iJOY SPHERE IJ1015-DG Wireless Charger User Manual
- October 30, 2023
- iJOY
Table of Contents
iJOY SPHERE IJ1015-DG Wireless Charger
YOUR PRODUCT
Thank you for purchasing and using this wireless charger. This product can provide a high quality charging experience for your mobile phone. Before using this product, carefully read this manual to correctly operate this device. Please ask your local dealer if you hove any questions.
- 1 wireless charger
- 1 cable
- 1 user manual
PRODUCT SPECIFICATIONS
Inputs : DC 5V/2A; 9V/1.67A
Output : lOW (Mox)
Charging Efficiency : ≥75%
Charging Distance : ≤Bmm
Frequency : 113-205KHz
Before attempting to use thls, ensure that your mobile device is QI compatible
and supports wireless charging.
Compatible with : IPhoM Band above
Samsung Galaxy Note 5, Samsung Galaxy S7 Edge, Samsung Galaxy SB, Samsung
Galaxy SB+, Samsung Galaxy SS, Samsung Galaxy SS Edge, Nokia 1520, Nexus SLG
Devices needing reserved wireless charging interface (not included) next to
battery to work wlth charger: Samsung Galaxy S3/S4/S5/Note2/Note3/Note4, etc.
All devices must conform to Qi standard.
NOTE : Attachments on the back of your phone can impede the effectiveness
of the wireless charger:, and lead to overheating. Please remove attachments
from the phone before charging on this device.
People who use a heart pacemaker should consult a doctor before using this
product, and leave the charger at a distance o1′ 22cm from the pacemaker.
Electromagnetic waves can influence the effectiveness of the pacemaker.
USING YOUR PRODUCT
- Insert one end of the included Type C cable into the Type C port of the wireless charger.
- Plug the other end into an available USB part on your computer or a suitable USB wall adapter.
- The green light will turn on once when the charger is turned on.
- Place your 01 compatible smartphone on the charging surface of the wireless charger.
- For best results, make sure that your phone is as close to the center of the charging surface as possible.
- The blue light is on as your phone is charging.
- Remove your phone from the charging surface once charging is complete.
INSTRUCTIONS
- Never expose your wireless charger to high temperatures, extreme cold, high humidity, or any moisture or water.
- Do not let dust or other materials accumulate on the product.
- Do not charge in places where the sun shines directly or in high temperature.
- Do not lay magnetic cards or magnetic devices on the charger.
- Power off before cleaning.
- In order to avoid the risk of electronic shock, never attempt to open your charger or repair it without the assistance of certified professionals.
- Your wireless charger ls not recommended for use by children without adult supervision.
- When your smartphone is fully charged, remove it from the charger to avoid overcharging.
- Do not use your wireless charger at temperatures under 5’C or over 35″C.
- Do not drop your wireless charger, throw it, or subject it to strong physical impact. When charging, do not place your charger on flammable materials such as rugs, carpets, or bedding for safety.
- Only place QI compatible phones on the surface of your charger. The use of incompatible phones can cause your charger to overheat and damage it.
- Your charger may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30MHz.
- Please recycle or dispose of your wireless charger properly based on the laws and rules of your municipality.
- Make sure the charger is unplugged before cleaning it.
OTHER IMPORTANT SAFETY INFORMATION
To avoid danger of choking, please keep cables away from babies and children.
This product is not a toy. Do not treat this product os household waste.
Dispose of this device properly by handing it over to local collection
services for recycling of electronic equipment. By ensuring that this product
is properly disposed of, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handing. For more detailed information about this product,
please contact your local household waste disposal service or the shop where
you purchased this item.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B dlgltal device, pursuant to Part 15 of the FCC Rules. These
llmlts are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate r;idio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
Interference to radio or televlslon reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver ls connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device compiles with FCC RF radiation exposure llmfts set forth for on
uncontrolled environment. This transmitter must not be co – located or
operating in conjunction with any other antenna or transmitter. During the
operation of device a distance of 15 cm surrounding the device and 20 cm above
the top surface of the device must be respected.
Distributed by Quest USA Corp.
495 Flatbush Ave, Brooklyn NY 11225
© GOI.JOY a I.JOY are registered trademarks of Quest USA Corp. All other
trademarks and trade names are property of their respective owners.
Designed by GOIJOY a IJOY in New York. All rights reserved Quest USA Cocp.
Made in Chino.