Fisher-Price GMN58 Soother & Sleep Hoppy Dreams Instruction Manual

Fisher-Price GMN58 Soother & Sleep Hoppy Dreams

Before You Begin

• Keep this instruction sheet for future reference, as it contains important information.
• Requires four AA batteries (included). The batteries included are for demonstration purposes only.
• Battery replacement is required. Only adults should replace batteries. Tool required for battery replacement: Phillips screwdriver (not included).
• For longer life, use alkaline batteries.
• Some features of this product only work with the Fisher-Price® Smart Connect™ app.
• You can download the Fisher-Price® Smart Connect™ app to control the soother from your smart device (not included). After downloading, launch the app and be sure to follow the app instructions to pair and connect your device to the soother.
• The Fisher-Price® Smart Connect™ app is compatible with most newer iOS and Android™ devices. Visit fisher-price.com/SmartConnect/for a list of compatible devices.

Replace Batteries

• Open the fasteners on the back of the bunny and pull to remove the electronic unit.
• Loosen the screw in the battery compartment door with a Phillips screwdriver and remove the door.
• Remove the exhausted batteries and properly dispose.
• Insert four, new AA (LR6) alkaline batteries.
• Replace the battery compartment door and tighten the screw. Do not over-tighten.
• When sound or light from this toy becomes faint or stops, it’s time for an adult to change the batteries.
• You may need to reset the electronics if this toy begins to operate erratically. Remove the batteries and reinstall them.
• When finished replacing batteries, replace the electronic unit inside the bunny. Be sure the speaker/button is facing the front of the bunny. Close bunny’s fasteners.

CONTACT INFORMATION

• UNITED STATES 1-800-432-5437. Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
• CANADA Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
• CHILE Mattel Chile, S.A., Avenida Américo Vespucio 501-B, Quilicura, Santiago. Tel.: 1230-020-6213.
• VENEZUELA Servicio al consumidor Venezuela: Tel.: 0-800-100-9123.
• ARGENTINA Mattel Argentina, S.A., Av. Libertador 1000, Piso 11 – Oficinas 109 y 111, Vicente López – Prov. Buenos Aires. Tel.: 0800-666-3373.
• COLOMBIA Mattel Colombia, S.A., Calle 123#7-07 P.5, Bogotá. Tel.: 01800-710-2069.
• AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
• ASIA Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
• MALAYSIA Diimport & Diedarkan Oleh: Mattel Continental Asia Sdn Bhd. Level 19, Tower 3, Avenue 7, No. 8 Jalan Kerinchi, Bangsar South, 59200 Kuala Lumpur, Malaysia. Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
• SOUTH AFRICA Mattel South Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196.

Apple, & the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.

©2020 Matt el. ® and ™ designate U.S. trademarks of Matt el, except as noted.

PRINTED IN CHINA

GMN58-4B70-1102284856-4LB

CONNECTION

Pair Bunny to Your Smart Device

• Before using the Fisher-Price® Smart Connect™ app to control bunny, it must be paired with your smart device (not included).
• Open the Fisher-Price® Smart Connect™ app on your smart device. If this is the first time using the Smart Connect™ app, you will have to create a log in.
• Open bunny’s fasteners and slide the power switch ON.
• In the app, choose this product and then press the pairing button on Bunny’s electronic unit. Pairing may take up to 30 seconds and you’ll see that you’re connected in the app!
• Once you’ve paired your smart device to Bunny, you do not need to pair again.
• If you cannot pair your smart device to Bunny, try moving the device closer and make sure your wireless and Bluetooth connections are enabled on your device.
• Close bunny’s fasteners.

Ahhh, soothing music!

Open the fasteners on the back of the bunny. Slide the power switch to ON to turn off demonstration mode. Close bunny’s fasteners.

• Bunny can be used without the app!
• Press the bunny’s belly to activate the 20-minute Ready, Settle, Sleep™ playlist.
• Press and hold the bunny’s belly to turn it OFF.
• In the Ready cycle, music plays with lights for approximately 10 minutes; followed by the Settle cycle with sounds and lights for approximately 6 minutes; and finally the Sleep cycle with sounds only for approximately 4 minutes.

Customize Settings

• Touch to customize the bunny’s settings.
• Touch to setup your child’s sleep trainer schedule. See the next page for more information.
• Touch to start lights/music/sounds.
• Touch to learn more about this app and the features of this product.

Setup Training

• Choose a sleep start time for the day selected at the top of the screen.
• Touch to advance to the next day. In order to use this function properly, you must set a sleep and wake schedule for every day of the week.
• Choose a wake time for the next day.
• Touch to set the same schedule for all days of the week.

Setup Training

• Touch to select a duration for your child’s nap time.
• Your light and sound choices will start with a press of the bunny’s tummy.
• You can start or stop Bunny at any time by pressing this button again.

Time to Go to Bed

A red belly means it’s time to sleep.

• A press of the bunny’s belly lets your child know when it is time to sleep or time to wake up.
• If the current time is between the sleep start time and wake time, it’s not time to get up. Bunny’s belly turns red and soothing music starts. Back to sleep!
• If the current time is after wake time, a press of the bunny’s belly turns it green. Time to get up!

Time to Get Up

A green belly means it’s time to wake up!

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable.
• Insert batteries as indicated inside the battery compartment (+ and -).
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

Care

• This toy is machine washable without the electronic unit. Do not immerse the electronic unit.
• Open the fasteners on the back of bunny and remove the electronic unit.
• Machine wash in cold water, with a gentle detergent on the gentle cycle.
• Do not use bleach. Tumble dry on low heat.
• When replacing the electronic unit, be sure the speaker/button faces the front of the bunny.

FCC STATEMENT

(UNITED STATES ONLY)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.

CAN ICES-3 (B)/NMB-3 (B)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This product is homologated by ANATEL in accordance with the procedures regulated by Resolution n. 242/2000 and meets the technical requirements applied. This equipment is not subject to the protection from harmful interference and may not cause interference with duly authorized systems. For more information, see the ANATEL website – www.anatel.gov.br

FREQUENTLY ASKED QUESTIONS

What is the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams?

The Fisher-Price GMN58 Soother & Sleep Hoppy Dreams is a plush toy designed to help soothe and comfort infants and young children. It features a light-up belly and can be controlled via the Smart Connect App.

How much does the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams cost?

The Fisher-Price GMN58 Soother & Sleep Hoppy Dreams is priced at $29.91.

What are the dimensions of the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams?

The product dimensions are 4.75 x 2.25 x 17.75 inches.

What is the item model number for the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams?

The item model number is GMN58.

What type of batteries does the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams require?

The Fisher-Price GMN58 Soother & Sleep Hoppy Dreams requires 4 AA batteries.

What material is the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams made of?

The Fisher-Price GMN58 Soother & Sleep Hoppy Dreams is made of plush material.

What are the additional features of the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams?

The Fisher-Price GMN58 Soother & Sleep Hoppy Dreams features a light-up belly and can be controlled via the Smart Connect App.

How much does the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams weigh?

The item weighs 6.9 ounces.

How does the Smart Connect App enhance the use of the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams?

The Smart Connect App allows parents to control the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams remotely, adjusting settings and features to better suit the child's needs.

Can the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams be washed?

The plush material may be surface washable, but it's best to refer to the care instructions provided with the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams to ensure proper cleaning.

What is the purpose of the light-up belly feature on the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams?

The light-up belly feature is designed to provide a soothing visual element that helps comfort the child, especially during bedtime.

How can the Fisher-Price GMN58 Soother & Sleep Hoppy Dreams be used to help with sleep routines?

The Fisher-Price GMN58 Soother & Sleep Hoppy Dreams can be used to create a calming environment for bedtime, with features like soothing lights and sounds that help signal bedtime and promote relaxation.

Why is my Fisher-Price GMN58 Soother & Sleep Hoppy Dreams not turning on?

Ensure that fresh batteries are installed. Check that the battery compartment is securely closed and the batteries are inserted with the correct polarity (+/-).

The sounds on my Fisher-Price GMN58 Soother & Sleep Hoppy Dreams are not working. What could be wrong?

Check if the volume setting is too low or turned off. If the sound remains off, try replacing the batteries, as low battery power can affect sound functions.

Why is my Fisher-Price GMN58 Soother & Sleep Hoppy Dreams turning off too soon?

This could be due to the built-in timer. Ensure that the timer is set to the desired duration, and if the issue persists, check the batteries for power levels.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Fisher-Price GMN58 Soother & Sleep Hoppy Dreams Instruction Manual

REFERENCES

Fisher-Price GMN58 Soother & Sleep Hoppy Dreams Instruction Manual- Device.Report

Fisher-Price GMN58 Soother & Sleep Hoppy Dreams Instruction Manual- wiki

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>