SEACHOICE 19483 Portable Aerator Baitwell System Instruction Manual
- September 10, 2024
- SEACHOICE
Table of Contents
19483 Portable Aerator Baitwell System
“`html
Product Information
Specifications
-
Model: 19483
-
Flow Rate: 350 GPH
-
Dimensions: 11.69in x 4.98in x 4.35in (297.0mm x 126.6mm x
110.6mm) -
Features: Fully adjustable spray head, suitable for fresh and
saltwater use, premium materials
Product Usage Instructions
Installation
-
Clean the surface where the pump will be placed.
-
Press the pump suction cups firmly in place.
-
Trim the spray tube if necessary.
-
Connect the wires to the battery using the provided battery
clips. -
Ensure wire connections are waterproof and out of the
water. -
Attach the black lead to the negative (-) side of the battery
and the brown lead to the positive (+) side. -
Install a 2.0 amp fuse in the positive lead close to the
battery.
FAQ
Q: Can this pump be used with corrosive substances?
A: No, this pump is designed for use with fresh and saltwater
only. Using it with corrosive substances can damage the pump and
surrounding environment.
Q: How do I adjust the water flow rate?
A: The pump comes with a fully adjustable spray head that allows
you to set the rate of water flow according to your needs.
Q: What gauge wire should I use for installation?
A: For installations under 20 feet, use 18 gauge wire. For
installations over 20 feet, use 14 gauge wire.
“`
Aerator/Pump System Manual
KIT INCLUDES
350 GPH pump / Tube clips / Suction cup base Battery clips / Aerator tube /
Hosepipe
19483
1
FEATURES
Aerates any portable livewell / baitwell bucket or cooler. A fully adjustable
spray head to set the rate of water flow. Move more water and oxygen into
livewell tanks to keep fish active. Cooler-running motors, premium materials,
watertight seals and waterproof wiring.
WARNING
This pump is designed for use with fresh and salt water. Use with any other
medium, including particularly hazardous, caustic or corrosive substance,
could result in damage to the pump, the surrounding environment and injury to
persons or property, including possible exposure to hazardous substances.
INSTALLATION
1. Clean surface of sand, grease, etc and press pump suction cups firmly in
place. 2. Spray tube may be removed and shortened if necessary. 3. If battery
is close enough, clip wires to the battery with the battery clips provided. If
additional lengths of
wire are needed, use 18 gauge wire. On installation over 20 feet, use 14 gauge
wire. Make sure all wire connections are completely waterproof, and out the
water. 4. The black lead is negative (-). Attach the black lead to the
negative (-) side of the battery. The brown lead to the positive (+) side of
the battery. Install a 2.0 amp fuse in the positive (+) lead as close to the
battery as possible.
11.69in 297.0mm
4.98in 126.6mm
4.35in 110.6mm
Dimension
2