GIMA 6475 Electronic Baby and Child Scale User Manual

: June 4, 2024
: GIMA

Table of Contents

GIMA 6475 Electronic Baby and Child Scale
TECHNICAL SPECIFICATION
IMPORTANT SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
OPERATING BUTTONS
USING THE SCALE
ENVIRONMENTAL PROTECTION
Disposal
GIMA WARRANTY TERMS
Symbols
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

GIMA 6475 Electronic Baby and Child Scale

Imported by: Gima S.p.A Via Marconi, 1 – 20060 Gessate (MI) – Italy gima@gimaitaly.com – expotr@gimaiatly.com – www.gimaitaly.com
Made in Hungary
Thank you for choosing our product. Your electronic baby scale is a sensitive measuring instrument, therefore please protect it from overload and from big dynamic loads! Never leave your baby unattended on the tray! Please, read the instruction for use before using the scale. Your new electronic baby scale has been designed for measuring your baby’s weight and displaying his/her weight difference.

TECHNICAL SPECIFICATION

Removable plate for double use (babies – children)
Precision measuring system
Display of weight difference (before and after feeding)
Tare function
Low battery indicator (“Lo”)
Auto power off
Kg/lb/st. selection function

Technical parameters

IMPORTANT SAFETY INSTRUCTIONS

Make sure you follow the marked polarity of the battery when inserting and replacing it.
If the appliance will be out of use for a longer time, remove the battery.
Do not leave the unit unattended when in use.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Use the product only for the intended purpose specified in the Operating Manual.
Use the unit only on a stable horizontal surface.
Before cleaning, assembly, or disassembly of the cover, switch the unit off and remove the battery!
Do not use abrasive or chemically aggressive substances for cleaning the unit.
Do not use the unit if it does not operate properly, or if it has been dropped, damaged or exposed to any liquids. Take the unit to an authorized service center for testing and repair.
The unit is suitable for domestic use only. It is not designed for commercial operation.
Keep the unit away from heat sources, such as radiators, ovens etc. Do not expose the unit to direct sunlight or moisture.
Do not touch the unit with wet or damp hands.
The product is a fragile measuring device. Prevent it from crashing or falling.
Do not repair the appliance yourself. Contact an authorized service center.
FAILURE TO FOLLOW THE MANUFACTURER’S INSTRUCTIONS MAY LEAD TO REFUSAL OF WARRANTY REPAIR!

PRODUCT DESCRIPTION

Weighing surface (baby tray)
ON/OFF button
TARE button
Kg/Lb/St button
Display

OPERATING BUTTONS

The scale can be switched on and off with the ON/OFF button. (Push the button once.)
With the TARE button, you can use the tare function. “0.00” appears on the display 2 seconds after pressing the button. If you don’t need the weight difference to be shown, then by pressing the TARE button for 3 seconds the memory can be deleted. “M” will disappear from the display.
Kg, Lb, St button is suitable to choose the required unit of measurement, the actual unit of measurement can be seen on the right side of the display.

USING THE SCALE

These scales run on 2pcs of replaceable lithium batteries. Remove the protective film before use (Fig. 1).
Before weighing a baby, snap the tray to the measuring surface so the tray would stand stable (Fig. 2).
There is no need for installing the tray if you want to weight a child.
By pressing the ON/OFF button once “0.00” appears on the display (Fig.3).
Place the baby or stand the child on the scale.

MEMORY FUNCTION
After switching on the scale, an “M” is displayed which means that the last measured weight is stored in the memory, so that the weight difference could be displayed. If you don’t need the weight difference to be shown, then by pressing the TARE button for 3 seconds the memory can be deleted. “M” will disappear from the display. If you take out the batteries, then the memory will also be deleted.
ABOUT TARING
If you use not only the tray and the added weight (blanket, pillow, etc.) is lighter than 5 kg, after pressing the TARE button the screen displays “0.00” and the maximal measurable weight will be 20 kg.
If the added weight is heavier than 5 kg, after pressing the TARE button the screen displays “0.00” but the maximal measurable weight will be less than 20 kg (more precisely: 20 kg minus the added weight).
OTHER INFORMATION ON THE DISPLAY
If the “LO” warning is displayed after switching on (Fig. 4), or there is nothing on the display, the battery is dead and has to be replaced. If the sign “Err” appears on the display (Fig. 5.), it means that the scale is overloaded, in this case, the weight must be reduced ( an overload can cause sensor faults). If the message “OUT2” appears on the display (Fig. 6.), it means sensor fault (after overloading or after a sudden, big dynamic load). In this case, we have no warranty liability for the product.
CLEANING REPAIR AND MAINTENANCE
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects as they may damage the unit’s surface! Never clean the unit under running water, do not rinse it, and do not submerge it in the water! Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert service center.

ENVIRONMENTAL PROTECTION

Packaging materials and obsolete appliances should be recycled.
The transport box may be disposed of as sorted waste.
Polyethylene bags shall be handed over for recycling.

Disposal

The product must not be disposed of along with other domestic waste. The users must dispose of this equipment by bringing it to a specific recycling point for electric and electronic equipment.

GIMA WARRANTY TERMS

The Gima 12-month standard B2B warranty applies.

Symbols

Product code
Lot number
Keep in a cool, dry place
Keep away from sunlight
Follow instructions for use
Date of manufacture
Product complies with European Directive
Caution: read instructions (warnings) carefully
WEEE Disposal