Prokits SI-B165-K Cordless Soldering Iron User Manual

SI-B165-K Cordless Soldering Iron

“`html

Specifications:

• Consumption Temperature: 12W 500

• Working Automatic Shutdown: Touch switch 30s no touch the
  switch

• Operation Time: Approx. 1.5h

• Charging Time: Approx. 2h

• Battery Model: 3.7V 2200mAh Li-ion 18650

• Charging Port: USB Type-C

• Size (mm): 190x25x29mm

• Soldering Iron Weight(g): Approx. 85g

Product Usage Instructions:

1. Preparation:

Before using the Cordless Soldering Iron, make sure to file off
any dirt, rust, or paint on the part you wish to solder.

2. Heating the Part:

Turn on the soldering iron and heat the part you want to solder
with the tip of the iron. Ensure the part reaches the desired
temperature for soldering.

3. Applying Solder:

Apply rosin-based solder to the heated part and melt it using
the soldering iron. If using non-rosin-based solder, apply
soldering paste to the part before adding the solder.

4. Cooling and Handling:

Allow the solder to cool and harden before moving the soldered
part. Always handle the heated soldering iron with extreme care to
avoid burns or accidents.

Warnings:

• Always keep tips coated with tin for a longer service
  life.

• Handle the heated soldering iron with extreme care to prevent
  burns or fires.

• Place the tool on its stand when not in use to prevent
  accidents.

• Avoid exposing the appliance to shock, sunlight, or rain during
  transportation.

Frequently Asked Questions (FAQ):

Q: Can I use the product while it is charging?

A: No, the product cannot be used while charging. Please ensure
the soldering iron is disconnected from the charging port during
use.

“`

SI-B165 Cordless Soldering Iron User’s Manual
User’s Manual 1st Edition, 2024
©2024 Copyright by Prokit’s Industries Co., Ltd. 0

SI-B165 Cordless Soldering Iron User’s Manual

Thank you very much for purchasing Pro’skit SI-B165 Cordless Soldering

Iron. Please read this manual before operating the SI-B165. Please store the

manual in a safe, easily accessible place for future reference. This is a fully

functional USB Cordless Soldering Iron brings you more convenient.

Compact and slim for portability with rapid heat up and instant recovery.

Please read the following instructions. Specifications:
Consumption Temperature

12W 500

Working Automatic shutdown
Operation time Charging time Battery model Charging port Size (mm) Soldering iron weight(g)

Touch switch 30sno touch the switch
Approx. 1.5h Approx. 2h 3.7V 2200mAh Li-ion 18650 USB Type-C 190x25x29mm Approx. 85g

Replacement Tip: Model No. 5SI-B165-K —– Knife shaped.standard
5SI-B165-T—- Round tip

Features: · Cordless rechargeable soldering iron powered by battery, free for move. · Touch induction heating with finger, no heating when moved away hand. · Fast heating up in 10 seconds, quick cooling down if not use. · TIP and heating all in one easy to disassemble and replace. · Soldering iron can be operated for about 1.5 hours with full charged battery. · Display remaining battery time by 4 LED indicator. · Without operation for 30s automatic shutdown to save power. · LED lighting and Type-C charge port.

1

Contents: 1Soldering iron 1Micro soldering iron holder 1USB cord (TYPE-C USB) 1User’s manual Instructions:

1. Short press the function button to turn on the battery indicator light. Touch the induction area soldering iron with your finger to heat up, and the work indicator light will turn on. Move your finger away from the induction area heating light and it will turn off. The product will not heat up. Short press twice to turn off the device when it is turned on. 2) The product will automatically shut down after being turned on for 30 seconds without use. 3) Long press the function button for 3 seconds to turn on or off the LED auxiliary lighting. 4) When the low battery indicator light flashes during use, please charge it in a timely manner. The battery indicator light flashes when charging, and remains on when fully charged. 5)The product has protection against overcurrent, overvoltage, short circuit, overcharging, and over discharging, which can effectively protect the lifespan of lithium batteries.
   2

2. The product cannot be used while charging. How to solder: 1. File off any dirt, rust or paint on the part you wish to solder. 2. Heat the part with the soldering iron.
   3. Apply rosin-based solder to the part and melt it with the soldering iron. Note: when using non-rosin-based solder, be sure to applya soldering paste to the part before applying the solder.
   4. Wait for the solder to cool and harden before moving the soldered part.
   Warnings: Always keep tips coated with tin to ensure a long service life. Handle the heated soldering iron with extreme care, as the high
   temperature of the iron can cause fires or painful burns. This tool must be placed on its stand when not in use. This appliance is not intended for use by persons (including children)
   with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If the USB cable is damaged, please change in order to avoid a hazard. Battery instructions 1. Battery model: 18650 Li-ion 3.7V 2200mAh 2. Dimensions18x65mm 3. Default state of the battery The state of charge is at about 45%. The open circuit voltage is 3.700V~3. 750V.Because the battery will consume electricity by itself, 45% state of charge can’t be guaranteed when it reaches customers. Violent vibration,
   3

shock, exposure to the sun or rain during transportation must be avoided. 4. Life expectancy: Standard cycle and continuous use for 300 times before
the state of charge drops to 80% of its standard state of charge. 5. Temperature range during use:
Charging0~50<45 advised Discharging-20~ 65<60 advised
Instructions on proper using and handling of lithium batteries 1. Charging 1.1. Charging voltage must be set 4.2V/cell. Considering the voltage deviation
of the charger, charging voltage must be below 4.20V/cell. Even if under abnormal conditions, charging voltage should not be above4.225V/cell in order to avoid over-charging. Battery lifespan will be shortened by charging voltage above 4.2V, leading to cell failure and even serious safety problems. 1.2. Cell must be charged with CC (constant current) – CV (constant voltage) method. Do not use the continuous charging method. 1.3.When cell voltage is below 2.75V, Cell should be pre-charged with current below 0.2C. When cell voltage reaches over 3.0V, standard charge can begin. And if cell voltage never reaches 3.0V in 1 hour,charging should be stopped. 1.4.Charger should be able to monitor the charging status by timer, current detection or open circuit voltage detection. When charger detects the cell is fully charged, charging should be stopped.
2. Discharging
2.1. The discharge current of a cell must be below specified in the product specification :0.5C.
2.2.The discharge end voltage of a cell must be above specified in the product specification: 2.75V.
2.3. The cell should not be over-discharged below 2.5V. 2.4. The cell should be discharged within a range of temperatures specified in
the product specification.
3. Storage
3.1. The cell should be stored in a dry area and no corrosive gas. 3.2. Storage temperature
When stored within 1 month : -30°C ~ +60°C When stored within 3 months: -30°C ~ +45°C When stored within 12 months: -20°C ~ +25°C 3.3. The pack should be recharged to 45% SOC if the pack has never been used for one (1) year, this will avoid the cell voltage drop too low.
4

Safety Instruction 1. Use or charge the battery only in the stipulated application. 2. Use the correct charger for Lithium batteries.3. When connecting a battery pack to a charger, ensure correct polarity, do not reverse charge batteries. 4. Do not maintain secondary batteries on charge when not in use. 5. Never put a battery into water or seawater. 6. Don’t throw the battery into the fire. 7.Do not use or leave the cell under the blazing sun (or in heated car by
sunshine). The cell may generate heat, smoke or flame. 8.Do not dismantle, open or shred cells. 9.Do not solder directly to batteries. 10.Do not subject batteries to adverse condition such as extreme temperature,
deep cycling and excessive overcharge/over discharge. 11.Do not short-circuit batteries. Do not store batteries haphazardly in a box or
drawer where they may short-circuit each other or be short-circuited by conductive materials, permanent damage to batteries may result. 12.Do not incinerate or mutilate batteries, may burst or release toxic material. 13.Do not subject batteries to mechanical shock.
Warning!
1.1. When using a new battery or a battery to be used for the first time after long term storage, please fully charge the battery before using.
1.2. Prohibition of reverse charge Reverse charge is prohibited. Cells shall be connected correctly. The polarity has to be confirmed before wiring. If a cell is connected improperly, the cell cannot be charged. Simultaneously, the reverse charging may cause damage to the cell which may lead to degradation of cell performance and damage the cell safety, and could cause heat generation or leakage.
1.3. Do not mix our batteries with other battery brands or batteries of a different chemistry such as alkaline and zinc carbon.
1.4. Do not mix new batteries in use with semi-used batteries, which may result in over-discharge.
1.5. If find any noise, excessive temperature or leakage from a battery, please stop using.
1.6. When the battery is hot, please do not touch it and handle it, until it has cooled down.
1.7. Do not remove the outer sleeve from a battery pack nor cut into its housing. 1.8. When find battery power down during use, please switch off the device to
avoid over discharge. 1.9. After using, if the battery is hot, before recharging it, allow it to cool in a
5

well-ventilated place out of direct sunlight. 1.10. Do not attempt to take batteries apart or subject them to pressure or
impact. Heat may be generated or fire may result. 1.11. Keep the battery away from babies and children. If swallowed, see a
doctor immediately. 1.12. In the event of a cell leaking, do not allow the liquid to come into contact
with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Caution! 1. When not using a battery, disconnect it from the device. 2. Unplug a battery by holding the connector itself and not by pulling at its cord. 3. Used batters should be treated by authorized units. 4. After extended periods of storage, it may be necessary to charge and discharge the batteries several times to obtain maximum performance. 5. Keep batteries clean and dry. 6. When disposing of secondary batteries, keep batteries of different electrochemical systems separate from each other.
6

SI-B165

Pro’skitSI-B165 SI-B165 USB

12W 500

30s() 1.5h 2h 3.7V 2200mAh Li-ion 18650 USB Type-C

(mm) (g) :

190x25x29mm 85g

:5SI-B165-K—-()

5SI-B165-T—-

10 LED 1.5 30 LED Type-C

1 1
1USB (TYPE-C USB) 1

7

1
2 30 3 3 LED 4
5 6
1. 2. 3. , 4.

8

1.18650 Li-ion 3.7V 2200mAh 2.18x65mm 3. 45% 3.700V~3.750V
45% 4. 300 80% 5. 0~50<45 :-20~65<60

1. 1.1 4.2V/
4.20V/ 4.225V/ 4.2V 1.2 CC-CV 1.3 2.75V 0.2c 3.0V 1 3.0V 1.4 2. 2.1 0.5C 2.2 2.75V 2.3 2.5V 2.4 3. 3.1 3.2 1 -30°C~+60°C 3 -30°C~+45°C 12 -20°C~+25°C 3.3 1 45%
9

1. 2. 3. 4. 5. 6. 7.
8. 9. 10./ 11.
12. 13.

1. 2.
3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

10

1. 2. 3. 4. 5. 6. 7.
11

SI-B165

Pro’skit SI-B165 SI-B165

USB

12W

500

30s()

1.5h

2h

3.7V 2200mAh Li-ion 18650

USB Type-C

(mm)

190x25x29mm

(g)

85g

: :5SI-B165-K—-()
5SI-B165-T —-

10 LED 1.5 30 LED Type-C 1 1 1USB (TYPE-C USB) 1
12

1
2 30 3 3 LED 4
5 6
1. 2. 3.,
4.
13

1.18650 Li-ion 3.7V 2200mAh 2.: 18x65mm 3. 45% 3.700V~3.750V
45% 4. 300 80% 5. 0~50<45 :-20~65<60

1. 1.1 4.2V/
4.20V/ 4.225V/ 4.2V 1.2 CC-CV 1.3 2.75V 0.2c 3.0V 1 3.0V 1.4 2. 2.1 0.5C 2.2 2.75V 2.3 2.5V 2.4 3. 3.1 3.2 1 -30°C~+60°C 3 -30°C~+45°C 12 -20°C~+25°C
14

3.3 1 45% 1. 2. 3. 4. 5. 6. 7.
8. 9. 10./ 11.
12. 13.

1. 2.
3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

15

1. 2. 3. 4. 5. 6. 7.
16

SI-B165

()

() · ·
· (
) · · ·

17

13075 886-2-22183233 E-mail: pk@mail.prokits.com.tw / 136525 021-68183050 400 1699 629 : www.prokits.com.tw
PROKIT’S INDUSTRIES CO., LTD
http://www.prokits.com.tw Email: pk@mail.prokits.com.tw ©2024Prokit’s Industries Co., LTD. All rights reserved 2024002(C)
18

References

• Pro'sKit Official Website
• Pro'sKit Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>