ZOSI C688 WiFi Camera User Manual

September 9, 2024
ZOSI

ZOSI C688 WiFi Camera

What’s in the Box

NOTE : The number of accessories varies with the camera model you purchased.

Camera Structure Diagram

Features

Live Feed
Watch the camera’s live video in real-time through Zosi Smart App. Adjust the camera’s image quality,capture screenshots and record footage, and make a two- way communication.

Infrared Night Vision
The camera can automatically switch to night vision mode based on changes in the surrounding lighting conditions. It is equipped with built-in infrared lights that ensure clear visibility even in dark environments.

Video Playback
There are two recording storage options: Micro SD card and cloud storage. You can either install a Micro SD card or subscribe to a cloud storage plan to playback recorded footage.

Smart Detection
Detect motion or human presence and promptly send alarm notifications to the app, allowing you to check out at any time.

Install the Micro SD Card (Optional)
Make sure the camera is powered off. You can see the SD card slot on the side of the camera. Insert the Micro SD card with the contact side facing down into the card slot .
NOTE : When installing or removing the Micro SD card, make sure to power off the camera before proceeding to prevent damage to the Micro SD card. Please use Micro SD cards produced by reputable manufacturers. The device only supports the Fat32 format, so make sure the format of the MicroSD card installed is Fat32 before installation and use. It is recommended to use a Micro SD card with a minimum read/write speed of U1/Class 10.

Device Startup

Connect the power cord to the Type-C charging port of the camera, and the camera will automatically turn on.

App Installation

  1. Scan the QR code below to download free Zosi Smart App on your phone. (Both Android and Apple systems can scan to download, and also can search and download in App Store or Google Store.

Add Device

  1. Open Zosi Smart App and follow the prompts to register and log in.
  2. Tap “+” to add a device. Follow the in-app instructions to complete the network settings and addition of the device.

Installation Methods

  1. Please confirm that the device has been added to the App before installation.
  2. The camera can be placed flat on surfaces such as a desk, coffee table, or cabinet. It can also be attached to desired locations using the magnetic base.
  3. The camera can be mounted at the designated spot using the metal plate for ceiling or wall installation (no drilling required / drilling optional). Simply attach the camera magnetically for easy and convenient setup.

Ceiling/Wall Mounting Instructions

Method 1: No-Drill Installation

  1. Clean the wall surface and the surface of the metal mounting plate before installation.
  2. Tear off one side of the protective film from the double-sided tape. Apply the tape to the installation location, pressing firmly to remove air bubbles between the tape and the wall.
  3. Attach the metal mounting plate to the double-sided tape.
  4. Attach the camera to the metal mounting plate and adjust the camera angle.
    NOTE : Ensure the installation surface is clean, smooth and dry. This method is not suitable for uneven wood surfaces or plaster walls. It is recommended to wait at least 12 hours after applying the double-sided tape to the wall before installing the camera to ensure maximum adhesive strength.

Method 2: Drilling Installation

  1. Use the mounting template to mark and drill holes in the wall. Insert anchors into the drilled holes.
  2. Screw the metal mounting plate in place.
  3. Attach the camera to the metal plate and adjust the camera angle.

AVSS
Download and install Zosi AVSS Client, and following this guide to complete installation. Official download link: https://www.zositech.com/app/ , double-click “AVSS” icon, choose language and click log in. Note: It is recommended to log in with the account of Zosi Smart App to avoid multiple accounts using. Local login (No account and password required) Please scan the QR code below to watch the AVSS operation video.

FAQ

Q: Why is the device offline?
A : Please check whether the device is connected to the network and whether the router is functioning properly for internet access. Also, ensure that the router is enabled to automatically obtain an IP address.

Q: Why can’t I find video recording files?
A : Please check if the Micro SD card is damaged and if the date you are searching for has valid recorded files. Additionally, verify that the system time settings on the device are correct.

Q: Does the camera support motion detection and image capture?
A : It captures images automatically when people, cars, are detected or when there is a change in detected images. Users can also manually capture images using our ZOSI Smart APP.

Notification of Compliance

  1. FCC Compliance Statement
    This device complies with Part 15 of FCC Rules.
    Operation is subject to the following two conditions:

  2. This device may not cause harmful interference.

  3. This device must accept any interference received, including inference that. may cause undesired operation.

Simplified EU Declaration of Conformity
ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/53/EU.

Correct Disposal of this Product
This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure conditions. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals