PHILIPS PDZG-E Wireless Gateway Installation Guide
- September 16, 2024
- Philips
Table of Contents
PDZG-E Wireless Gateway
“`html
Product Information
Specifications:
- Model: PDZG-E Wireless Gateway
- Input: 5V DC 1A
- Dimensions: 70mm x 48mm x 101mm
- Weight: 90g
- Ports: LAN1, LAN2, RJ45
Product Usage Instructions
Installation:
Devices must be installed by a qualified electrician in
accordance with all national and local electrical and construction
codes and regulations.
De apparaten moeten worden aangebracht door een gekwalificeerde
elektricien en in overeenstemming met alle nationale en
plaatselijke elektriciteits- en bouwvoorschriften.
Connecting the Gateway:
-
Connect the power adapter to the 5V DC input on the
gateway. -
Use LAN cables to connect devices to LAN1 and LAN2 ports on the
gateway. -
If required, connect to the network using the RJ45 port.
Powering On the Gateway:
- Press the power button to turn on the gateway.
- Wait for the indicator lights to show a stable connection.
FAQ
Q: How do I reset the gateway to factory settings?
A: To reset the gateway, locate the reset button (PUSH) and hold
it for 10 seconds until the lights flash.
Q: What do the indicator lights signify?
A: The indicator lights show the status of the connection. A
stable light indicates a successful connection.
“`
PDZG-E Wireless Gateway
Installation Instructions
Instructions d’installation Installationsanweisungen Instrucciones de
instalación Istruzioni per l’installazione Installatie-instructies
Devices must be installed by a qualified electrician in accordance with all
national and local electrical and construction codes and regulations.
Les appareils doivent être installés par un électricien diplômé conformément à
tous les codes et réglementations électriques et de construction nationaux et
locaux.
Die Geräte sind von einem qualifizierten Elektriker in Übereinstimmung mit
allen geltenden Vorschriften zu installieren.
Los dispositivos deben ser instalados por un electricista calificado y
cumpliendo todas las normas y regulaciones, tanto nacionales como locales,
sobre instalaciones eléctricas y obras.
I dispositivi devono essere installati da un elettricista qualificato in
conformità con le norme locali e nazionali vigenti in materia di costruzioni
edilizie e installazione di impianti elettrici.
De apparaten moeten worden aangebracht door een gekwalificeerde elektricien en
in overeenstemming met alle nationale en plaatselijke elektriciteits- en
bouwvoorschriften.
/
.
34 mm (1.3 in)
26 mm (1.0 in)
x 2
–
5V DC 1A
LAN1
LAN2
70 mm (2.75 in)
48mm(1.9in) 48mm(1.9in) 96 mm (3.8 in) 101 mm (4 in)
5 mm (0.2 in)
90 mm (3.5 in)
RJ45
PUSH
1
PDZG-E
<10 m (33 ft)
90 mm (3.5 in) 2
96 mm (3.8 in)
<10 m (33 ft)
T4 x 22 mm (0.87 in)
45° C (113° F) -20° C (-4° F)
80%
2-20 m (6.6 – 65.6 ft)
3
4
–
5VDC/1A
LAN1
LAN2
RJ45 port
5
6
Power (LED on)
LAN connection
Cloud connection (not used)
QR code
DÉCLARATION DE CONFORMITÉ À LA FCC/IC
Ce dispositif est conforme à la partie 15 des règles de la Federal
Communications Commission (FCC) des États-Unis et d’Industrie Canada (IC)
exempts de licence RSS norme(s). Son fonctionnement est assujetti aux deux
conditions suivantes: (1) Ce dispositif ne doit pas provoquer de brouillage
préjudiciable, et (2) il doit accepter tout brouillage reçu, y compris le
brouillage pouvant entraîner un mauvais fonctionnement. Tous les changements
ou modifications non expressément approuvés par Signify, sont susceptibles
d’annuler le droit de l’utilisateur à se servir de cet équipement. Ce produit
est exclusivement destiné à un usage commercial
Cet équipement est conforme aux limites d’exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 200 mm de distance entre la source de
rayonnement et votre corps.
FCC/IC compliance statement This device complies with part 15 of the FCC
rules for the United States and Industry Canada (IC) license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by Signify
could void the user’s authority to operate this equipment. This product is
intended for commercial use only.
FCC Radiation Exposure Statement This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment must
be installed and operated with a minimum distance 200 mm between the radiator
and your body.
IC Radiation Exposure Statement This equipment complies with IC RSS-102
radiation exposure limits set forth for an uncontrolled environment. This
equipment must be installed and operated with a minimum distance 200 mm
between the radiator and your body.
RF Exposure Information This device meets the EU requirements (2014/53/EU)
on the limitation of exposure of the general public to electromagnetic fields
by way of health protection. The device complies with RF specifications when
the device used at 321 mm from your body.
FCC and RSS-210 of IC (Industry Canada) Rules This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules and pursuant to RSS210 of the IC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help. Any modifications not approved by the manufacturer of
this device could void the user’s authority to operate this device.
Real time clock function uses a non-replaceable battery.
This device contains open-source software. To view the acknowledgements,
license texts, and written offer, open the device’s IP address in any web
browser connected to the same local network.
Hereby, Signify declares that the radio equipment type LCN1870 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following Internet address: www.philips.com/red
© 2024 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
www.dynalite.com
AZZ 581 0524 R04