HAYLOU T16 Anc Tws Bluetooth Ear Buds User Manual

: September 9, 2024
: Haylou

Table of Contents

T16 Anc Tws Bluetooth Ear Buds
Specifications:
Product Usage Instructions:
How to Wear:
Power-on:
How to Charge:
Power-off:
Stereo Mode:
Mono Mode Functions:
Factory Setting:
- FAQ:
Q: How do I reset the factory settings?
Q: How do I switch between stereo and mono modes?

T16 Anc Tws Bluetooth Ear Buds

“`html

Specifications:

Dimensions: 80mm x 55mm
Model: Haylou-T16
Connectivity: Bluetooth 5.0
Charging Port: Type C
Battery Capacity: 50mAh (earbuds), 600mAh (charging case)
Charging Time: 1.5 hours (earbuds), 3.5 hours (case)
Standby Time: Up to 140 hours
Input Voltage: 5V

Product Usage Instructions:

How to Wear:

Please adjust the earbud to fit yourself best.

Power-on:

Pick up the earbuds from the case to power them on. If the
earbuds are out of the case, tap the earbud twice to power on (LED
glows white for 1s).

How to Charge:

Top up both earbuds and the charging case before first-time use.
Charge both earbuds and the case via a USB cable. LED glows solid
red when the case is charging and turns white once topped up. Push
earbuds into the case (without a USB cable) to charge them. LED
blinks red slowly when earbuds are charging and turns off once they
are topped up.

Power-off:

Pop earbuds into the case to charge them. They will auto power
off once topped up. Earbuds will auto power off if no connection is
built in 5 minutes.

Stereo Mode:

To pair the earbuds manually, power off the earbuds and then
manually power them on again. The earbuds will auto enter TWS
pairing mode (LED blinks white promptly) and finish pairing when
LED on the master earbud blinks white slowly. On the cellphone,
search for the earbuds and tap to connect.

Mono Mode Functions:

Double tap left earbud: Skip track backward
Double tap right earbud: Skip track forward
Double tap either earbud: Answer/end call
Triple tap either earbud: Activate voice assistant
(standby)

Factory Setting:

If earbuds do not function well, refer to the following steps to
reset factory settings: Push earbuds back into the case, open the
lid, and triple click the case to set them to factory. Earbuds will
then auto pair with each other. The right earbud will serve as
master and become connectable to the cellphone when LED blinks
white slowly.

FAQ:

Q: How do I reset the factory settings?

A: To reset factory settings, push the earbuds back into the
case, open the lid, and triple click the case to set them to
factory.

Q: How do I switch between stereo and mono modes?

A: To switch between stereo and mono modes, follow the
instructions provided in the manual for manual pairing or using the
functions of each earbud.

“`

80 mm

55 mm

Haylou-T16

LED

TYPE C

2 1S

2

1S

5

2-3 TWS “Haylou-T16 RHaylou-T16 L”

1S

Haylou-T16 Haylou-T16 R

“Haylou-T16 RHaylou-T16 L”

/ /
L2
R2
2 /
3

15.0 5.0 ,
2APTX+AAC 3020iOS+Android
3
4
5 /
630 525
7 TAP-C
8 TWS+
9APP HAYLOU APP EQ APP

2 5

130
2 3

1
20 45
3 4
5 6

1
2 3(2) 4CCC
5
6

×3

10 50mAh 1.5 3.5 140 5V 100mA 5.0

5V 1000mA 5V 500mA 2.5 4 600mAh

Pb

Hg

Cd

Cr (VI) PBB PBDE

2- DIBP DEHP DBP

BBP

SJ/T11364 O:
(EU) 2015/863 X:
(EU)2015/863 ROHS

10

Haylou
Haylou: :
17
Haylou 2 1 5 Haylou 312 Haylou

Haylou T19

1. 2. 3.

1
2
3 4 5Haylou T16
6Haylou
T16

12()

1
2
3

,Haylou :5 13130313051306 4 www.haylou.com 4008-555-083

Haylou-T16 ANC TWS Bluetooth EarBuds User Manual

Overview
Pogo Pins

LED Microphone Charging Port Pogo Pins
LED

How to Wear Please adjust earbud to fit youself best.

Power-on
Pick up earbuds from the case to power them on. If earbuds are out of the case, tap earbud twice to power on(LED glows white for 1s).

How to Charge
Please top up both earbuds and charging case before first time use. Charge both earbuds and case via USB cable. LED glows solid red when case is charging and turns white once topped up. Push earbuds into case(with no USB cable) to charge them. LED blinks red slowly when earbuds are charging and turns off once they are topped up.

Tap twice

LED glows white for 1s

Power-off
Pop earbuds into the case to charge them. They will auto power off once topping up. Earbuds will auto power off if no connection is built in 5 minutes.

Stereo Mode
Auto connection: take up two earbuds from the case, they will auto power on and pair with each other in 3s(right earbud will serve as master as the default). When LED blinks slowly, search for Haylou-T16 R/L on phone and tap to connect. If earbuds fail to connect to phone, please pop them back into case and repeat the above steps. Earbuds will auto reconnect to the last device in connectivity records, if any. ( Bluetooth faculty needs to be activated ). Note: T19 has been set to factory before shipping out.

LED glows white for 1s

Haylou-T16 Haylou-T16 R

Manual pairing: power off earbuds then manually power on them again. Earbuds will auto enter TWS pairing mode(LED blinks white promptly) and finish pairing when LED on master earbud blinks white slowly. On cellphone, search the earbuds and tap to connect.

Mono Mode
Auto connection: take up either earbud from the case. The earbud will auto power on and LED will then blink white slowly. On cellphone, search for Haylou T16 and tap to connect the earbud to cellphone. Once power on, earbud will auto reconnect to the last device in connectivity records, if any. ( Bluetooth faculty needs to be activated ). Manual pairing: power off earbuds then manually power on either earbud. When LED on the earbud blinks white slowly, search for the earbud and tap on cellphone to connect.
Functions
Double tap left earbud Skip track backward
Double tap right earbud Skip track forward
Double tap either earbud Answer/end call
Triple tap either earbud Activate voice assistant (standby)

Product features
1Bluetooth 5.0 true wireless, just pick it up New generation bluetooth 5.0 chip, get rid of traditional bluetooth headsets and wired ears Cable trouble, lower latency, more convenient and free experience.
2Four-way microphone noise reduction Four-way microphone accurately pick up sound, depth of the elimination of environmental background sound, face to face hd phone experience.
3Vibration feedback sensor, precise operation Knock once, you can answer and hang up, the previous song/the next song.
4Play music continuously for 30 hours Ultra-low power consumption, triple increase endurance.5 hours of continuous playback on one charge;The charging box provides 25 hours of power.
5Wireless charging Tap-c charging interface with efficient wireless charging, which can accept charging from mobile phones and wireless charging devices.The remaining charge of the charging cabin will be watched at any time, and real- time reminder will be given for timely charging.

Factory Setting If earbuds do not function well, please refer the following steps to reset factory: Push earbuds back into the case, open the lid and triple click the case to set them to factory. Earbuds will then auto pair with each other. Right earbud will serve as master and become connectable to cellphone when LED blinks white slowly. (If earbuds stay in the case, they will only be charged after pairing with each other).
Audio only outputs from single earbud
It’s really rare. Please reset GT1 Pro, remove connectivity record on your cellphone and re-connect the earphones to your cellphone.
Other cases in charging
LED glows solid white for 1 minute when earbuds are topped up. Carry case cannot charge earbuds, if its battery drains. LEDs on carry case will turn off once the case is topped up. If you charge it once again, LEDs will not give any notice, which does not mean the case is not charged.

Daily maintenance
Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth after use in pursuing a longer service life.
Caveats
1. Please charge the product, in case it has not been used over two weeks. 2. Please use certificated charger. 3. Do not wear earphones for a long term to protect your hearing. 4. Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.

What’s in the Box
Eartips * 3 pairs(medium size eartips have been put on), earbuds, charging case, USB cable, user manual.
Basic Parameters(earbuds)
Operation range: 10m ( open space with no obstacle )
Battery capacity: 40mAh(single earbud) Charging time: approx. 2hr Talk time: approx. 5hr Standby time: approx. 140hr Input parameter: 5V 100mA Battery type: li-ion Bluetooth version: v5.0
Basic Parameters(charging case)
Input parameter:5V 500mA Output parameter:5V 150mA Charging time: approx. 2.5hr Standby time: approx. 4 months Battery capacity: 600mAh Battery type: li-ion

Daily maintenance
Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth after use in pursuing a longer service life.
FCC Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
-Reorient the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Aftersales & Support
Warranty Period: 12 months after purchase (please keep your receipt properly)
Free Service: If any quality defects happen during the warranty period, please take the receipt and contact with your distributor for aftersales service.
Following cases or any damages/defects that are not due to quality issue are not covered in the warranty. 1. Any defects or damages caused by natural disasters, abnormal voltage or other environmental facts. 2. Any unauthorized disassembly, modification or change of parts. 3. Any damages caused by improper use of the product including soaking, corroding, falling down, squeezing or exposure to abnormal temperature or humidity.
Model Number: Date of Purchasing: User’s Name:
User’s Phone: User’s Address: Shop’s Name:
Shop’s Address: Comments:

FCC ID: 2AMQ6-T16 CMIIT ID: XXXXXXXXXX