iJOY 2AJQ7ELITE 2 In 1 Wireless Magnetic Charging Stand User Manual
- September 9, 2024
- iJOY
Table of Contents
iJOY 2AJQ7ELITE 2 In 1 Wireless Magnetic Charging Stand
Referenced brands and trademarks are for compatibility listing only, not associated with this product. All trademarks are registered to their respective owners. Apple®, iPhone®, Apple watch®, and Airpods® are licensed or registered trademarks of Apple Inc.
QUEST USA CORP.
495 Flatbush Ave Brooklyn, NY 11225
- © GOIJOY & IJOY are registered trademarks of QUEST USA CORP.
- All other trademarks and trade names are the property of their respective owners.
- Designed by GOIJOY & IJOY in New York. All rights reserved QUEST USA CORP.
Made in Malaysia.
LED LAMP STATUS INDICATION
The LED status appears as:
Once powered on, the blue light is on for 2 seconds, then off; the blue light
is on for 10 seconds then off once normal charging; the white light flashes
once/second, until the abnormal object is removed; fully charged, the blue
light is on for 5 seconds and then off. (No alerts for iPhone®)
NOTE:
The pictures involved in the manual are schematic diagrams, and the final
product is subject to the physical object: a wireless charger. USB cable.
instructions, no power adapter, if you need to purchase or use the original
mobile phone adapter, please use the QC2.0 adapter.
Safety Warning
- Do not squeeze or collide.
- Do not disassemble or put into the fire, or water, to avoid causing short circuit leakage.
- Do not use the wireless charger in severe high-temperature, wet, or corrosive environments to avoid leakage of damaged circuits.
- Do not place too close to the magnetic stripe or chip magnetic card (ID card, bank card, etc.), to avoid causing magnetic card failure.
- Please keep the distance between the implants. medical device (pacemakers, cochlear implants, etc.) and the wireless charger at least 20cm to avoid potential devices for the medical device.
- Children should be watched after to ensure that they don’t play with the wireless charger as toys to avoid unnecessary accidents.
- Please keep the charger and receiver away from water and other liquids.
- To clean the charger, ensure that the power supply is disconnected.
- Use the ambient temperature maintained at 0-45°C.
YOUR IJOY PRODUCT
Thank you for purchasing and using the “IJOY 2 IN 1 CHARGING STATION”. This product provides a high-quality charging experience. Before using this product, carefully read this manual to operate at maximum benefit.
Please ask your local dealer or call us if you have any questions.
- IJOY 2 1 Charging Station x 1
- USB-C Charging Cable × 1
- User Manual x 1
PRODUCT SPECIFICATIONS
- SIZE: 100MM + HEIGHT 141MM
- INPUT: 5V=3A | 9V=3A
- WORKING FREQUENCY: 110-205 KHZ
- CONVERSION EFFICIENCY: 75%
- TOTAL OUTPUT: 15W (MAX)
- WIRELESS OUTPUT FOR PHONE: 15W (MAX)
- WIRELESS OUTPUT FOR EARBUDS: 5W(MAX)
- CHARGE IS < 8MM
COMPATIBLE FEATURES
- Compatible with iPhone®: 12/12 Pro/12 Pro Max/12 Mini/13/13 Pro/ 13 Pro Max/13 Mini/14/14 Pro/14 Pro Max/14 Plus/15/15 Pro/ 15 Pro Max/15 Plus
- Compatible with AirPods®
OTHER IMPORTANT SAFETY INFORMATION
Disposal of old electronic & electronic equipment (Applicable in the European Union and other European Countries with separate collection systems) The trash can symbol (seen on the bottom) on the production indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for recycling of electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling. For more detailed information about this product, please contact your local household waste disposal service or the shop where you purchased this item.
PRODUCT DIAGRAM
The 2 in 1 charging station has a built-in magnetic mechanism for charging mobile phones. Its adjustable design allows for fine-tuning the height, providing a convenient and versatile charging experience.
FCC ID STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used under the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>