ICoLor 540 Digital Color White Media Transfer Printer User Guide

June 13, 2024
ICOLOR

Digital Color + White Transfer Printer
Quick Start Guide

540 Digital Color White Media Transfer Printer

For detailed instructions, please refer to the Uninet IColor 540 Printer User Manual and the Uninet IColor® ProRIP User Manual

  1. Remove The Packing Materials And Check the ComponentsICoLor 540 Digital Color White Media Transfer Printer - Components
  2. Remove Orange Tape
    • From all sides
    • Then open the top lid![ICoLor 540 Digital Color White Media Transfer Printer
  • Components1](https://manuals.plus/wp-content/uploads/2023/09/ICoLor-540 -Digital-Color-White-Media-Transfer-Printer-Components1.png)

    1. Remove Orange Security Tape Inside Printer

    2. Remove White Cartridge and…
      • Remove protective foam from inside the machine and protective film from the white cartridge and reinstall. • If operating in a 110v environment, connect the power transformer.
      Ensure the input voltage on the back of the transformer is set to ‘115’ using the red switch
      ICoLor 540 Digital Color White Media Transfer Printer -
switchInsert power cord in the back of the machine and plug into power.

    3. Using one of the provided cables (Network or USB), connect the printer to your PC (USB) or router/switch (network).
      • To set a static IP address for the printer, please refer to the IColor 540 User Manual.

    4. The Uninet
      IColor 540 Digital Color + White Transfer Media Printer Has THREE Configurations To Suit Any Printing Project These coincide with the ‘Print Queues’ in the iColor ProRIP (Step 14)

A. Standard CMYK| B. Spot Color Underprinting.
(Typically used for right side reading applications.)| C. Spot Color Overprinting (Typically used for reverse
printing applications.)
---|---|---
| |
7. Install the Uninet IColor ProRIP (stored on the provided dongle
• Choose your language and follow the install steps
Please disable/uninstall any Anti Virus software before installation of the UNINET ProRIP SetUp
Application Type. Choose either 32-bit or 64-bit application type. To Continue, select Next. I Color Prorupt Setup
Install Shield Wizard for IColor Prorupt The Install Shield Wizard will install I Color Prorupt on your computer. To Continue, select Next. I Color Prorupt Setup
License Agreement Please read the following license agreement carefully. If you agree, Accept and select Next. IColor Prorupt Setup
Installation Choices Choose ‘Full install of iColor Prorupt’ and select Next. IColor ProRIP Setup
Choose Destination Location. Select folder where setup will install files. To Continue, select Next. IColor ProRIP Setup
Select Program Folder. Please select a program folder. Setup will add program icons to the Program Folder listed below. You may type a new folder name, or select one from the existing folders list. Select Next to continue. I Color Prorupt Setup
Agree to license terms and select Install.

  1. Unanet I Color Prorupt software
    First time Setup
    • Ensure the Prorupt dongle is inserted and you are connected to the internet (required)
    • Launch the software
    • Set unit of measure and decimal places, then select OK.ICoLor 540 Digital
Color White Media Transfer Printer - software

  2. Prorupt opens, the Queue Wizard will begin the installation of the support files for your I Color 540 printerICoLor 540 Digital Color White Media Transfer Printer - software1

  3. Select the IColor 540 printer from the support menu and select ‘OK’

  4. Device package Search
    • Select ‘Search’ for new printer package
    • Select ‘Next’ to continue the installationICoLor 540 Digital Color White
Media Transfer Printer - software3

  5. Select your ‘Port’ from the menu
    • Network or USB (Choose TCP/IP for network)
    – If connected via USB, choose the printer as identified in the drop down menu. 13. Port Configuration (network)
    • If connected via network, once TCP/IP is selected, the software will poll your network for available printers.
    Be sure to set a static IP address for your printer so that the IP addres does not change later. If this occurs, you will need to repeat this step – If you need to change or reset the ports in the future: Click Queue >> Manage Queues to view, update or change the port settings.

  6. Select the proper Print Queue for your project
    A. Select your ‘Print Que’ and ‘Print Mode’
    – The ‘Print Modes’ have preset values for white coverage, choke, paper size, paper tray and mirror settings These can be modified as neededICoLor 540
Digital Color White Media Transfer Printer - software715. Import + Print Graphic
    A. Three ways to import graphics
    – 1. Select the ‘green plus’ icon and navigating to the proper folder.
    – 2. Select File > Import File
    – 3. Simply dragging and dropping your file into the queue
    B. Select the desired file
    C. Select ‘Print’ icon in the menu bar.

ICoLor 540 Digital Color White Media Transfer Printer -
software8

Icolorprint.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ICOLOR User Manuals

Related Manuals