same or equivalent type, as recommended.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the product before charging.
If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

WARNING

Prevent serious injury or death (when used with seat):

Use only for a child who can hold their head upright unassisted and who is not able to walk or climb out of the product.
Never leave a child unattended. Always keep the child in view while in the product.
Never use near steps or pools, hot surfaces, or areas that may be hazardous to a child. The product may move during use.
To avoid tipping over, place the product on a flat, level surface.
Strings can cause strangulation! DO NOT place items with a string around the child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over products or attach strings to toys.

Adjust Seat Height for the Infant Activity Center

Unbuckled – Lowest Position
Lower Buckle Fastened – Middle Position
Upper Buckle Fastened – Upper Position

The seat has three seat height positions. Place baby in the seat. Baby’s feet should be flat on the floor.
Remove the baby from the seat and fasten or unfasten the buckles to shorten or lengthen the seat pad.

Toddler Play Table

Insert and “snap” the ramp supports into the sockets in the ramp.

Hint: The ramp supports are designed to assemble to the ramp one way. If one does not seem to fit, try inserting it into the other socket.

Insert and “snap” the ramp supports and the end of the ramp into the sockets and slot in the ramp base.
Fit the remaining peg on the ramp into the socket.
Turn the ramp assembly over.
Insert a screw into the ramp base and tighten.
Push any of the tabs on the seat ring and push to remove the seat.
Turn the seat ring over and remove the seat pad clips from the notches in the seat. Then remove the seat pad.
Replace the seat ring in the center of the tabletop. Push to “snap” into place.
Pull up the seat ring to be sure it’s attached to the tabletop.
Fit the tab on the ramp into the socket in the seat ring.
Lower and push the ramp down to secure it in place. Pull up on the ramp to be sure it’s secure to the seat ring.
Remove the shape sorter roller bugs to use on the spiral ramp!
Fold the T-end of the strap on the roller bugs and push through the slot in the shape sorter.
Repeat this process to remove the other two roller bugs from the shape sorter toy.

Convert Back to Infant Activity Center

Tip the table on its side.
Pull the latch and push to remove the ramp assembly from the seat ring.
Push any of the tabs on the seat ring and push to remove the seat ring.
Follow the assembly instructions to replace the seat pad with the seat ring, the seat assembly to the table top, and the play mat onto the legs.
Fold the T-end of the straps roller bugs and re-attach them to the shape sorter toys.

Musical Fun!

Slide the power/volume switch to ON with low volume, ON with high volume, or OFF.

Slide the mode switch to:

Short Play – Press the keys to hear a musical note or short tune.
Long Play – Press a key for up to 20 minutes of music!

Care

The seat pad is machine washable. Wash it separately in cold water on a gentle cycle. Do not use bleach. Tumble dry on low heat and remove promptly.
The table, seat ring, and toys can be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the musical alligator toy.

Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.

FCC STATEMENT

(UNITED STATES ONLY)

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B)/NMB-3 (B)

Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

FREQUENTLY ASKED QUESTIONS

What is the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

The Fisher-Price FFJ01 Sit-to-Stand Activity Center is a versatile developmental toy designed to support babies as they transition from sitting to standing. It features various interactive elements to engage and entertain infants.

What are the dimensions of the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

The product dimensions are 24.23 x 24.23 x 21.88 inches, making it a compact and space-efficient activity center for home use.

What is the maximum weight recommendation for the Fisher-Price FFJ01 Sit-to- Stand Activity Center?

The maximum weight recommendation is 25 pounds, ensuring it is suitable for infants and toddlers who are within this weight range.

What material is the Fisher-Price FFJ01 Sit-to-Stand Activity Center made from?

The activity center is made from polyester, which is durable and easy to clean.

How do you care for the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

The Fisher-Price FFJ01 Sit-to-Stand Activity Center is machine-washable, making it easy to maintain and keep clean.

What type of power source does the Fisher-Price FFJ01 Sit-to-Stand Activity Center use?

The activity center is battery-powered and requires 3 AA batteries to operate.

How long does the battery life last in the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

The battery life lasts approximately 20 hours, providing extended playtime before needing to replace the batteries.

What is the weight of the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

The item weighs 1.95 pounds, making it lightweight and easy to move around.

What are the key features of the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

Key features include interactive toys, a variety of textures, and activities designed to engage babies and support their development as they transition from sitting to standing.

How does the Fisher-Price FFJ01 Sit-to-Stand Activity Center support a baby's development?

The activity center encourages motor skills development, sensory exploration, and cognitive skills through various interactive elements and activities.

What is the price of the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

The current price is $75.99.

How can I replace the batteries in the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

To replace the batteries, locate the battery compartment, typically found at the base of the activity center. Open it, insert 3 AA batteries, and close the compartment securely.

Why is the sound not working on the Fisher-Price FFJ01 Sit-to-Stand Activity Center?

Check if the volume switch is set to the correct level. Ensure that the batteries are installed correctly and are not depleted. If the issue persists, replace the batteries with fresh ones.

What should I do if the lights on the Fisher-Price FFJ01 Sit-to-Stand Activity Center are not turning on?

Ensure the batteries are properly installed and that the battery compartment is closed securely. If the lights still don't work, try replacing the batteries with new ones.

The Fisher-Price FFJ01 Sit-to-Stand Activity Center is wobbling, how can I fix this?

Ensure all parts, especially the legs and seat, are assembled tightly and correctly. Double-check the assembly instructions to ensure nothing is missing or misaligned.