ROULE RL-9805TX Wireless Door Magnetic Doorbell User Manual
- September 7, 2024
- ROULE
Table of Contents
RL-9805TX Wireless Door Magnetic Doorbell
Technical Specifications
- Product Name: Wireless Remote Control Doorbell
- Ringtones: 60
- Volume Adjustment: 5 levels
- Indicator: Color changing LED
- Technology: Learning code to avoid interference
- Battery: DC3.0V (CR2032*1)
Product Usage Instructions
Function Keys
- A. Remote Control
- B. Receiver
- Indicator
- Push button
- Speaker
- Color changing LED indicator
- Previous/ Mode Selection
- Next/Pair
- Volume Adjustment / Clear Code
Instructions
Mode Selection
Long press the button on the side of the receiver for 3 seconds
to switch between Ringtone Only and Ringtone with Light Flashing
modes.
Ringtone Selection
Press the buttons on the side of the receiver to select the
previous or next ringtone from a total of 60 ringtones
available.
Volume Adjustment
Press the button on the side of the receiver to adjust the
volume. Choose from five levels: Mute with flashing light, Low,
Medium, High, Max.
Pairing
Long press the button on the side of the receiver for over 3
seconds to enter pairing mode. Press the Push button on the remote
control to complete pairing. Up to 20 remote controls can be paired
to one receiver.
Clearing Code
Long press the button on the side of the receiver for over 5
seconds to clear all remote control codes.
Power Indicator
Each time the receiver is powered on, it will sound DingDong to
indicate successful connection to the power supply.
Indicator Light
When a ringtone plays, the indicator on the receiver will flash
accordingly. The remote control’s indicator light will be on when
the Push button is pressed.
FAQ
Q: How many ringtone options are available?
A: There are a total of 60 ringtone options.
Q: How many remote controls can be paired to one receiver?
A: Up to 20 remote controls can be paired to one receiver.
Q: How do I clear all remote control codes?
A: Long press the Clear Code button on the receiver for over 5
seconds to clear all remote control codes.
! CAUTION
1. Risk of explosion if the battery is replaced by an incorrect type; 2.
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a
battery, that can result in an explosion; 3. Leaving a battery in an extremely
high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas; 4. A battery
subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas. 5. Do not ingest battery, Chemical Burn
Hazard. 6. This product contains a coin / button cell battery. If the coin /
button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to
death. 7. Keep new and used batteries away from children. If the battery
compartment does not
close securely, stop using the product and keep it away from children. If you
think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Note: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: -Reorient or relocate the receiving antenna. -Increase the
separation between the equipment and receiver. -Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device
has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
NOTICE: This manual is for the purpose of product use and operation. Design
and specifications are subject to change without notice.
3
Version 1.1
Wireless Remote Control Doorbell
USER MANUAL
60 ringtones. 5 levels for volume adjustment. Color changing LED indicator.
Adopt learning code technology to effectively avoid
interference.
FUNCTION KEYS
A. Remote Control
B. Receiver
Indicator
Push button
Speaker
Color changing LED indicator
Previous/ Mode Selection
Next/Pair
Volume Adjustment /Clear Code
INSTRUCTIONS
Mode Selection: Long press the ” ” on the side of the receiver for 3 seconds
to switch the modes between Ringtone Only and Ringtone with Light Flashing.
Ringtone Selection: Press the ” ” or ” ” on the side of the receiver to select
the previous or next ringtone. There are 60 ringtones in total for selection.
Volume Adjustment: Press ” ” on the side of the receiver to adjust the volume.
Five volume levels can be selected, i.e., Mutewith flashing light
/Low/Medium/High/Max.
Pairing: Long press ” ” on the side of the receiver for over 3 seconds, it
will sound “Ding -Dong” to indicate that it has entered into the pairing
state. Now, press the Push button on the remote control, when the receiver
sounds the ringtone selected, the pairing is successful (Follow the
instruction to pair one remote control to the receiver. To pair more, repeat
the instruction. Max 20 remote controls can be paired to one receiver).
Clearing Code: Long press ” ” on the side of the receiver for over 5 seconds,
it will sound “Ding-Dong, Ding-Dong” to indicate that clearing code is
successful (This action will clear the code for all remote controls).
Power Indicator: Each time the receiver is powered on, it will sound
“DingDong” to indicate that connecting to power supply works well.
Indicator Light: When the receiver plays a ringtone, the indicator on its
front will flash in accordance with the ringtone. When pressing the Push
button on the remote control, the indicator light on the remote control will
be on.
1
PACKAGE CONTENTS
RL-3895: Receiver ×1, Remote Control ×1, 3M sticker ×1, Battery (CR2032) ×1
RL-3895B: Receiver ×1, Remote Control ×2, 3M sticker ×2, Battery (CR2032) ×2
RL-2R3895: Receiver ×2, Remote Control ×1, 3M sticker ×1, Battery (CR2032) ×1
PREPARATION BEFORE USE
TECHNICAL SPECIFICATIONS
Remote Control
Remote Control
1
2
3
Battery: DC3.0V (CR2032*1)
Standby Current: <2uA
Working Current: <25mA
Transmitting Time: 2.2s/transmission
1. Pull the insulator from the battery. 2. Paste the 3M sticker onto the back
of
the remote control. 3. Attach the remote control onto a wall
or a door.
Installing the battery to the remote control
Transmitting Power: <10dBm Frequency: 433.92MHz±250KHz Working Temperature:
-15°C~50°C Use Environment: Indoor or Outdoor
Receiver
Power: AC 100V~240V 50Hz/60Hz Standby power consumption: 0.5W Working power
consumption: 1.5W
1
2
CR2032
When installing the battery to the remote control, make sure the positive side
faces upward.
IC Caution:
Low: 68-74dB
Volume (30cm)
Medium: 74-80dB High: 80-86dB
Max: 86-92dB
Demodulation: OOK
Frequency: 433.92MHz±250KHz
Distance: 150~300m (Open Area)
Working Temperature: -10°C~50°C
Use Environment: Indoor
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux apparei ls radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.
L ‘ a p p a r e i l a é t é é v a l u é p o u r r é p o n d r e a u x e x i g e n c e s g é n é r a l e s
d ‘ e x p o s i t i o n R F . L ‘ a p p a r e i l p e u t ê t r e u t i l i s é d a n s d e s
c o n d i t i o n s d ‘ e x p o s i t i o n p o r t a b l e s s a n s r e s t r i c t i o n .
2