GOODWE LX A5.0-10 LX A5.0-30 Residential Smart Inverter Solutions User Guide

GOODWE LX A5.0-10 LX A5.0-30 Residential Smart Inverter Solutions

Product Information

Specifications

• Residential Smart Inverter Solutions
• Model : ES Uniq 8-12kW+Lynx Home A/Lead-acid battery
• Version : V1.0-2024-07-30
• Inverter Models:
  • GW8000-ES-C10
  • GW10K-ES-C10
  • GW12K-ES-C10
• Battery System Models:
  • LX A5.0-10
  • LX A5.0-30

Product Usage Instructions

• Networking
  WARNING: Information in this guide is subject to change. Always follow safety precautions in the user manual unless specified otherwise.

• Power On/Off
  For single-inverter systems and multi-inverter systems, refer to the user manual for specific instructions.

• Installations
  Follow the detailed installation guide provided in the user manual for setting up the system correctly.

• Wiring Diagram
  Refer to the wiring diagram corresponding to your system configuration for proper installation.

• Equipment Commissioning
  Use the SolarGo app or SEMS Portal app for equipment commissioning. Ensure software versions are compatible.

• Quick Settings
  Access quick settings by tapping Home > Settings > QuickSettings. Use the installer password “goodwe2010” to configure settings step by step.

• Setting Advanced Parameters
  Access advanced settings by tapping Home > Settings > Advanced Settings. Configure functions like DRED, Remote Shutdown, Power Limit, etc., based on your requirements.

• Configuring the Network
  Set network parameters through Home > Settings >Communication Setting. Use WiFi/LAN Kit-20 for network configuration.

• Creating a Power Plant
  Create power plants and add equipment via the SEMS Portal app. Follow on- screen instructions and enter accurate plant information.

WARNING
The information in this quick guide is subject to change due to product updates or other reasons. This guide cannot replace the product labels or the safety precautions in the user manual unless otherwise specified. All descriptions in the manual are for guidance only.

Power On/Off

Single inverter system

Multi-inverter system

Installations

Wiring Diagram

ES Uniq 8-12kW (single) + Lynx Home A or Lead-acid battery + Builit-in smart meter + WiFi/LAN Kit-20

ES Uniq 8-12kW (single) + Lynx Home A or Lead-acid battery + GMK110 + WiFi- LAN Kit-20

ES Uniq 8-12kW (parallel connected) + Lynx Home A or Lead-acid battery + GM330 + Ezlink3000

Battery System Wiring Diagram

Equipment Commissioning

In parallel scenarios, the software version of SolarGo app should be 5.4.0 or above. Follow the prompts to connect the device.

Quick Settings

Tap Home > Settings > Quick Settings to complete quick settings step by step. Installer password: goodwe2010

Setting the BAT Connect Mode

Setting the Working Mode

Setting the Advanced Parameters
Tap Home > Settings > Advanced Settings to set the following functions.

Setting GEN port

Configuring the Network
Tap Home > Settings > Communication Setting to set network parameters.

Creating a Power Plan
Create power plants and add equipments via SEMS Portal app.

GoodWe Technologies Co., Ltd.

• No. 90 Zijin Rd., New District,
• Suzhou, 215011, China
• www.goodwe.com
• service@goodwe.com

FAQ

Q: Can I connect more than 30 batteries in parallel in one system?
A: No, the maximum number of batteries that can be connected in parallel is 30 as per product specifications.

Q: How do I enable the Remote Shutdown function?
A: To use the Remote Shutdown function, turn on the switch in the advanced settings as described in the user manual.

Q: What is the maximum allowable total voltage for batteries connected in series?
A: The total voltage of batteries connected in series should not exceed 60V as per safety regulations.

References

• 固德威——以光伏逆变器为核心的整体解决方案服务商

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>