IColor ICTPTATTOOPRO Easy Tattoo PRO Transfer Paper User Manual
- September 11, 2024
- ICOLOR
Table of Contents
ICTPTATTOOPRO Easy Tattoo PRO Transfer Paper
“`html
Specifications:
- Product Name: IColorTM Easy Tattoo PRO Transfer Paper
- Part Number: ICTPTATTOOPRO
- Size: 8.27 x 11.67 inches (210 x 297mm)
- Available in A4 size
Product Information:
IColorTM Easy Tattoo PRO Transfer Paper is a transparent media
designed for use on various substrates and hard surfaces such as
candles, ceramic, glass, plastic, toys, luggage, and skin. It is
thinner and softer compared to previous versions, providing a
comfortable experience for the wearer. The semi-matte finish
enhances design clarity while maintaining durability.
This product is compatible with IColorTM transfer printers and
many popular laser or LED printers. It is recommended to use an
IColorTM printer in white overprint mode for optimal results.
Usage Instructions:
-
Place the semi-matte transfer sheet into the appropriate tray
of the printer with the print side facing up. -
Adjust printer settings in the RIP software according to the
paper type and print mode. -
Print the image ensuring it is set to mirror print for correct
orientation upon transfer. -
Locate the adhesive sheet and remove the backing paper by
rubbing over it with a squeegee or ruler. -
Cut around the design precisely using scissors or cutters.
-
Remove the clear protective backing from the transfer
paper. -
Position the tattoo face down on clean, dry, and oil-free skin,
pressing down firmly for a good transfer.
For video instructions, visit www.icolorprint.com/video
FAQ:
Q: Can I use IColorTM Easy Tattoo PRO Transfer Paper on
fabrics?
A: The product is designed for use on hard surfaces and skin.
Using it on fabrics may yield poor results.
Q: Can I reuse the transfer paper?
A: It is recommended to use each transfer paper for a single
application to ensure optimal results.
Q: How should I store the transfer paper?
A: Store the transfer paper in a cool, dry place away from
direct sunlight to maintain its quality.
“`
TM
IColorTM Easy Tattoo PRO Transfer Paper
Part # ICTPTATTOOPRO (8.27″ x 11.67″) (210 X 297mm)
AVAILABLE IN A4 SIZE
IColorTM Easy Tattoo PRO Transfer Paper is an easy to use, transparent media
for use on various substrates and hard surfaces such as candles, ceramic,
glass, plastic, toys, luggage and of course, skin! This enhanced version is
noticeably thinner and softer, providing a more enjoyable experience for the
wearer. Easy Tattoo PRO Paper also has a semi matte finish which enhances the
clarity of your designs. All with the same great durability as compared to
UNINET’s other papers.
This product was specifically designed to work with all IColorTM transfer
printers, and will also work with many popular laser or LED printers – please
check with your printer manufacturer for compatibility. The use of an IColorTM
printer in white overprint mode is highly suggested.
INSTRUCTIONS FOR BEST RESULTS:
-
Place semi matte transfer sheet into the appropriate tray of the IColorTM printer. The slicker, coated side of this media is the print side. The glossy page is the adhesive sheet and should NOT be run through your printer.
· IColorTM 650 / 600 / 500 / Most OKI Printers: Print side face up in Multipurpose Tray · IColorTM 560 / 550 / 540 / 800: Print side face down in the Bypass Tray -
Printer Settings: In the RIP software settings, choose the paper type according to the printer being used. Make sure you are working within the overprint queue in the ProRIP software or
B’ Configuration if using the TransferRIP software. Specific print modes and sizes for this paper are available when using the IColorTM ProRIP software. o Listed asUNINET IColor Easy Tattoo’ o The page size should be set to A4.
Otherwise, use the following settings based on the printer: · IColorTM 650 / 600 / 500 / Most OKI Printers: Set media type toTransparency’ and media weight toUltra
Heavy 1′ · IColorTM 550 / 540: Set paper type toThick to 163g’ · IColorTM 560: Set paper type toThick to 105g’ · IColorTM 800: Set paper type to `Thick to 163g’ (Thick to 220g may be needed for extra heavy coverage)
If not already done automatically in the RIP, remember to set the job to mirror print, ensuring the correct orientation when transferred to the substrate. White overprint should be set to at least 200% (use default ProRIP settings when possible).
1 -
If using the IColorTM TransferRIP or ProRIP Software, add 200% 300% white overprint if applying to clear or dark surfaces. IColorTM 560 / 550 / 540: Do not exceed 280% white overprint · Completely black images do not require a white overprint, and it is suggest to print in rich black (CMYK) or composite black (CMY) for best results.
-
Print the image. 5) Locate the adhesive `B’ sheet.
· Peel back a corner of the white backing paper and fold it over. -
Place the Transfer
A’ sheet face up (printed side up) on a flat surface. · Stick the exposed adhesive corner precisely on the corresponding corner of theA’ sheet. -
Use a squeegee, ruler or something similar and push the `B’ adhesive backing paper away by rubbing over it.
· Rub the adhesive down by hand to ensure a good bond between the image and the adhesive. · The adhesive is now applied and the tattoo paper is ready for transfer.
2 -
Cut around the design as exact as possible. You can use a pair of scissors or most cutters/plotters.
-
Remove the clear protective backing 10) Position the tattoo face down on clean, oil free and dry skin. We recommend shaving the area for best
results. Press down well to ensure a good transfer. -
Soak the Tattoo with a damp sponge until completely wet. · Apply light pressure to the tattoo.
3 -
After the image is sufficiently soaked with water, it is ready to be peeled off. · It’s ready when the backing paper can be moved with minimal force.
· Hold the media on the skin or substrate at the point of contact and slowly
pull the liner away in one smooth motion.
13) Align the image on the skin or substrate if necessary. · Brush it with
your finger or a piece of plastic to remove any creases or air bubbles.
14) Use a towel to remove any excess water and let dry. May require 12 24
hours to dry completely. The tattoo with strengthen as it dries.
To see video instructions for IColorTM Easy Tattoo Transfer Paper visit
www.icolorprint.com/video
Avoid Jams:
TECH TIPS
· Allow your media to acclimatize do not use the media if just delivered,
especially during periods of extreme temperatures or humidity. Allow it to
come to room temperature before using.
· Do not print too close to the edges of the media. Leave a border of
approximately ½” between your artwork and the edge of the media.
· Be sure to use the suggested paper type and media type before printing.
· Always make sure you select the media size which matches the media being
used and is appropriate for your printer.
· The tattoo has a very strong adhesive. Depending on the design, size and
placement of the tattoo, the durability is about 2-4 days.
· If you wish to remove your tattoo, you can simply use sticky tape / scotch
tape or baby oil and rub it off.
· For a more matte looking appearance, you can rub baby powder or matte
sunscreen carefully over your new tattoo.
Optimal Humidity Level: 45% – 65% · Regulated with A/C, a humidifier or de- humidifier, depending on current atmospheric conditions.
Optimal Temperature Range: 50°F / 10°C – 75°F / 24°C
Use of this media outside of these recommend parameters may lead to poor results.
4
ALSO AVAILABLE:
· IColorTM Premium 2 Step Transfer Paper for light and dark colored garments ·
IColorTM Select and Select Ultra Bright 2 Step Transfer Paper for light and
dark colored garments · IColorTM Standard 2 Step Transfer Paper for light and
dark colored garments · IColorTM Glitter Adhesive 2 Step Transfer Paper (for
use with IColorTM Standard 2 Step Transfer Paper) · IColorTM Light 1-Step
Transfer Paper for light colored garments · IColorTM Presto 2 Step Transfer
Paper for textiles and hard surfaces · IColorTM Temporary Tattoo 2 Step and
Easy Tattoo Transfer Paper · IColorTM Premium and Wood and Leather Hard
Surface 1-Step Transfer Paper · IColorTM AquaClear 1-Step Transfer Paper for
candles and other substrates not resistant to heat · IColorTM Label / Sticker
Paper (Clear and White) in Letter and Tabloid size · IColorTM Window Cling
Media (Clear and White) in Banner and cut sheet options · IColorTM Banner
Paper · IColorTM Magnetic Media in Letter and Tabloid size …and more! Contact
your dealer for more information.
IColorTM Transfer Paper Comparison Charts
June 2024 Revision – A newer version of this manual may be available at
www.icolorprint.com/support (Or scan this QR Code)
5